Diodes SMD Type Rectifier Diodes 1N4001A ~ 1N4007A DO-214AC(SMA) Unit: mm 4.32 4.12 4.597 3.988 ■ Features 2.126 1.397 ● Low forward voltage drop 2.896 2.22 2.489 2.02 1 2 ● High current capability 2.75 2.55 5.87 5.67 5.668 4.925 ● Easy pick and place ● High surge current capability ● Plastic material used carries Underwriters 2.438 1.981 Recommended Land Pattern Laboratory Classification 94V-0 1.524 0.762 0.203 0.051 0.305 0.152 ■ Absolute Maximum Ratings Ta = 25℃ Symbol 1N 4001A 1N 4002A 1N 4003A 1N 4004A 1N 4005A 1N 4006A 1N 4007A Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 RMS Voltage VRMS 35 70 140 280 420 560 700 Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Parameter Forward Voltage @ 1A IFAV Peak Forward Surge Current @ 8.3ms IFSM Maximum DC Reverse Current Ta=25℃ 1 40 30 5 IR Ta=125℃ V 1.1 VF Averaged Forward Current.TT=100℃ Unit A μA 50 Maximum Reverse Current *1 trr 1.5 us Typical Junction Capacitance *2 Cj 12 pF Thermal Resistance Junction to Ambient RθJA 75 85 Thermal Resistance Junction to Lead *3 RθJL 27 30 Junction Temperature Tj 150 Storage Temperature Tstg -55 to 150 ℃/W ℃ * 1 Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A * 2 Measured at 1 MHz and Applied VR=4.0 V ■ Marking NO. Marking 1N4001A 1N4002A 1N4003A 1N4004A 1N4005A 1N4006A 1N4007A M1 M2 M3 M4 M5 M6 M7 www.kexin.com.cn 1 Diodes SMD Type Rectifier Diodes 1N4001A ~ 1N4007A 1.2 FIG.2- TYPICAL REVERSE CHARACTERISTICS FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 100 1.0 0.8 INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) ■ Typical Characterisitics 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 o LEAD TEMPERATURE. ( C) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) 100 Tj=125 0C 1 Tj=75 0C 0.1 Tj=25 0C 0.01 50 0.001 20 1N40 10 0 1 A -1 N400 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 6A 1N4007A 5 FIG.5- TYPICAL FORWARD CHARACTERISTICS 8.3ms Single Half Sine Wave Tj=Tj max 2 1 1 100 2 5 10 20 50 50 100 INSTANTANEOUS FORWARD CURRENT. (A) NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE.(pF) 10 50 Tj=25 0C f=1.0MHz Vsig=50mVp-p 20 10 5 2 1 0.01 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 1 0.1 10 0.01 0.4 100 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) REVERSE VOLTAGE. (V) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A (+) 50Vdc (approx) (-) (-) DUT PULSE GENERATOR (NOTE 2) NON INDUCTIVE OSCILLOSCOPE (NOTE 1) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 2 www.kexin.com.cn 0 -0.25A (+) -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm 1.6 1.8 2.0