8 7 6 5 4 3 2 1 220.79 mm [8.692 in] 200.79 mm [7.905 in] D 4.60 mm [0.181 in] 19.60 mm [0.772 in] 148.89 mm [5.862 in] (Inlay Length) 2.00 mm [0.079 in] (Inlay Depth) B B 70.75 mm [2.785 in] 113.78 mm [4.480 in] (Inlay Width) 8.50 mm [0.335 in] C 120.79 mm [4.755 in] D 15.00 mm [0.591 in] 22.20 mm [0.874 in] A 17.20 mm [0.677 in] (Inner Box Depth) 12.50 mm [0.492 in] (Inner Lid Depth) 5.00 mm X4 [0.197 in] 6.00 mm [0.236 in] C A ENCLOSURE ASSEMBLY TOP VIEW SECTION A-A END VIEW OF ASSEMBLY 6.50 mm [0.256 in] 6.00 mm [0.236 in] File #E65324 NEMA 4, 4X 37.70 mm [1.484 in] SECTION B-B (SIDE VIEW OF ASSEMBLY) Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] NOTE 2.25 mm 6.00 mm 6X [0.089 in 0.236 in 6X ] 180.0 mm [7.086 in] 7.00 mm [0.276 in] 167.00 mm [6.575 in] B Polycarbonate Version Only 3.50 mm THRU X4 [0.138 in THRU X4] 132.00 mm TYP. [5.197 in] Purchased assembly includes styled box, flanged lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) B 1555HF 1555HF Regular Enclosure 114.00 mm [4.488 in] 120.0 mm [4.723 in] 75.00 mm [2.953 in] 107.00 mm [4.213 in] 155.00 mm [6.102 in] A 174.00 mm [6.850 in] 72.00 mm [2.835 in] 84.00 mm TYP. [3.307 in] 7 General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 [0.089 in 0.295 in 4X] 5 1555HFPL 1598ATS100 SC1554 A 1555HF17 FLANGED LID INSIDE VIEW 6 1555HF17GY 1555H2F17GY ACCESSORIES Steel Inner Panels Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 152.00 mm [5.984 in] 171.00 mm [6.732 in] 2.25 mm 7.50 mm 4X BOX INSIDE VIEW 8 111.00 mm [4.370 in] 160.00 mm [6.299 in] 4 3 2 1