1.6X0.8mm SMD CHIP LED LAMP Part Number: AP1608MGC Mega Green Features Description z 1.6mmX0.8mm SMT LED, 1.1mm thickness. The Mega Green source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0922 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 1 OF 5 ERP: 1203000024 Selection Guide Part No. Dice AP1608MGC Lens Type Mega Green (AlGaInP) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 36 70 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Mega Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Mega Green 570 nm IF=20mA Spectral Line Half-width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Mega Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0922 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 2 OF 5 ERP: 1203000024 Mega Green AP1608MGC SPEC NO: DSAD0922 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 3 OF 5 ERP: 1203000024 AP1608MGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAD0922 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 4 OF 5 ERP: 1203000024 PACKING & LABEL SPECIFICATIONS AP1608MGC SPEC NO: DSAD0922 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 5 OF 5 ERP: 1203000024