APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C Publication Number: AN-067 APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C Contents 1. Introduction......................................................................................................................................................... 2 2. General Features................................................................................................................................................ 3 2-1. Feature Comparison...................................................................................................................................... 3 Table 1: Major Feature Comparison of 4Mb Devices...................................................................................... 3 2-2: Performance Comparison.............................................................................................................................. 4 Table 2: Performance Comparison of 4Mb Devices........................................................................................ 4 3. Command Set Comparison............................................................................................................................... 5 Table 3: Commands for the MX25L4005A/MX25L4005C and MX25L4006E Devices.................................... 5 4. Device ID Code Comparison of 4Mb Devices.................................................................................................. 6 Table 4: ID Code Comparison......................................................................................................................... 6 5. References.......................................................................................................................................................... 6 REVISION HISTORY .............................................................................................................................................. 7 Publication Number: AN-067 1 REV. 1.0, JUL 8, 2010 APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C 1. Introduction This application note indicates the differences between MX25L4006E and MX25L4005A/MX25L4005C. In Single I/O mode, MX25L4006E is identical in forms and functions with the MX25L4005A & MX25L4005C. MX25L4006E is capable of Dual Output mode (Single Input / Dual Output) but no longer supports Dual Input / Dual Output mode. The comparison and features of new products are described as below. The information provided is based on the data available at the time. The MX25L4006E datasheet may override this application note if there is a difference description for the same in the datasheet. Publication Number: AN-067 2 REV. 1.0, JUL 8, 2010 APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C 2. General Features 2-1. Feature Comparison The Dual Output mode (1I/2O) is one of the new features of the MX25L4006E, and the most advanced technique is that this new product accepts wide range of clock rate from DC (Direct Current)~ 86MHz for frequency control from host system. Table 1: Major Feature Comparison of 4Mb Devices Feature Voltage Interface Package Operation Temperature Sector / Block Structure Fast Read Clock Rate*** Read DREAD (Dual Output) Byte Program Block Protection (NVM) HOLD# WP# MX25L4005A/ MX25L4005C 2.7~3.6 V x1 8-SOP(150mil/209mil) 8-WSON(6x5mm) 8-PDIP(300mil) 8-USON(4x4)** -40~85 °C 4KB / 64KB 1KHz~85MHz 1KHz~33MHz -NA BP2,BP1,BP0 Yes Yes MX25L4006E 2.7~3.6 V x1, 1I/2O* 8-SOP(150mil/209mil) 8-WSON(6x5mm) 8-PDIP(300mil) -40~85 °C 4KB / 64KB DC~86MHz DC~33MHz DC~80MHz Yes BP2,BP1,BP0 Yes Yes *Note: * MX25L4006E 1I/2O is Dual Output mode, means Single input - Dual output ** Only MX25L4005A has 8-USON *** 1KHz is minimum clock rate. DC = no minimum clock rate Publication Number: AN-067 3 REV. 1.0, JUL 8, 2010 APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C 2-2: Performance Comparison Table below is the comparison of new product and the former products. Table 2: