Leddar d-tec Traffic Sensor

Traffic Sensor
A
solution
LED-BASED
DETECTION SOLUTION
LeddarTM d-tec, for optimized results
LeddarTM, a unique patented technology
The LeddarTM d-tec is a traffic sensor offering accurate stop bar and
LeddarTM (Light Emitting Diode Detection and Ranging) is a novel de-
advanced detection. Thanks to patented LeddarTM detection technology,
tection and ranging technology created by LeddarTech that performs
it compiles data thousands of times per second, procuring accurate
time-of-flight measurement using pulses from visible or infrared LEDs.
and consistently reliable detection in any environmental conditions.
Combining multiple independent active elements, typically 16, into a
Providing lateral positioning in the field of view, it ensures that vehicles
single sensor, LeddarTM continuously provides rapid and accurate detec-
of all sizes, including bicycles and motorcycles, are accurately detected.
tion and ranging in the entire field of view without any moving parts.
The large field of view and diffused light pulses of the LeddarTM sensor,
processed through innovative algorithms, allow detection of a wide
250 feet out
range of objects under various environmental conditions.
With the 2nd generation, the d-tec traffic sensor is engineered to answer
all traffic management needs. The d-tec Long Range offers detection up
Main Features
to 250 feet thus allowing traffic managers to provide advanced detection
- LED-based sensing technology
for dilemma zone requirements. LeddarTM d-tec meets your short, mid
and long-range needs with reliable and robust performance!
- Integrated video sensor
- Fully IP addressable
- Detection of all types of vehicles, including bicycles
- Single Cat 5e Ethernet cable - Power over Ethernet (PoE)
Low installation cost and time savings
Since the d-tec traffic sensor is designed to be seamlessly integrated with
current traffic infrastructure, it only takes 2-4 hours to install a complete
intersection and as little as 15 minutes to configure. It results in lower
installation cost, time savings and peace of mind obtained from its
optimal performance that exceeds traffic management’s requirements.
- Counting, speed measurement and recording
Benefits for Traffic Managers
- Reliable in any environmental conditions
- Fastest installation directly to current infrastructure
- Quick and easy configuration
- Provides MPEG-4 video back to your TOC
- IP addressable with remote access configuration and monitoring
- Scalable solution for all your ITS needs
EXPERIENCE THE DIFFERENCE LEDDARTM TECHNOLOGY MAKES
D
E
EC G
-T AN
R
G
N
LO
LED-BASED STOP BAR DETECTION
OF ALL VEHICLE TYPES IN ANY
ENVIRONMENTAL CONDITIONS
LeddarTM
Sensor
Product models
Leddar™ d-tec | Long range Leddar™ d-tec | Narrow angle
Detection Technology
Ingress protection
IP67
Leddar™ d-tec | Medium angle (PN 75A0014)
Leddar™ d-tec | Wide angle
(PN 75A0003)
Mounting
Compatible with standard traffic hardware
Recommended mounting height: 17 to 21 feet
LEDDAR TM
(Light Emitting Diode Detection and Ranging)
Regulatory
FCC Part 15, Subpart B, Class A
ICES-003, Class A
IEEE 802.3at, 48 to 56 VDC, 30W minimum
Connection (PN 75A0018)
(PN 75A0002)
Power Consumption 15W without heater
30W with heater
Dimensions 8.9 x 10.2 x 15.2 in (226 x 259 x 386 mm)
Weight
6.6 lb (3 kg)
Enclosure Rugged design for full protection against
dust and elements
Temperature
- 29° F to + 140° F (- 34° C to + 60° C)
Performance LeddarTM
Product Models Accessory Power
Supply Controller Interface Cards
Ethernet Cat 5e RJ45 Plug Kit:
• Shielded Cat 5e RJ45 plug
• Bayonet-locking coupling/protective connector
• Maximum cable length of 335 ft (100m)
• Longer connection available using PoE repeater
Multilane stop bar detection: 16 outputs per d-tec.
Accurate detection in all weather conditions, any time of day.
Recommended maximum stop bar distance:
Long range:
250 ft (75m)
Narrow angle: 180 ft (55m)
Medium angle: 130 ft (40m)
Wide angle:
100 ft (30m)
4-Channel Full-Width (PN 75A0004)
4-Channel Half-Width (PN 75A0006)
2-Channel (PN 75A0005)
Input: 88-264 VAC, 47-63 Hz
Output: 42-56 VDC
0.8A, 1 sensor (PN 75A0007)
3.3A, 4 sensor (PN 75A0010)
4-Channel Half-Width
2-Channel
4-Channel Full-Width
EXPERIENCE THE DIFFERENCE LEDDAR™ TECHNOLOGY MAKES
LeddarTM is a registered trademark of LeddarTech Inc. This LeddarTech product is covered by one or more of the following U.S. patents: 7855376, 8242476, 8310655, 8436748, or international equivalents. Other patents pending.
T: 1 418 653-9000 or 1 855 865-9900
F: 1 418 653-9099
Creator of LeddarTM technology
www.leddartech.com
The content of this datasheet is subject to change without notice
54A0006-11 - - 052013 - Printed in Canada - Copyright Leddartech Inc. © 2013 All rights reserved.
Power Supply