BCM8109 ® MULTIRATE 10-GBPS SONET/SDH/10GbE/FC/FEC DEMUX SUMMARY OF BENEFITS FEATURES • 10-Gigabit MSA (Multi-Source Agreement) compliant • Compliant® with Optical Internetworking Forum (OIF), • Fully integrated CDR and demultiplexer with limiting amplifier supports multiple data rates: OC-192, 10GbE, FC, and their FEC data rates. Telcordia , ITU-T, ANSI, and IEEE 802.3ae industry standards. • Reduces design cycle and time-to-market. • 1:16 DEMUX with LVDS data outputs • High level of integration allows for higher port density • Phase adjustment (typical 35-ps range with 2.5-ps granularity) • Uses the most effective silicon economy of scale for CMOS- solutions. based devices. • Adaptive decision threshold level adjustment • Low-power consumption eliminates the need for external • Serial data polarity inversion selection cooling sources. • Bit order reversal selection APPLICATIONS • Lock detect • Exceeds SONET jitter requirements • OC-192/STM-64/10GE transmission equipment • Core power supply: 1.2V • SONET/SDH optical modules • I/O power supply: CML and LVDS at 1.2V, CMOS at 1.2V or 3.3V • ADD/DROP multiplexers • Digital cross-connects • Power consumption: 950 mW • ATM switch backbones • Standard CMOS fabrication process • SONET test equipment • 143-pin BGA package available in standard and Pb-free • Terabit routers version • Edge routers BCM8108 ORX ORX BCM8109 10-Gb Serial Data BCM8109 XSBI (16-Bits) Parallel Data ORX ORX BCM8108 Network Interface Processor Network Interface Processor BCM8109 Functional Block Diagram XSBI (16-Bits) Parallel Data OVERVIEW RB_LVDSOUT RxMCLKSEL RxMUTEMCLKB RxMUTEPOCLKB RxMUTEDOUTB RxPOLSEL RxLSBSEL A A RxDOUTP[15:0] RxDOUTN[15:0] Limiting Amplifier RDINP RDINN 1:16 16 Demux Output Register A RxPOCLKP RxPOCLKN OFFSETP/N ENEXT_OFST RxREFCLKP RxREFCLKN Multirate CDR A VCP/VCN_CDR RxRATESEL1/0 RxREFSEL RxLKREFB RxMCLKP RxMCLKN SCL RxREFCKENB RXPHSADJ[2:0,FINE] RB_ALOSB TH_ALOSB[2:0] BSC I/F SDA LOS Detection The BCM8109 is a fully integrated MSA-compliant multirate SONET/ SDH/10GE/FC/FEC receiver operating at OC-192 (9.953 Gbps), 10GE (10.3125 Gbps), 10GFC (10.315 Gbps), or different FEC (Forward Error Correction) data rates (10.664/10.709, 11.096, or 11.31 Gbps). The BCM8109 provides deserializer, clock and data recovery (CDR), and loss-of-signal (LOS) detection circuitry and an advanced feature set that includes phase adjustment and adaptive decision threshold adjustment. The BCM8109 provides high-jitter tolerance and low-jitter generation to comply with Optical Internetworking Forum (OIF), IEEE 802.3ae, Telcordia, ANSI, and ITU-T standards. ALOSB The BCM8109 reference clock input frequency is user-selectable to the line rate divided by either 16 or 64. The reference clock output and the LVDS receive parallel bus output can be squelched under user control. The BCM8109 can be powered with a single 1.2V supply or dual 1.2/ 3.3V supply without any special power supply sequencing requirements. The BCM8109 is a register-based device; settings can be controlled via the Broadcom Serial Control (BSC) interface. The BCM8109 comes in a 15 mm x 15 mm, 143-pin BGA package. Broadcom®, the pulse logo, Connecting everything®, and the Connecting everything logo are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2006 by BROADCOM CORPORATION. All rights reserved. 8109-PB00-R 10/11/06 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com