3.2x1.6mm SMD CHIP LED LAMP Part Number: APTR3216ZGC/G PRELIMINARY SPEC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED,1.05mm thickness. The Green source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Vavrious colors and lens types available. glove when handling the LEDs. z Package : 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ8685 REV NO: V.1 DATE: OCT/31/2009 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203010000 Selection Guide Part No. Dice APTR3216ZGC/G Lens Type Green (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 380 700 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 4 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ8685 REV NO: V.1 DATE: OCT/31/2009 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203010000 Green APTR3216ZGC/G SPEC NO: DSAJ8685 REV NO: V.1 DATE: OCT/31/2009 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203010000 APTR3216ZGC/G Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ8685 REV NO: V.1 DATE: OCT/31/2009 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203010000 PACKING & LABEL SPECIFICATIONS APTR3216ZGC/G SPEC NO: DSAJ8685 REV NO: V.1 DATE: OCT/31/2009 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203010000