www.hammondmfg.com 1487 Series Pull Through Wireway - NEMA 12 Wireway & Trough Application Construction Finish • Designed to enclose and protect electrical wiring from dirt, dust, oil and water. • Ideal for connecting machines to control panels or power sources. • Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges. • Smooth continuously welded seams. • Interior surfaces are smooth to prevent wire damage during installation. • Butt hinged covers are secured with easily operated screw clamps. • Oil resistant gaskets are permanently secured. • Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together. • One gasket kit, complete with hardware is provided with each straight section or fitting. • Sections and fittings are finished in ANSI 61 gray. Standards Pull Through Wireway • UL 870 Type 1 (unless marked1) • CSA Type 1 (unless marked1) • Complies with • NEMA Type 12 • JIC EMP-1-1967 • JIC EGP-1-1967 • IEC 60529, IP54 Technical references and CAD downloads available at www.hammondmfg.com 283 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1487 Series Pull Through Wireway - NEMA 12 4x4 Part No. 1487C12 1487C24 1487C36 1487C48 1487C60 1487C120 1487CB601 1487CM1 1487CM2 1487CM3 1487CM6 1487CV1 1487CV2 1485CFF1 1487CX1 1487CW1 1487C9P 1487C4P 1487C2P 1487CT 1487CY 6x6 Part No. 1487D12 1487D24 1487D36 1487D48 1487D60 1487D120 1487DB601 1487DM1 1487DM2 1487DM3 1487DM6 1487DV1 1487DV2 1485DFF1 1487DX1 1487DW1 1487D9P 1487D4P 1487D2P 1487DT 1487DY 8x8 Part No. 1487E12 1487E24 1487E36 1487E48 1487E60 1487E120 1487EB601 1487EM1 1487EM2 1487EM3 1487EM6 1487EV1 1487EV2 1485EFF1 1487EX1 1487EW1 1487E9P 1487E4P 1487E2P 1487ET 1487EY — — — — 1487CRC2 — — — — 1487DRC2 — — — — 1487ERCC2 1487ERCD2 — — — — 1487BK1 1485BL11 1485BL21 1487BH2 1487BS1 1487CRE2 — — — 1487CK1 1485CL11 1485CL21 1487CH2 1487CS1 — 1487DRE2 — — 1487DK1 1485DL11 1485DL21 1487DH2 1487DS1 — — 1487EREC2 1487ERED2 1487EK1 1485EL11 1485EL21 1487EH2 1487ES1 1 Does not meet CSA or UL requirements 2 Maintains ratings on CSA and UL approved wireway Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Pull Through Wireway 12" Section 24" Section 36" Section 48" Section 60" Section 120" Section 60" Long Partition (Barrier) 1" Nipple 2" Nipple 3" Nipple 6" Nipple Box Entry Swivel Nipple Standard Swivel Nipple Flexible Fitting Adjustable Fitting Cut-Off Fitting 90° Elbow 45° Elbow 22.5° Elbow Tee Fitting Cross Fitting Center Hole Reducers Reducer - 4 x 4 to 2.5 x 2.5 Reducer - 6 x 6 to 4 x 4 Reducer - 8 x 8 to 4 x 4 Reducer - 8 x 8 to 6 x 6 Edge Hole Reducers Reducer 4 x 4 to 2.5 x 2.5 Reducer 6 x 6 to 4 x 4 Reducer 8 x 8 to 4 x 4 Reducer 8 x 8 to 6 x 6 Box Connector Drop Hanger Bracket Hanger Cover Plate Gasket & Screws 2.5 x 2.5 Part No. 1487B12 1487B24 1487B36 1487B48 1487B60 1487B120 — 1487BM1 1487BM2 1487BM3 1487BM6 1487BV1 1487BV2 1485BFF1 1487BX1 1487BW1 1487B9P 1487B4P 1487B2P 1487BT 1487BY Wireway & Trough Description USA: 716.630.7030 Data Subject to change without notice 284 www.hammondmfg.com 1487 Series Pull Through Wireway - NEMA 12 Typical Straight Section C=12" C=24" C=36" Section Section Section Part No. Part No. Part No. 1487B12 1487B24 1487B36 1487C12 1487C24 1487C36 1487D12 1487D24 1487D36 1487E12 1487E24 1487E36 One flat sealing plate included C=48" Section Part No. 1487B48 1487C48 1487D48 1487E48 C=60" Section Part No. 1487B60 1487C60 1487D60 1487E60 C=120" Section Part No. 1487B120 1487C120 1487D120 1487E120 Size 2.5 x 2.5 4x4 6x6 8x8 Wireway & Trough