- HiTRON Electronics Corporation

H HiTRON
UNIVERSAL INPUT AC-DC EXTERNAL DESKTOP
SWITCHING ADAPTER 50-60 WATTS SINGLE, DUAL &
TRIPLE OUTPUT HES61 SERIES
FEATURES:

ACCOMMODATE UNIVERSAL AC INPUT

DESKTOP IEC 320-C14 AC RECEPTACLE

INPUT & OUTPUT LAMPS INDICATION

MEET UNIVERSAL SAFETY STANDARDS

EMI MEET EN55022 / FCC CLASS B

CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typical 90-264Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typical 50-60 Watts.
Output Connection: Optional.
Output LED indicator: Installed.
Line Regulation: Typical 0.1%.
Load Regulation: Main O/P VO1 typical ±1.5-3.0%.
Aux. O/P VO2 typical ±3.0-5.0%. (Stacked on VO1).
Aux. O/P VO3 typical ±1.0-2.0%. (P. R. installed).
Noise & Ripple: Typical 1.0% peak to peak.
OVP: Built-in on main output by crowbar.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
Input Connector: 3 pole AC inlet IEC320-C14(DT7).
On-Off Switch: Option for Rocker switch with lamp.
Input Frequency: 47-63Hz.
Inrush Current: Typical 20A at 230Vac.
Input Current: Typical 1.3A at 115Vac, 0.6A at 230Vac.
Dielectric Withstand: Meet IEC60950.
EMI: Meet EN55022 / FCC Class B.
Hold-up Time: Typical 15mS at115Vac,
Typical 75mS at 230Vac.
No Load Operation: No damage at no load.
GENERAL SPECIFICATION
Efficiency: Typical 75-80%. (various with output voltage)
Switching Frequency: Approximate 44K Hz.
Circuit Topology: Fixed Frequency Flyback circuit.
Transient Response: Output voltage returns in less than
5mS following a 25% load change.
Safety Standard: Meet UL1950/ EN60950 Class I.
Power Density: 1.1-1.36 Watts / Cubic inch.
Operating Temperature: 0 to +40°C.
(various with output voltage)
Storage Temperature: -20 to +85°C.
Temperature Coefficient: 0.04%/ °C.
Cooling: Free air convection.
Construction: Impact resistant thermo-plastic
enclosure case with venting slots.
Desktop Format.
NOTE: (1) The exact voltage regulation obtainable depends upon the cord selected and load current.
(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (unit ±%).
For the multi-output, the main output remains 50% load and other aux. output remains 20% load.
(3) The typical cord length 1 meter (about 3.3ft.), AWG#18 cord for various load conditions.
(4) Due to requests in market and advances in technology, specifications subject to change without notice.
For the details of safety approval, please consult the factory.
Hitron Electronics Corporation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan
TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com
1
OUTPUT VOLTAGE / CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO.
DUAL OUTPUT
MAIN O/P★@
TYP.
VOLT.
HES61-10
9.0A
5.0Vdc #
HES61-11
4.2A
HES61-11A
MODEL NO.
MAIN O/P VO1@★
AUX. O/P +VO2 † or-VO3 ●
TYP.
VOLT.
MAX.
TYP.
VOLT.
MAX.
HES61-20
7.0A
+5Vdc
9.0A
0.75A
-5Vdc
1.0A
12.0Vdc
HES61-21
5.0A
+5Vdc
8.0A
2.00A
+12Vdc
3.0A
4.0A
13.2Vdc
HES61-21A
7.5A
+5Vdc
9.0A
0.50A
+12Vdc
1.0A
HES61-12
3.4A
15.0Vdc
HES61-22
5.0A
+5Vdc
8.0A
1.60A
+15Vdc
2.0A
HES61-13
2.2A
24.0Vdc
HES61-23
5.0A
+5Vdc
8.0A
1.00A
+24Vdc
1.5A
HES61-19
9.0A
HES61-25
2.0A
+15Vdc
3.0A
1.70A
+8Vdc
2.0A
3.3Vdc #
TRIPLE OUTPUT
AUX. O/P VO2 †
MAIN O/P VO1 ★@
MODEL NO.
AUX. O/P VO3 ●
TYP.
VOLT.
MAX.
TYP.
VOLT.
MAX.
TYP.
HES61-30
5.0A
+5Vdc
8.0A
1.50A
+12Vdc
2.0A
0.5A
-12Vdc
1.0A
HES61-31
5.0A
+5Vdc
8.0A
1.50A
+12Vdc
2.0A
0.8A
-5Vdc
1.0A
HES61-32
5.0A
+5Vdc
8.0A
0.75A
+24Vdc
1.0A
0.5A
-12Vdc
0.9A
HES61-33
5.0A
+5Vdc
8.0A
1.50A
+15Vdc
2.0A
0.5A
-5Vdc
1.0A
HES61-34
5.0A
+5Vdc
8.0A
1.50A
+15Vdc
2.0A
0.2A
-15Vdc
0.4A
VOLT.
MAX.
Symbol: "†" Stacked on main output. "●" Installed with Post of Regulator (P.R.). "★" OVP built-in.
"#" Remote sense. "@" Adjustable.
Remark: (1) At least 20% of typical main output current is required to maintain stated regulations.
(2) Max. Load (maximum load) is the continuous operating load of each rail,
but the max. load of each rail can’t be drawn from all outputs at the same time.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 531.0g (18.73 Oz.)
Hitron Electronics Corporation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan
TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com
2