www.hammondmfg.com General Accessories General Accessories Drip Shield Kit • Easily installed on Type 12, 4 and 4X wall-mount enclosures using stainless steel bolts and sealing washers (included). • Designed not to interfere with door clamps. • Protects door from dripping water and settling dust. • Constructed in 14 gauge mild steel (painted) or 316 stainless steel • Maintains enclosure rating General Accessories Painted Steel (Gray) Part Number DK12GY DK16GY DK20GY DK24GY DK30GY DK36GY DK42GY DK48GY DK60GY DK72GY Painted Steel (Lt. Gray) Part Number DK12LG DK16LG DK20LG DK24LG DK30LG DK36LG DK42LG DK48LG DK60LG - Stainless Steel Part Number DK12S16 DK16S16 DK20S16 DK24S16 DK30S16 DK36S16 - Fits Enclosure Width (inches) 12.00 16.00 20.00 24.00 30.00 36.00 42.00 48.00 60.00 72.00 Installed Ground Wire Kits • Stranded #10 gauge copper wire with ring terminal .256 dia hole • Includes mouting nuts both 1/4 20 and 10-32 ground studs • Ground symbols (2 for each jumper) Part No. GRDKIT01 GRDKIT02 Description Quantity 2 Quantity 6 Door Support Guide • Designed for use when heavy loads or uneven mounting surfaces changes door alignment • Field installable kit • Can be used on Hammond Eclipse and 1418 Series wall mount enclosures, all freestanding and floor mount enclosures - both painted and stainless steel • Kit includes all necessary hardware and installation instructions • Sealing washers included maintain enclosure integrity Part No. DSG1 Technical references and CAD downloads available at www.hammondmfg.com 451 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com General Accessories Light Kits Fluorescent Light Kit & Accessories • • • • • Magnet mount not included - must be ordered separately. Part No. FLK18T81 FLK24T81 FLK48T81 FLK18MM FLK48MM 1 Description 18" Fluorescent Light Kit 24" Fluorescent Light Kit 48" Fluorescent Light Kit Magnet mount for 18" and 24" kit Magnet mount for 48" light kit T8 fluorescent bulb not included LED light kits • Available in 9”,17.5”,26”,34.5” and 38.5” lengths • Operating voltage 100/240V AC 50/60Hz Operating temperature -20 C to + 50 C • Long lamp life 60,000 hours in warm white color temperature • No remote power supplies as unit comes with its own integral LED drivers • Hard wired via multiple knockouts in light weight extruded Aluminum frame finished white with manual operated switch • Hinged glass diffuser allows easy access to replaceable LED module • Remote door switch available separately for automatic activation Part No. FLK5LED FLK7LED FLK10LED FLK15LED FLK17LED Description 9" LED Light Kit 17.5" LED Light Kit 26" LED Light Kit 34.5" LED Light Kit 38.5 LED Light Kit Number LED Modules 1.00 2.00 3.00 4.00 5.00 General Accessories • • • • Light kits are offered in 18", 24" and 48" widths. CSA and UL component recognized. Operating voltage 115 AC 60Hz Features a manually operated switch, 115V convenience outlet, durable plastic lens, and 6 foot power cord (without plug). Can mount into light mounting channel, bolt through enclosure or by using magnet strip (available separately - see chart below.) Magnet mount can be used with mild steel enclosures only. Remote door switch available separately for automatic activation. Finished in white. Use standard 18", 24" or 48" T8 fluorescent bulb (not included) Energy Use 4.4 w 7.2 w 9.8 w 15.0 w 17.0 w Remote Door Switch • Permits convenient door activated on-off function of lights & air conditioners. • Can be wired normally open or normally closed. • 115/230 V AC FLKDS FDS1 Part No. FLKDS FDS1 For use with 1418, 1422, 1447, 2UD, UHD Eclipse, HME Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 452 www.hammondmfg.com General Accessories General Accessories Touch-Up Spray Paint Touch Up - Spray Can • For use in matching standard Hammond colors. • Provided in 12 oz. spray cans. Part No. 1413BKLGS 1413BKS 1413CGRALS 1413LRS 1413NS 1413LGS 1413WH9003 Color Black - Low Gloss Black Beige RAL 7032 ANSI 61 Gray White Light Gray RAL 7035 White RAL 9003 General Accessories Casters • • • • Packaged in sets of four. 800 lb. load capacity per set. 4" swivel casters with brakes. Features zinc plated ball bearing pivot, composite wheels. 