3.2x1.6mm SMD CHIP LED LAMP ATTENTION Part Number: APTD3216ZGC Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmX1.6mm SMT LED, 1.8mm thickness. The Green source color devices are made with InGaN z Low power consumption. on Sapphire Light Emitting Diode. z Ideal for backlight and indicator. Static electricity and surge damage the LEDS. z Various colors and lens types available. It is recommended to use a wrist band or anti-electrostatic z Package: 2000pcs / reel . glove when handling the LEDs. z Moisture sensitivity level : level 3. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF2947 REV NO: V.8B APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/04/2013 DRAWN: Y.Liu PAGE: 1 OF 5 ERP: 1203002332 Selection Guide Part No. Dice APTD3216ZGC Iv (mcd) [2] @ 20mA Lens Type Green (InGaN) Water Clear Viewing Angle [1] Min. Typ. 2θ1/2 1300 2300 35° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF2947 REV NO: V.8B APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/04/2013 DRAWN: Y.Liu PAGE: 2 OF 5 ERP: 1203002332 Green APTD3216ZGC SPEC NO: DSAF2947 REV NO: V.8B APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/04/2013 DRAWN: Y.Liu PAGE: 3 OF 5 ERP: 1203002332 APTD3216ZGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAF2947 REV NO: V.8B APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/04/2013 DRAWN: Y.Liu PAGE: 4 OF 5 ERP: 1203002332 PACKING & LABEL SPECIFICATIONS APTD3216ZGC All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAF2947 REV NO: V.8B APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/04/2013 DRAWN: Y.Liu PAGE: 5 OF 5 ERP: 1203002332