8 7 6 5 220.79 mm [8.692 in] 200.79 mm [7.905 in] 47.00 mm [1.850 in] A D 4.60 mm [0.181 in] 19.60 mm [0.772 in] 148.89 mm [5.862 in] (Inlay Length) B B 113.78 mm [4.480 in] (Inlay Width) 8.50 mm [0.335 in] 5.00 mm X4 [0.197 in] C 4 120.79 mm [4.755 in] 70.75 mm [2.785 in] 6.00 mm [0.236 in] 2 1 15.00 mm [0.591 in] D 2.00 mm [0.079 in] (Inlay Depth) 42.50 mm [1.673 in] (Inner Box Depth) A ENCLOSURE ASSEMBLY TOP VIEW 3 12.00 mm [0.472 in] (Inner Lid Depth) SECTION A-A END VIEW OF ASSEMBLY 6.50 mm [0.256 in] C Polycarbonate Version Only File #E65324 NEMA 4, 4X 62.50 mm [2.461 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] 174.00 mm [6.850 in] [0.089 in 0.236 in 6X ] 7 152.00 mm [5.984 in] [0.089 in 0.295 in X4] 111.00 mm [4.370 in] 72.00 mm [2.835 in] 160.00 mm [6.299 in] 2.25 mm 7.50 mm X4 6 Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 132.00 mm TYP. [5.197 in] 5 B 1555HF 1555HF Regular Enclosure General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 1555HF42GY 1555H2F42GY ACCESSORIES Steel Inner Panels Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1598ATS100 1555HFPL SC1554 A 171.00 mm [6.732 in] 1555HF42 FLANGED LID INSIDE VIEW BOX INSIDE VIEW 8 NOTE Purchased assembly includes styled box, flanged lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) 2.25 mm 6.00 mm 6X [0.276 in] 84.00 mm [3.307 in] 114.00 mm [4.488 in] 75.00 mm [2.953 in] 155.00 mm [6.102 in] A 7.00 mm 180.0 mm [7.086 in] 107.00 mm [4.213 in] 167.00 mm [6.575 in] B 3.50 mm THRU 4X [0.138 in THRU 4X ] SECTION B-B (SIDE VIEW OF ASSEMBLY) 119.97 mm [4.723 in] 6.00 mm [0.236 in] 4 3 2 1