Series 810 & 822 Economy Vertisocket w/Bifurcated Contacts TM FEATURES • High-volume Vertical Display Mounting Applications • Useful for Connection of Board-to-Board Jumpers and DIP Switches, as well as LED Devices GENERAL SPECIFICATIONS • STANDARD BODY MATERIAL: black UL 94 V-0 4/6 Nylon • BIFURCATED CONTACTS: Grade-A spring-tempered Phosphor Bronze per QQ-B-750 • STANDARD CONTACT PLATING: 50μ [1.27μ] min. matte Sn per ASTM B545-97 over 50μ [1.27] Ni per QQ-N-290 –OR– 90/10 Sn/Pb per MIL-T-10727 Type 1 over 50μ ORDERING INFORMATION [1.27] Ni per QQN-290 XX-822-90 E XXXX • CONTACT CURRENT RATING: 1 amp • OPERATING TEMPERATURE: 221°F [105°C] 14-810-90R XXXX • INSERTION FORCE: 110g/pin average Optional Rail & Plating • WITHDRAWAL FORCE: 75g/pin average WR=Without Rails • FLAT LEADS: up to 0.014 [0.36] thick and 0.020 [0.51] wide TL=Sn/Pb • ROUND LEADS: up to 0.020 [0.51] dia. WRTL=Without Rails, Sn/Pb • LEAD LENGTHS: 0.75-0.160 [1.91-4.06] dia. Economy Version Display Angle Series Pin Count (See Table) MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE For P/N 14-810-90R = 0.036 ±0.002 [0.91 ±0.05] dia. For P/N XX-822-90E = 0.044 ±0.002 [1.12 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR HORIZONTAL MOUNTING, SEE DATA SHEET 13005 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Body Style Dim. “Y” Dim. “Z” Pin Count A 0.450 [11.43] 0.300 [7.62] 8, 10 B 0.750 [19.05] 0.600 [15.24] 8, 10, 12, 14, 16 B 0.850 [21.59] 0.700 [17.78] 8, 10 B 0.950 [24.13] 0.800 [20.32] 8, 10, 12, 14, 16 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 13003 Rev. 6.1 1 of 1