Partition (Barrier) Kit • Divides wireway into two or more compartments. Barriers are fastened to wireway sections with screws. Part No. Size X 1487CB60 4x4 3.72 1487DB60 6x6 5.72 1487EB60 8x8 7.72 Does not meet CSA or UL requirements Typical Nipple Pull Through Wireway 1" Nipple 2" Nipple Part No. Part No. 1487BM1 1487BM2 1487CM1 1487CM2 1487DM1 1487DM2 1487EM1 1487EM2 One flat sealing plate included 6" Nipple Part No. 1487BM6 1487CM6 1487DM6 1487EM6 Size 2.5 x 2.5 4x4 6x6 8x8 Box Entry or Standard Swivel Nipple Box Entry Swivel Nipple Part No. 1487BV11 1487CV11 1487DV11 1487EV11 Standard Swivel Nipple Part No. 1487BV22 1487CV22 1487DV22 1487EV22 Technical references and CAD downloads available at www.hammondmfg.com 285 3" Nipple Part No. 1487BM3 1487CM3 1487DM3 1487EM3 Size 2.5 x 2.5 4x4 6x6 8x8 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1487 Series Pull Through Wireway - NEMA 12 3" to 10" Cut-Off Fitting (Lay-In) • Allows on site length adjustment of 1.5" to 13.5" • Body comes in two pieces. Cut-off one piece, shorten cover, and weld together. • Includes angle sealing plate. Part No. 1485BFF 1485CFF 1485DFF 1485EFF Part No. Size 1487BX 2.5 x 2.5 1487CX 4x4 1487DX 6x6 1487EX 8x8 Does not meet CSA or UL requirements Part No. Size 1487BW 2.5 x 2.5 1487CW 4x4 1487DW 6x6 1487EW 8x8 Does not meet CSA or UL requirements 45° Elbow 22.5° Elbow A 2.5 4 6 8 B 2.5 4 6 8 90° Elbow Part No. 1487B9P 1487C9P 1487D9P 1487E9P Size 2.5 x 2.5 4x4 6x6 8x8 J 4.25 5.00 6.00 7.00 Part No. 1487B4P 1487C4P 1487D4P 1487E4P Size 2.5 x 2.5 4x4 6x6 8x8 Technical references and CAD downloads available at www.hammondmfg.com K 1.98 2.42 3.00 3.62 Part No. 1487B2P 1487C2P 1487D2P 1487E2P Size 2.5 x 2.5 4x4 6x6 8x8 Pull Through Wireway Adjustable Fitting • Allows for easy alignment of sections or fittings • Metal flanges • Flexible synthetic "bellows" middle section V 3.18 3.75 4.43 5.12 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Wireway & Trough Flexible Fitting USA: 716.630.7030 Data Subject to change without notice 286 www.hammondmfg.com 1487 Series Pull Through Wireway - NEMA 12 Wireway & Trough Tee Fitting Part No. 1487BT 1487CT 1487DT 1487ET Size 2.5 x 2.5 4x4 6x6 8x8 Box Connector H 8.50 10.00 12.00 14.00 M 4.25 5.00 6.00 7.00 Pull Through Wireway Size 2.5 x 2.5 4x4 6x6 8x8 Size 2.5 x 2.5 4x4 6x6 8x8 E 3.87 5.37 7.62 9.62 Part No. Size 1485BL1 2.5 x 2.5 1485CL1 4x4 1485DL1 6x6 1485EL1 8x8 H 8.50 10.00 12.00 14.00 M 4.25 5.00 6.00 7.00 Part No. 1487BH 1487CH 1487DH 1487EH Size 2.5 x 2.5 4x4 6x6 8x8 T 9.25 11.75 15.25 20.56 U 4.50 6.00 8.12 12.12 Bracket Hanger E 3.87 5.37 7.62 9.62 Technical references and CAD downloads available at www.hammondmfg.com 287 G 3.87 5.37 7.62 9.62 Cover Plate Cross Fitting Part No. 1487BY 1487CY 1487DY 1487EY Part No. 1487BK 1487CK 1487DK 1487EK Drop Hanger G 3.87 5.37 7.62 9.62 Part No. 1485BL2 1485CL2 1485DL2 1485EL2 Size 2.5 x 2.5 4x4 6x6 8x8 R 4.62 6.12 8.25 10.25 W 4.37 5.87 7.87 9.87 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1487 Series Pull Through Wireway - NEMA 12 Reducers (Center Hole) Part No. 1487CRC 1487DRC 1487ERCC 1487ERCD Reduces from 4x4 6x6 8x8 8x8 E 5.37 7.62 9.62 9.62 G 5.37 7.62 9.62 9.62 to 2.5 x 2.5 4x4 4x4 6x6 E 5.37 7.62 9.62 9.62 G 5.37 7.62 9.62 9.62 Reducers (Edge Hole) Part No. 1487CRE 1487DRE 1487EREC 1487ERED Reduces from 4x4 6x6 8x8 8x8 Wireway & Trough to 2.5 x 2.5 4x4 4x4 6x6 Pull Through Wireway Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 288