8 7 6 5 200.00 mm [7.874 in] 4 3 2 1 90.50 mm [3.563 in] A D D 113.77 mm [4.479 in] B B 120.00 mm [4.724 in] 168.83 mm [6.647 in] A ASSEMBLY 2.50 mm [0.098 in] C 190.45 mm [7.498 in] SECTION A-A 171.40 mm [6.748 in] 3.73 mm [0.147 in] 2.50 mm [0.098 in] C Polycarbonate Version Only 67.23 mm [2.647 in] 76.87 mm [3.027 in] 84.50 mm [3.327 in] 89.99 mm [3.543 in] (ORDERED SEPARATELY) 106.60 mm [4.197 in] File #E65324 NEMA 4, 4X 6.00 mm [0.236 in] 3.73 mm [0.147 in] SECTION B-B R9.53 mm 4X [0.375 in] 161.49 mm [6.358 in] NOTE STEEL INNER PANEL 194.00 mm [7.638 in] B 3.00 mm 4X [0.118 in] 187.00 mm [7.362 in] 3.00 mm 10X [0.118 in] 191.00 mm [7.520 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) B 1555U 1555U Regular Enclosure 109.42 mm [4.308 in] R7.50 mm [0.295 in] 87.00 mm 75.00 mm [3.425 in] [2.953 in] M3 BRASS INSERTS 4X 176.00 mm [6.929 in] 161.50 mm [6.358 in] 175.00 mm [6.890 in] A BOX - INSIDE 8 7 90.00 mm 108.13 mm [3.543 in] [4.257 in] 3.90 mm 4X [0.153 in] (MOUNTING HOLES) 72.00 mm [2.835 in] 24.00 mm [0.945 in] 176.00 mm [6.929 in] 90.50 mm [3.563 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 ACCESSORIES 40.00 mm [1.575 in] Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1554UPL 1591MM100 1598ATS100 SC1554 172.00 mm [6.772 in] LID - INSIDE A 1555U M4 STAINLESS STEEL INSERTS 6 1555UGY 1555U2GY 5 4 3 2 1