Cree MT-G2 Series on Board

Cree MT-G2 Series on Board
Cree MT-G2 Series
The first EasyWhite LED array built on the SC³ Technology Platform, Cree's XLamp
MT-G2 LED pushes performance limits to redefine lumen levels and efficacy while
delivering the industry’s best color consistency and superior optical control. The MTG2 LED delivers up to 1987 lumens in cool white and 1735 lumens in warm white,
both at 18.5 watts, 85°C.
FEATURES
> Cree EasyWhite color temp from 2700K to 5000K
> 85°C binning and characterization
> UL- recognized component (E349212)
> Electrically Neutral Thermal Path
FLUX CHARACTERISTICS @ 85°C
COLOR
Warm White
Neutral White
CHARACTERISTICS
Viewing angle (FWHM)
Effective Thermal Resistance, Junction to Solder Point
ESD classification (HBM per Mil-Std-883D)
LED junction temperature
DC forward current (6V)
DC forward current (9V)
DC forward current (36V)
Forward voltage (6V, 1000 mA, 85 °C)
Forward voltage (6V, 1000 mA, 25 °C)
Forward voltage (9V, 735 mA, 85 °C)
Forward voltage (9V, 735 mA, 25 °C)
Forward voltage (36V, 185 mA, 85 °C)
Forward voltage (36V, 185 mA, 25 °C)
Temperature coefficient of voltage (6V)
Temperature coefficient of voltage (9V)
Temperature coefficient of voltage (36V)
Reverse voltage
Reverse Current
APPLICATIONS
> Directional
> Downlight
CCT (TYP.) MIN.FLUX (LM) @350MA KIT USED
600
2700K
J027F
750
5000K
N050F
UNIT
degrees
°C/W
°C
mA
mA
mA
V
V
V
V
V
V
mV/°C
mV/°C
mV/°C
V
A
MINIMUM
TYPICAL
115
1.5
Class 2
MAXIMUM
150
3000
2000
500
5.7
7
8.55
10.5
34.2
42
-4
-6
-26
It is highly recommended for the user to review the CREE Series page for additional and most recent technical data at:
http://www.cree.com/led-components-and-modules/products/xlamp/arrays-directional/xlamp-mtg2-easywhite
Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com
TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: [email protected]
-5
0.1
Cree MT-G2 Series on Board
* Exceeding maximum ratings may damage the LED and cause potential safety hazards.
* Elevated operating temperatures can be expected to negatively impact the service life (lumen output)
* All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances
in the manufacturing process.
* End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions
installed.
Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant
change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are
within the
absolute maximum ratings.
Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 10°C/W so that
the LED is not exposed to a condition beyond the absolute maximum ratings.
Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally
constant status with a temperature sensor or a temperature sensitive label.
Hardware (not included)
> Mount with #4 Machine Screws.
> 16AWG Maximum Wire Gauge.
> Use only with constant current power supplies.
PCB Fabrication
> Layer Count: 1
> Core Material: 6061-T6 Aluminum
> Single Layer Copper Weight: 1oz
> Solder Mask: White
> Finishing Plating: Pb Free HASL
Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com
TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: [email protected]