Series 508 Open-Frame Capacitor Socket w/Collet Contacts & Wire Wrap Pins FEATURES • Capacitor bypasses unwanted electromagnetic noise • Available with 0.1µF or 0.33µF Capacitor, 50V, Z5U temperature coefficient • Open frame allows for more efficient utilization of board space and better cooling • Compatible with Automatic Insertion Equipment • Side-to-side and End-to-end Stackable GENERAL SPECIFICATIONS • BODY MATERIAL: black UL 94V-0 glass-filled Nylon • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16-85 • PIN BODY PLATING: either 10μ [0.25μ] min. Au per MIL-G-45204 or 200μ [5.08μ] min. 93/7 Sn/ ORDERING INFORMATION Pb per ASTM B545 or 200μ [5.08μ] min. Sn per ASTM B545 Type 1 over 100μ [2.54μ] min. Ni per SAE AMS-QQ-N-290 XX-X 508-X XXX X • 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM-B194-01 Capacitor • CONTACT PLATING: 30μ [0.76μ] min. Au per MIL-G-45204 over 50μ [1.27μ] min. 1= 0.1µF Ni per SAE AMS-QQ-N-290 2= 0.33µF • CONTACT CURRENT RATING: 3 amps Plating • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] Sn : -67°F to 0= Au Collet, Sn Shell 257°F [-55°C to 125°C] Au 0TL= Au Collet, Sn/Ph Shell • INSERTION FORCE: 180g/pin 1= Au Collet & Shell • WITHDRAWAL FORCE: 90g/pin Termination • NORMAL FORCE: 140g/pin; based on a 2= 2-level Wire Wrap 3= 3-level Wire Wrap 0.018 [0.46] dia. test lead • ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia. Series • LEAD LENGTHS: from 0.100 [2.54] min. Row-to-Row Spacing, “Y” Dim. 3= 0.300 [7.62] 4= 0.400 [10.16] 6= 0.600 [15.24] MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.045 ±0.002 [1.14 ±0.05] dia. No. of Pins (See Table) Frame Style No. of Ribs B 2 C ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED OPEN FRAME COLLET SOCKET w/WIRE WRAP PINS, SEE DATA SHEET 12016 OPEN FRAME COLLET SOCKET w/SOLDER PIN TAILS, SEE DATA SHEET 12017 OPEN FRAME SURFACE MOUNT SOCKET, SEE DATA SHEET 12018 OPEN FRAME COLLET CAPACITOR SOCKET w/SOLDER PIN, SEE DATA SHEET 12026 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS 3 Centers “Y” Dim. “Z” No. of Pins 0.300 [7.62] 0.400 [10.16] 14, 16, 18, 20 0.400 [10.16] 0.500 [12.70] 20, 22, 24 0.300 [7.62] 0.400 [10.16] 24, 28 0.600 [15.24] 0.700 [17.78] 24, 28, 32, 40 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 12027 Rev. 1.3 1 of 1