8 7 6 5 160.00 mm [6.299 in] 4 3 2 1 60.50 mm [2.382 in] A D D 153.77 mm [6.054 in] B B 160.00 mm [6.299 in] 150.95 mm [5.943 in] 128.83 mm [5.072 in] C 2.50 mm [0.098 in] C 140.00 mm 108.03 mm [5.512 in] [4.253 in] 2.50 mm [0.098 in] (ORDERED SEPARATELY) 96.04 mm 147.40 mm [3.781 in] [5.803 in] Polycarbonate Version Only 46.37 mm [1.826 in] 54.00 mm [2.126 in] 6.00 mm [0.236 in] R9.53 mm 4X [0.375 in] SECTION A-A A ASSEMBLY File #E65324 NEMA 4, 4X 3.73 mm 4X SECTION B-B 131.90 mm [5.193 in] [0.147 in] 2.79 mm 4X [0.110 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] 138.00 mm [5.433 in] 151.46 mm [5.963 in] 127.00 mm [5.000 in] B 3.90 mm 4X NOTE Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) STEEL INNER PANEL [0.153 in] (MOUNTING HOLES) 151.00 mm [5.945 in] 3.00 mm 10X 96.00 mm [3.780 in] [0.118 in] Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) B 1555R 1555R Regular Enclosure General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 R7.50 mm 4X [0.295 in] 1555RGY 1555R2GY ACCESSORIES 147.00 mm 138.00 mm [5.787 in] [5.433 in] 140.00 mm [5.512 in] 135.00 mm 154.00 mm [5.315 in] [6.063 in] 132.00 mm [5.197 in] 138.00 mm [5.433 in] 96.00 mm [3.780 in] A 140.00 mm [5.512 in] M3 BRASS INSERTS 4X 115.00 mm [4.528 in] M4 STAINLESS STEEL INSERTS 7 112.00 mm [4.409 in] 1598ATS100 SC1554 1555R LID - INSIDE 6 1554RPL 1591MM100 A 24.00 mm [0.945 in] BOX - INSIDE 8 Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 120.00 mm 149.70 mm [4.724 in] [5.894 in] 5 4 3 2 1