Performance Comparison of 4Mb Devices tCH tCL Byte Program Time Page Sector(4KB) Erase Time Block(64KB) Chip tRES1 Read ID tRES2 Write Status Register tW MX25L4005A/ MX25L4005C 15ns(min.) 15ns(min.) NA 1.4ms(typ.) ; 5ms(max.) 60ms(typ.) 1s(typ.) ; 2s(max.) 3.5s (typ.); 7.5s(max.) 3us(max.) 1.8us(max.) 5ms(typ.); 15ms(max.) CS# Deselect Time Read/write=100ns(min.) Performance Clock High/ Low Time@33MHz tSHSL Active Setup Time tSLCH Not Active Setup Time tSHCH Active Hold Time tCHSH Not Active Hold Time tCHSL VCC Standby ISB1 tDP Deep Power Down ISB2 ICC1 ICC2 ICC3 Active Current ICC4 ICC5 Publication Number: AN-067 5ns(min.) 5ns(min.) 5ns(min.) 5ns(min.) 10uA(max.) 3us(max.) 10uA(max.) 12mA(max.) @85MHz 15mA 15mA 15mA 15mA 4 MX25L4006E 13ns(min.) 13ns(min.) 9us(typ.) ; 300us(max.) 1.4ms(typ.) ; 5ms(max.) 60ms(typ.) 0.7s(typ.) ; 2s(max.) 3.5s (typ.); 7.5s(max.) 8.8us(max.) 8.8us(max.) 10ms(typ.); 100ms(max.) Read=15ns(min.) ; Write=40ns(min.) 7ns(min.) 7ns(min.) 7ns(min.) 7ns(min.) 25uA(max.) 10us(max.) 10uA(max.) 12mA(max.) @86MHz 20mA 15mA 15mA 20mA REV. 1.0, JUL 8, 2010 APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C 3. Command Set Comparison The new product adds new command Double Output Mode Command (DREAD) for the new feature. Table 3: Commands for the MX25L4005A/MX25L4005C and MX25L4006E Devices Command Write Read Erase Program Deep Power Down Publication Number: AN-067 WREN WRDI WRSR RDID RDSR READ Fast Read DREAD RES REMS SE BE CE PP DP DRP MX25L4005A/ MX25L4005C 06h 04h 01h 9Fh 05h 03h 0Bh ABh 90h 20h 52h or D8h 60h or C7h 02h B9h ABh 5 MX25L4006E 06h 04h 01h 9Fh 05h 03h 0Bh 3Bh ABh 90h 20h 52h or D8h 60h or C7h 02h B9h ABh REV. 1.0, JUL 8, 2010 APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C 4. Device ID Code Comparison of 4Mb Devices This table shows that Manufacturer and Device IDs have not been changed. The density (13) is defined by MXIC and also has not been changed. Table 4: ID Code Comparison Command Type MX25L4005A MX25L4005C MX25L4006E Type Density M ID Type Density M ID Type Density 20 13 C2 20 13 C2 20 13 E ID E ID E ID RES Command 12 12 12 M ID Device ID M ID Device ID M ID Device ID REMS C2 12 C2 12 C2 12 RDID Command M ID C2 5. References The following datasheets were used for preparing this comparison note: Datasheet Location Date Issued Versions MX25L4005A Macronix Website Apr., 2009 2.0 MX25L4005C Macronix Website Jan., 2010 1.4 MX25L4006E Macronix Website May., 2010 0.01 For more functional and parametric specifications, please refer to the datasheet on the Macronix Website at http://www.macronix.com/ and go to: Products/Flash Memory/Serial Flash. Publication Number: AN-067 6 REV. 1.0, JUL 8, 2010 APPLICATION NOTE Migrating to MX25L4006E from MX25L4005A and MX25L4005C REVISION HISTORY Revision No. Description Page Date 1.0 1. Removed SFDP descriptions P2-3,5 JUL/8/2010 2. Emphasizes wide range of clock rate P3 Publication Number: AN-067 7 REV. 1.0, JUL 8, 2010 APPLICATION NOTE Macronix's products are not designed, manufactured, or intended for use for any high risk applications in which the failure of a single component could cause death, personal injury, severe physical damage, or other substantial harm to persons or property, such as life-support systems, high temperature automotive, medical, aircraft and military application. Macronix and its suppliers will not be liable to you and/or any third party for any claims, injuries or damages that may be incurred due to use of Macronix's products in the prohibited applications. Copyright© Macronix International Co., Ltd. 2010. All Rights Reserved. Macronix, MXIC, MXIC Logo, MX Logo, are trademarks or registered trademarks of Macronix International Co., Ltd. The names and brands of other companies are for identification purposes only and may be claimed as the property of the respective companies. For the contact and order information, please visit Macronix’s Web site at: http://www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice. 8