BCM8105 ® MULTIRATE 10-GBPS CDR/DEMULTIPLEXER WITH ELECTRONIC DISPERSION COMPENSATION SUMMARY OF BENEFITS FEATURES • Fully integrated CDR and demultiplexer with AGC and electronic dispersion compensator • Extends the reach of single-channel and DWDM links • Improves optical link budget • Compensates 3000-ps/nm chromatic dispersion • Compensates 50 ps of digital group delay caused by PMD • Reduces need for expensive optics and passive dispersion compensation components • 1:16 demultiplexer (DEMUX) with LVDS outputs • Reduces system and maintenance cost • Very low power dissipation • Enables fast system design cycles • AGC with wide dynamic input range • High integration and low power dissipation enable lower-cost and higher-density systems • Channel quality monitor APPLICATIONS • Phase and threshold adjust • Two-wire interface • SONET/SDH transmission equipment and modules • Supports multiple data rates (OC-192, 10GE, FEC) • Multiservice provisioning platforms • Exceeds SONET/SDH jitter requirements • Add and drop multiplexers • 10-Gbps MSA compliant • Cross-connects • 1.8V power supply • ATM equipment • 1.8V or 3.3V CMOS I/Os • SONET/SDH measurement equipment • 15 x 15-mm 150-pin BGA package • Routers and switches OTX ORX BCM8105 BCM8128 ORX BCM8105 OTX BCM8128 Network Interface Processor Network Interface Processor BCM8105 Functional Block Diagram OVERVIEW RB_LD TH_LOS0/1/2 SLOSB LOSB Los Detect RB_SLOS POLSEL RxDOUT0P CML Serial Input RDINP RxDOUT0N Equalizer 1:16 DEMUX Output Register AGC RDINN RB_OFFSETP/N ENB_OFFSET Channel Quality Monitoring 2-Wire Interface RxDOUT15P RxDOUT15N LSBSEL LVDS Parallel Outputs LVPECL Reference Clock Input RxPOCLKP RxREFCLKP Divide-by-16 RxPOCLKN RxREFCLKN CDR RxRATESEL0/1 RxMUTEDOUT VCP RxMCLKP Divide-by-4 VCN RxLCKREF RxMCLKN RxREFSEL RxMUTEPOCLK RxMUTEMCLK RxLOCKERR RxPHSADJ0/1/2 BCM8105 BCM8105 Block Diagram The BCM8105 is a fully integrated, MSA-compliant, multirate SONET/ SDH/10GE receiver supporting OC-192, 10 GbE, and FEC (forward error correction) datarates. The product integrates a high-performance clock and data recovery (CDR), 1:16 demultiplexer, electronic dispersion compensator (EDC), loss of signal (LOS) detection circuitry, and an advanced feature set. The BCM8105 provides high jitter tolerance and low jitter generation to comply with Optical Internetworking Forum (OIF), IEEE 802.3™ae, Telcordia®, ANSI, and ITU-T standards. The BCM8105 reference clock input frequency is user-selectable to the line rate divided by either 16 or 64. The reference clock output and the LVDS receive parallel bus output can be squelched under user control. The BCM8105 can be powered with a single 1.8V supply or a dual 1.8/ 3.3V supply without any special power supply sequencing requirements. The BCM8105 comes in a 15 x 15-mm, 150-pin BGA package. Broadcom®, the pulse logo, Connecting everything®, and the Connecting everything logo are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2006 by BROADCOM CORPORATION. All rights reserved. 8105-PB03-R 04/14/06 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com