8 7 6 5 4 3 2 1 160.79 mm [6.330 in] 140.79 mm [5.543 in] D 88.80 mm [3.496 in] (Inlay Length) 4.60 mm [0.181 in] 19.60 mm [0.772 in] B 50.75 mm [1.998 in] 17.20 mm [0.677 in] (Inner Box Depth) 83.75 mm [3.297 in] (Inlay Width) [0.335 in] 5.00 mm 4X [0.197 in 4X ] D 15.00 mm [0.591 in] 2.00 mm [0.079 in] (Inlay Depth) 90.79 mm [3.574 in] B 8.50 mm C 22.70 mm [0.894 in] A A ENCLOSURE ASSEMBLY TOP VIEW 12.50 mm [0.492 in] (Inner Lid Depth) C SECTION A-A END VIEW OF ASSEMBLY 6.00 mm [0.236 in] Polycarbonate Version Only 6.50 mm 37.70 mm [0.256 in] [1.484 in] 6.00 mm [0.236 in] File #E65324 NEMA 4, 4X SECTION B-B (SIDE VIEW OF ASSEMBLY) 2.25 mm 6.00 mm 6X [0.089 in 0.236 in 6X] 119.95 mm [4.722 in] 7.00 mm 107.00 mm [4.213 in] B [0.276 in] 111.00 mm [4.370 in] 92.00 mm [3.622 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] NOTE 3.50 mm THRU 4X [0.138 in THRU 4X ] Purchased assembly includes styled box, flanged lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) B Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 1555FF 81.00 mm [3.189 in] 83.10 mm [3.272 in] 77.00 mm 89.95 mm [3.031 in] [3.541 in] 43.99 mm [1.732 in] 1555FF Regular Enclosure 68.00 mm TYP. [2.677 in] 42.00 mm [1.654 in] 100.00 mm [3.937 in] 94.10 mm [3.705 in] A 7 1555FFGY 1555F2FGY ACCESSORIES Steel Inner Panels Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1598ATS100 77.00 mm TYP. [3.031 in] 112.99 mm [4.449 in] 6 5 4 1555FFPL SC1554 A 1555FF17 FLANGED LID INSIDE VIEW BOX INSIDE VIEW 8 General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 3 2 1