8 7 6 5 120.00 mm [4.724 in] 4 3 2 1 80.50 mm [3.169 in] A D D 90.00 mm [3.543 in] B B 83.76 mm [3.298 in] SECTION A-A A 87.10 mm [3.429 in] 2.50 mm [0.098 in] C 3.73 mm 4X ASSEMBLY [0.147 in] 77.00 mm [3.031 in] 2.50 mm [0.098 in] R8.33 mm 4X [0.328 in] C Polycarbonate Version Only 38.71 mm [1.524 in] 66.87 mm [2.633 in] 74.50 mm [2.933 in] (ORDERED SEPARATELY) 68.00 mm [2.677 in] 77.47 mm [3.050 in] File #E65324 NEMA 4, 4X 6.00 mm [0.236 in] 2.79 mm 2X Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] [0.110 in] 91.74 mm [3.612 in] SECTION B-B 107.00 mm [4.213 in] 100.00 mm [3.937 in] B NOTE 100.00 mm [3.937 in] Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) STEEL INNER PANEL 3.90 mm 4X [0.153 in] (MOUNTING HOLES) Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 112.00 mm [4.409 in] 1555G 3.00 mm 4X [0.118 in] 1555G Regular Enclosure R6.00 mm 4X [0.236 in] 57.00 mm 45.00 mm [2.244 in] [1.772 in] 77.00 mm [3.031 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 68.00 mm 79.16 mm [2.677 in] [3.116 in] R7.50 mm 4X [0.295 in] 68.00 mm [2.677 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 79.50 mm [3.130 in] 77.00 mm [3.031 in] 95.00 mm [3.740 in] 24.00 mm [0.945 in] 7 1598ATS100 SC1554 A 92.00 mm [3.622 in] 1555G LID - INSIDE BOX - INSIDE 8 1554FPL 1591MM100 M4 STAINLESS STEEL INSERTS 114.00 mm [4.488 in] A 1555GGY 1555G2GY ACCESSORIES 42.00 mm [1.654 in] M3 BRASS INSERTS 4X B 6 5 4 3 2 1