Cree XM-L Color Series on Board Cree XM-L Color Series Cree XLamp XM-L color LEDs are the brightest and smallest multi-colored LEDs of their class, delivering red, green, royal-blue and white in one LED at twice the lumens-per-dollar of the MC-E color LED. The XM-L color LED is 60% smaller than the MC-E LED, reducing the distance between LED die to create a small optical source for excellent optical control, efficient color mixing and simplified design. FEATURES > Red, green, blue and white in a single 5 mm x 5 mm package > Maximum drive current per LED die: 1 A > Individually addressable LEDs > Electrically Neutral Thermal Path APPLICATIONS > Architectural > Entertainment > Vehicle FLUX CHARACTERISTICS @ 25°C COLOR Red Green Royal Blue Cool White Neutral White CHARACTERISTICS Viewing angle (FWHM) Thermal Resistance, Junction to Solder Point ESD classification (HBM per Mil-Std-883D) LED junction temperature Temperature coefficient of voltage - red Temperature coefficient of voltage - green Temperature coefficient of voltage - blue, white Reverse voltage - red, green, blue, white Reverse voltage - green Reverse voltage - blue, white DWL (nm) or CCT (TYP.) MIN.FLUX (LM) @350MA KIT USED 45.7 620-635 C3ABC02 87.4 520-535 13.9 (6000K) 450-465 80-100 C2ABCB1 5700-8000 80-100 (4000K) 3700-4300 UNIT degrees °C/W °C mV/°C mV/°C mV/°C V V V MINIMUM TYPICAL 130 3.5 Class 2 MAXIMUM 150 -1.8 -4 -3 2.25 3.3 3.1 It is highly recommended for the user to review the CREE Series page for additional and most recent technical data at: http://www.cree.com/led-components-and-modules/products/xlamp/arrays-directional/xlamp-xml-color Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: [email protected] 2.6 3.9 3.7 Cree XM-L Color Series on Board * Exceeding maximum ratings may damage the LED and cause potential safety hazards. * Elevated operating temperatures can be expected to negatively impact the service life (lumen output) * All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. * End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are within the absolute maximum ratings. Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 10°C/W so that the LED is not exposed to a condition beyond the absolute maximum ratings. Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. Hardware (not included) > Mount with #4 Machine Screws. > 16AWG Maximum Wire Gauge. > Use only with constant current power supplies. PCB Fabrication > Layer Count: 1 > Core Material: 6061-T6 Aluminum > Single Layer Copper Weight: 1oz > Solder Mask: White > Finishing Plating: Pb Free HASL Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: [email protected]