4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040MGC Mega Green Features Description zSingle color. The Mega Green source color devices are made with Al- zSuitable for all SMT assembly and solder process. GaInP on GaAs substrate Light Emitting Diode. zAvailable on tape and reel. zIdeal for backlighting. zPackage : 500pcs / reel. zMoisture sensitivity level : level 4. zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1238 REV NO: V.9 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 1 OF 5 ERP: 1201004087 Selection Guide Part No. Dice AA4040MGC Lens Type Mega Green (AlGaInP) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 50 100 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Mega Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Mega Green 570 nm IF=20mA Spectral Line Half-width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Mega Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1238 REV NO: V.9 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 2 OF 5 ERP: 1201004087 Mega Green AA4040MGC SPEC NO: DSAD1238 REV NO: V.9 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 3 OF 5 ERP: 1201004087 AA4040MGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAD1238 REV NO: V.9 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 4 OF 5 ERP: 1201004087 PACKING & LABEL SPECIFICATIONS AA4040MGC SPEC NO: DSAD1238 REV NO: V.9 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 5 OF 5 ERP: 1201004087