The Leddar Sensor Evaluation Kit is designed to let you test the power of Leddar in your application, before you commit to mass deployment. Leddar sensor modules can be easily integrated into almost any system. Their compact size, low weight, ease of integration, low power consumption, and high reliability enables developers and integrators to add advanced sensing capabilities with unmatched flexibility. Leddar sensors provide continuous, rapid and accurate detection and ranging — including lateral discrimination — in the entire wide beam, without any moving parts. After a successful trial validating the benefits of our cutting-edge technology, you can choose the module that’s right for you and adapt it to suit the specific requirements of your application. Features Receiver Assembly • 16 independent segments with simultaneous acquisition and lateral discrimination capabilities • 45o beam • 0 to 50 m detection range (165 ft.) • Highly adaptable: various form factors, ranges and beams available The Leddar receiver includes 16 independent segments with simultaneous acquisition capabilities. Several beam options are available, ranging from 9° to 95° (see back page). The beam width and height depend on the selected beam option. Source and Control Assembly • • Proven reliability, even in harsh conditions • Immune to ambient light • No moving parts, for ultimate robustness • Easy to integrate, includes Leddar Enabler SDK • Low power consumption • Best cost/performance ratio Benefits The Leddar source and control assembly includes IR LED emitters with a dominant wavelength of 940 nm and incorporates the processing and I/O for the targeted applications. The source and control assembly beam matches the receiver assembly. Software Development Kit The Leddar Enabler SDK provides a user-friendly application programminginterface (API) with .Net and C libraries and code examples. Sample code for RS-485/MODBUS for both Windows and Linux, as well as LabVIEW and MATLAB integration examples, are also provided. Amplitude vs. Distance 103 Kodak Grey Card 90%, 20 x 25 cm Kodak Grey Card 18%, 20 x 25 cm Reflective Tape 5 x 10 cm Lastolite Target 90% reflectivity, 75 x 75 cm Lastolite Target 18% reflectivity, 75 x 75 cm Amplitude (count) 102 Leddar Configurator Main Window 101 100 10-1 0 5 10 15 20 25 Distance (m) 30 35 40 45 50 Raw Detections Dialog Box Features System performance Beam 45o Interfaces USB, RS-485, CAN Wavelength 940 nm Power supply 12 or 24 VDC Dimensions 114 mm x 76 mm x 46 mm Weight 265 g Detection range Accuracy Data refresh rate Operating temperature range Meets IEC 62471: 2006 criteria Acquisition Distance precision Distance resolution Power consumption 1 Height and Width of 45o Beam Option 0 to 50 meters (165 ft.) 1 5 cm 1.5625 to 100 Hz -40oC to + 85oC Exempt lamp classification 16 segments simultaneously 6 mm 10 mm 4W Varies according to target. Ordering Information LED - EVAL - 45 - 10 7.5o Interfaces 10 = USB, RS-485, CAN Beam 45o 2.8° Included with the LeddarTM Evaluation Kit: - Power supply - Leddar Configurator CD - USB cable DIFFERENT LEDDAR SENSOR MODULES FOR DIFFERENT NEEDS M16 IS16 MULTI-ELEMENT MODULES Beam ( ) o Range (m) Wavelength (nm) Data refresh rate (Hz) Accuracy (cm) LeddarOne SINGLE-ELEMENT MODULE 9 18 24 36 45 95 45 3 100 80 70 60 50 20 50 40 940 940 850 Up to 100 Up to 50 Up to 70 5 5 5 Distance precision (mm) 6 6 5 Distance resolution (mm) 10 10 3 104 x 66 x 48 136 x 86 x 70 50.8 (diameter) 4 5.6 1.3 USB, RS-485, CAN, UART USB, RS-485 3.3 V UART or RS-485 NO YES NO Dimensions (mm) Power consumption (W) Interfaces IP67 weather-resistant enclosure www.leddartech.com LeddarTM is a registered trademark of LeddarTech Inc. LeddarTM technology is covered by one or more of the following U.S. patents: 7635854, 7640122, 7855376, 7895007, 7917320, 8159660, 8242476, 8310655, 8319949, or international equivalents. Other patents pending. The content of this datasheet is subject to change without notice. 54A0014-8- 062015 - Printed in Canada - Copyright LeddarTech Inc. © 2015 All rights reserved. - Receiver assembly - Source and control assembly - Mounting bracket