Series 354000 DIP-to-SOIC Adapter FEATURES •Convenient, cost-effective means of converting DIP-to-SOIC PC board layouts. GENERAL SPECIFICATIONS •SOCKET BODY: black, UL 94V-0 glass-filled 4/6 Nylon 170°C continuous use temp •PCB: FR-4, 0.062 [1.58] thick •MALE ADAPTER PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •FEMALE CONTACT PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/ B16M •FEMALE PIN PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08 •FEMALE CONTACT PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 50µ [1.27µ] Ni per SAE AMS-QQ-N- 290 •CONTACT CURRENT RATING: 3 amps •OPERATING TEMPERATURE: 221°F [105°C] •INSERTION FORCE: 180g/pin; based on a 0.018 [0.46] dia. test lead •WITHDRAWAL FORCE: 90g/pin; based on a 0.018 [0.46] dia. test lead •NORMAL FORCE: 140g/pin; based on a 0.018 [0.46] dia. test lead •SOCKET ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia., 0.100-0.125 [2.54-3.18] long MOUNTING CONSIDERATIONS •SUGGESTED PCB SOLDER PAD SIZE: 0.028 [0.71] min. width CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION XX-354000-X 0 Pins 8, 14, 16, 20, 24, 28 Series Adapter Pin Options (see P/N Suffix Table) 1 = Short Adapter Pin 2 = Long Adapter Pin Plating Sn/Pb ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED P/N Suffix -10 -20 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Pins 8 14 16 20 24 28 Dim. “A” 0.400 [10.16] 0.700 [17.78] 0.800 [20.32] 1.000 [25.40] 1.200 [30.48] 1.400 [35.56] Dim.“B” 0.400 [10.16] 0.600 [15.24] 0.700 [17.78] 0.900 [22.86] 1.100 [27.94] 1.300 [33.02] Dim. “X” 0.265 [16.73] 0.325 [8.26] Dim.“C” 0.100 [2.54] 0.300 [7.62] 0.350 [8.89] 0.450 [11.43] 0.550 [13.97] 0.650 [16.51] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED Dim. “Y” 0.050 [1.27] 0.110 [2.79] Dim.“D” 0.125 [3.175] 0.225 [5.72] 0.225 [5.72] 0.275 [6.99] 0.325 [8.26] 0.375 [9.53] 18009 Rev. AB