8 7 6 5 180.00 mm [7.087 in] 4 3 2 1 60.50 mm [2.382 in] A D D 113.77 mm [4.479 in] B B 120.00 mm [4.724 in] SECTION A-A A 148.83 mm [5.859 in] ASSEMBLY C 2.50 mm [0.098 in] 167.13 mm [6.580 in] 160.00 mm [6.299 in] 132.00 mm [5.197 in] 2.79 mm 2X [0.110 in] C 2.50 mm [0.098 in] Polycarbonate Version Only (ORDERED SEPARATELY) 67.92 mm [2.674 in] 46.87 mm [1.845 in] 54.50 mm 6.00 mm [2.146 in] [0.236 in] SECTION B-B R8.33 mm [0.328 in] 174.00 mm [6.850 in] B 3.73 mm 4X [0.147 in] 150.47 mm [5.924 in] File #E65324 NEMA 4, 4X Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] NOTE Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) STEEL INNER PANEL 160.00 mm [6.299 in] M3 BRASS INSERTS 4X 84.00 mm 106.68 mm [3.307 in] [4.200 in] 171.00 mm [6.732 in] 3.00 mm 10X Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) [0.118 in] B 1555H 1555H Regular Enclosure R6.00 mm 4X [0.236 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 R7.50 mm 4X [0.295 in] 1555HGY 1555H2GY ACCESSORIES 87.00 mm 75.00 mm [3.425 in] [2.953 in] 132.00 mm [5.197 in] 3.90 mm 4X A 84.00 mm [3.307 in] 72.00 mm [2.835 in] 4.00 mm 2X 24.00 mm [0.945 in] [0.157 in] 167.00 mm [6.575 in] M4 STAINLESS STEEL INSERTS 7 56.00 mm 109.50 mm [2.205 in] [4.311 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 6 5 1554HPL 1591MM100 1598ATS100 SC1554 152.00 mm [5.984 in] 158.00 mm [6.220 in] A 1555H LID - INSIDE BOX - INSIDE 8 91.50 mm [3.602 in] 131.75 mm [5.187 in] 155.00 mm [6.102 in] [0.153 in] (MOUNTING HOLES) 108.91 mm [4.288 in] 4 3 2 1