1425D Part No. 1425 Series Casters • Packaged in sets of four. • Feature ball bearing, swivel and hard composition wheels. • Available for 3 weight capacities. Part No. 1425B 1425BM 1425BH Mfg. Specified Capacity (Set of 4) 360 700 1050 Technical references and CAD downloads available at www.hammondmfg.com 455 Wheel Diameter (inches) 3.0 3.0 3.0 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com General Accessories General Accessories Literature Pocket Kit Part No. PKT66 PKT99 PKT1212 • For use as additional or replacement literature pockets. • Kit includes pocket, high strength two-sided adhesive tape and surface preparation swab. • Plastic pocket is black. • Packaged individually. • Prevents floor mounted enclosures from falling over while being worked on before they are bolted to the floor. • Install by slipping under enclosure mounting foot and tightening two thumb screws. • Finished in gray. Part No. 1481ES (1 pair) Width 6 9 12 Depth 0.75 0.75 2.50 Overall Dimensions 8 x 30 Panel Lifting Handles • Used for lifting, transporting and installing panel assemblies in enclosures that are positioned horizontally. General Accessories Enclosure Stabilizers Height 6 6 12 1481H Part No. Neoprene Gasket Kit - NEMA 12 Enclosures • Self-adhesive cellular neoprene gasket for NEMA 12 enclosures. • Supplied in 10 foot rolls, 0.19" x 0.75". Urethane Gasket Kit - NEMA 4, 4X Enclosures • Self adhesive microcell urethane gasket for NEMA 4, 4X enclosures. • Supplied in 10 foot rolls, 0.25" x 0.75". Part No. 1481DJ10 1481DJN410 Material Neoprene Urethane For NEMA Type 12 4, 4X Fold Down Shelf • Supports various equipment used temporarily to service/program switchgear inside enclosures. • Mounts with bolts through doors or sides. • Weight capacity 100 lbs. • Finished in ANSI 61 Gray. Technical references and CAD downloads available at www.hammondmfg.com Part No FDS1212GY FDS1818GY Work Surface (In.) W D 12 12 18 18 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 456 www.hammondmfg.com General Accessories General Accessories Pole Mounting Kit General Accessories • Designed to mount outdoor rated enclosures - Hammond 1414N4, Eclipse, Eclipse Junior and 1418N4 Series • Individual components allows user to choose mounting configuration and/or components to purchase • Vertical channel can be lagged directly to pole or attached using optional stainless steel straps • Vertical channel prevents enclosure from twisting • Can be used on pole diameters from 4" and up • Horizontal rails sold in pairs and comes with all hardware needed to secure the enclosure to the rails • Stainless straps sold in quantities of 4 • PMSTRAP40 straps are rated for 450 lbs each and can be used for pole diameters up to 10" • PMSTRAP55 straps are rated for 250 lbs each and can be used for pole diameters up to 15" Straps Horizontal Steel Channel Vertical Steel Channel Part No. PMV1216GY PMV2024GY PMV3036GY PMV4248GY PMH15GY PMH25GY PMH35GY PMSTRAP40 PMSTRAP55 Description 1414N4 Vertical Steel Channel - Qty 1 12"-16" encl height Vertical Steel Channel - Qty 1 N/A Vertical Steel Channel - Qty 1 N/A Vertical Steel Channel - Qty 1 N/A Horizontal Steel Channel - Qty 2 12"-16" encl width Horizontal Steel Channel - Qty 2 N/A Horizontal Steel Channel - Qty 2 N/A 0.50" x 39" length 316 stainless strap - Qty 4 0.31" x 55" length 316 stainless strap - Qty 4 Use with Hammond Series Eclipse Junior (EJ) 1418N4 12"-16" encl height 12"-16" encl height N/A 20"-24" encl height N/A 30"-36" encl height N/A 42"-48" encl height 12"-16" encl width 12"-20" encl width N/A 24"-30" encl width N/A 36" encl width Technical references and CAD downloads available at www.hammondmfg.com 457 Eclipse (EN4SD) 12"-16" encl height 20"-24" encl height 30"-36" encl height 42"-48" encl height 12"-20" encl width 24" encl width 30"-36" encl width All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com General Accessories General Accessories PJ Pole Mounting Kit • Eight sizes cover PJU & PJ up to 30x24 • Adjustable steel band allows mounting on pole diameters up to 15” • Adaptable pole mounting on round, square and rectangular shapes • Minimal assembly with fewer parts for installation • Corrosion protection for long outdoor life Use with PJ Series (including all variations) PJ864,PJ1084,PJ1086 PJ1084,PJ1086, PJ12106 PJ12106, PJ14126 PJ14126, PJ16148 PJ16148, PJ18168, PJ20168 PJ242010 PJ241010, PJ242410, PJ302410 Technical references and CAD downloads available at www.hammondmfg.com Use with PJU Series (including all variations) PJU1084 PJU12106 PJ14126 PJU16148 PJU181610, PJU201610 Not available Not available All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 General Accessories Pole Mount Kit Part No. PJPOLEMNT8 PJPOLEMNT10 PJPOLEMNT12 PJPOLEMNT14 PJPOLEMNT16 PJPOLEMNT20 PJPOLEMNT24 USA: 716.630.7030 Data Subject to change without notice 458