LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL1630 THRU SRL1660 VOLTAGE RANGE 30 t o 60 Volts CURRENT 16.0 Ampere FEATURES • • • • • • • Schottky Barrier Chip Guard Ring Die Construction for Transient Protechion Low Power Loss, High efficiency High Surge Capability High Current capacity and Low Forward Voltage Drop For use in low voltage high frequency inverters, Free wheeling, and polarity protection applications Plastic Material has UL Flammability Classification 94V-0 TO-220AC Dimensions in inches and (millimeters) MECHANICAL DATA • • • • • • Case: D2-PAK molded plastic Terminals: Plated Lead solderable per MIL-STD-202 Method 208 Polarity: See Diagram Weight: 2.24 grams (approx) Mounting Position: Any Marking: Type Number MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRL SYMBOLS 1630 Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage 30 VRWM DC Blocking Voltage VR RMS Reverse Voltage VR(RMS) 21 Average Rectified Output Curent (Note 1)@Tc=95℃ Non-Repetitive Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Forward Voltage Drop @IF =16A,TC=25℃ Peak Reverse Current at Rated DC Blocking Voltage TC = 25℃ TC = 100℃ Typical Junction Capacitance(Note2) Typical Resistance Junction to case(Note1) Operating and Storage Temperature Range SRL 1635 SRL 1640 SRL 1645 SRL 1650 SRL 1660 UNIT 35 40 45 50 60 V 25 28 32 35 42 V IO 10.0 A IFSM 250 A VFM IRM Cj RθJC TJ TSTG Notes: 1. Thermal Resistance Junction to case mounted on heatsink 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC Web Site: www.hkmic.com 0.55 1.0 50 700 3.5 (-55 to +150) 0.65 V mA pF ℃/W ℃ LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL1630 THRU SRL1660 VOLTAGE RANGE 30 to 60 Volts CURRENT 16.0 Ampere 20 INSTANTANEOUS FORWARD CURRENT, ( A) FIG.1-FORWARD CURRENT DERATING CURVE 16 12 8 4 I( AV ) ,AVERAGE FORWARD CURRENT, ( A) RATINGE AND CHARACTERISTIC CURVES SRL1630 THRU SRL1660 0 0 50 100 TC ,CASE TMPERSTRUE( ℃ ) 150 SRL1630-SRL1645 10 Tj =25℃ 0.1 0.1 Pulse Width=300μs 2% duty cycle 0.3 0.5 0.7 0.9 VF,INSTANTANEOUS FORWARD VOLTAGE( V ) 4000 8.3ms Single Half Sine-Wave JEDEC Method FIG4 TYPICAL JUNCTION CAPACITANCE PER ELEMENT Tj =25℃ C j ,CAPACITANCE( pF) 250 200 150 100 1000 50 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 IR, INSTANTANOUS REVERSE CURRENT,( mA ) IFSM ,PEAK FORWARD SURGE CURRENT, ( A) SRL1650-SRL1660 1.0 FIG.3 MAX NON-REPETITIVE SURGE CURRENT 300 FIG.2-TYPICAL FORWARD CHARACTERISTICS 100 10 100 0.1 100 FIG.5-TYPICAL REVERSE CHARACTERISTICS Tj =100℃ Tj =75℃ 1.0 0.1 0.01 0 Tj =25℃ 40 80 120 PERCENT OF RATED REVERSE VOLTAGE,( % ) Web Site: www.hkmic.com 1.0 10 VR,REVERSE VOLTAGE( v) 100