R1200 THRU HIGH VOLTAGE SILICON RECTIFIER VOLTAGE RANGE 1200 to 5000 Volts R5000 CURRENT 0.2 - 0.5 Amperes FEATURES Low leakage High surge capability High current capability High temperature soldering guaranteed: 260/10 seconds. 0.375" (9.5mm) lead length at 5lbs. (2.3kg) tension. MECHANICAL DATA Case: Transfer molded plastic Epoxy: UL94V - 0 rate flame retardant Polarity: Color band denotes cathode end. Lead: Plated slug, solderable per MIL - STD 202 E method 208C Mounting position: Any Weight: 0.012 ounce, 0.33grams (DO-41) 0.014 ounce, 0.39 grams (DO-15) (R1200 - R2000) (R2500 - R5000) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) Lead length at TA = 50 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage Drop at 0.5A / 0.2A Maximum DC Reverse Current at rated TA = 25 DC blocking voltage T Maximum Full Load Reverse Current, full cycle average 0.375" (9.5mm) lead length at TL = 75 Operating and Storage Temperature Range SYMBOLS VRRM VRMS VDC R1200 1200 840 1200 R1500 I(AV) IR R2500 R3000 R4000 R5000 500 IFSM VF R1800 R2000 mA 30 UNIT Volts Volts Volts Amps Volts A IR(AV) TJ, TSTG (-65 to +150) Web Site: www.hkmic.com HIGH VOLTAGE SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES R1200 THRU R5000 FIG.2-MAXIMUM NON-REPETITIVE PEAK FIG.1-TYPICAL FORWARD CURRENT FORWARD SURGE CURRENT Single Phase Falf Wave 60 Hz Load 0.375"(9.5mm) Lead Length R 200 R 25 00 - 12 00 -R 20 R 50 00 00 30 8.3ms Single Half Sine-Wave =TT j j max (JEDEC Method) CURRENT, (A) PEAK FORWARD SURGE Resistive or Inductive 500 (mA) AVERAGE FORWARD CURRENT, DERTAING CURVE 10 1 Cycle 0 0 25 50 75 100 125 150 175 CHARACTERISTICS 10 (uA) 1.0 0.1 Tj =25 ° C 0.01 20 40 60 80 100 2 4 6 8 10 20 NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL REVERSE 0 0 1 AMBIENT TEMPERATURE, ( ° C) INSTANTANEOUS REVERSE CURRENT, 20 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) Web Site: www.hkmic.com 40 60 100