3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528ACGCK Green Features Description z Single color. The Green source color devices are made with AlGaInP on z Suitable for all SMT assembly and solder process. GaAs substrate Light Emitting Diode. z Available on tape and reel. z Ideal for backlighting. z Package : 1500pcs / reel. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4232 REV NO: V.4 DATE: MAR/30/2009 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003996 Selection Guide Part No. Dice AA3528ACGCK Lens Type Green (AlGaInP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 18 60 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4232 REV NO: V.4 DATE: MAR/30/2009 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003996 Green AA3528ACGCK SPEC NO: DSAH4232 REV NO: V.4 DATE: MAR/30/2009 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003996 AA3528ACGCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH4232 REV NO: V.4 DATE: MAR/30/2009 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003996 PACKING & LABEL SPECIFICATIONS AA3528ACGCK SPEC NO: DSAH4232 REV NO: V.4 DATE: MAR/30/2009 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201003996