the specification sheet

MULTI-ELEMENT INDUSTRIAL SENSOR
High-performance, cost-effective,
detection and ranging for any environment
Specially designed for the industrial market, the Leddar® IS16 Multi-Element Industrial Sensor is optimized for 0 to 50
meter (165 ft.) detection and ranging applications, providing both distance and angular positioning while performing
fast, continuous and accurate analysis of the area.
The 45-degree beam, produced by diffused light pulses and processed through innovative algorithms, enables this
unique sensor to DETECT, LOCATE and MEASURE a wide range of objects (solid or liquid) under various environmental
conditions.
Features
• 16 independent segments with simultaneous
acquisition and lateral discrimination capabilities
• 45-degree beam, for optimized field of view
• 0 to 50 meter detection range (165 ft.) • Rapid data acquisition time up to 50 Hz • LCD display for configuring and monitoring ongoing
operations
Benefits
• Proven reliability, even in harsh conditions
• Immune to ambient light
• IP67 weather-resistant enclosure
• No moving parts, for ultimate robustness
• Low power consumption
• Best cost/performance ratio
The IS16’s software includes Presence Detection Mode,
where the PNP/NPN outputs can be set according to
whether or not there are objects within the configured
detection zones (two zones, one per output). With the Teach Configuration feature, the sensor can define
the perimeter of its surroundings as a detection zone. In
Quick Mode, a near limit and a far limit can be easily
configured to quickly define zones. Alternatively, zones can
also be configured manually in Advanced Mode where near
and far limits can be set for each segment and unwanted
segments can be deactivated.
Raw Measurements Mode
Presence Detection Mode
Raw Measurements Mode
A custom zone can be defined and
unneeded segments may be disabled
Presence Detection Mode
The IS16 also provides the capabilities to acquire and log
all measurements from all segments in real time through
the RS-485 link. Each measurement provides the distance
of the detected object, the index of the segment it was detected in, and the intensity of the measurement (indication
of how much light was reflected of the object and captured
by the sensor).
System performance
Features
Beam options
Discrete output
Analog output
Interfaces
Wavelength
Power supply
Dimensions
Weight
Connector
Human/machine
interface
Detection range
0 to 50 meters (165 ft.) 1
2 x PNP/NPN
Accuracy 5 cm
4-20 mA 3, 0-10 V 3
Data refresh rate
up to 50 Hz
Operating temperature range
-40°C to +50°C
Meets IEC 62471: 2006 criteria
Exempt lamp classification
45o
2
USB, RS-485
940 nm
12 to 30 VDC
136 mm x 86 mm x 70 mm
430 g
Acquisition 16 segments simultaneously
M12
Optional control panel with LCD and 4 buttons
2
Contact LeddarTech for other optics options available upon request.
3
Provision for future use.
Distance precision 6 mm
Distance resolution
10 mm
Ingress protection
IP67
Power consumption
5.6 W
1
Varies according to target.
Segmentation of a 45o beam
7.5°
Amplitude vs. Distance
2.8°
Width
Ordering information
LED - S - XX - XX
Amplitude vs. Distance
103
Amplitude (count)
Interfaces
10 = USB, RS-485
20 = USB, RS-485, 4-20mA, 0-10 V,
Kodak Grey Card 90%, 20 x 25 cm
Kodak Grey Card 18%, 20 x 25 cm
Reflective Tape 5 x 10 cm
Lastolite Target 90% reflectivity, 75 x 75 cm
102
NPN/ PNP, LCD, buttons, indicators
10
1
Beam selection
45o
100
10-1
0
Included with the Leddar IS16:
5
10
15
20
25
Distance (m)
30
35
40
45
50
- Leddar Configuration Software CD
The chart below displays the detection amplitude of a 45o sensor for five reference objects
(photography grey cards and reflective tape) of varying size and reflectivity.
www.leddartech.com
The content of this datasheet is subject to change without notice
LeddarTM is a registered trademark of LeddarTech Inc. LeddarTM Technology is covered by one or more of the following U.S. patents: 7635854, 7640122, 7855376, 7895007, 7917320, 8159660, 8242476, or international equivalents. Other patents pending.
54A0015-6- 062015 - Printed in Canada - Copyright LeddarTech Inc. © 2015 All rights reserved.
Height