8 7 6 5 4 200.79 mm [7.905 in] 180.79 mm [7.118 in] 3 47.50 mm [1.870 in] A 2 1 15.00 mm [0.591 in] D D 128.80 mm [5.071 in] (Inlay Length) 4.60 mm [0.181 in] 19.60 mm [0.772 in] B 90.79 mm [3.574 in] B 83.75 mm [3.297 in] (Inlay Width) 8.50 mm [0.335 in] 5.00 mm 4X 50.75 mm [1.998 in] 42.00 mm [1.654 in] (Inner Box Depth) A ENCLOSURE ASSEMBLY TOP VIEW [0.197 in 4X ] C 2.00 mm [0.079 in] (Inlay Depth) 12.50 mm [0.492 in] (Inner Lid Depth) SECTION A-A END VIEW OF ASSEMBLY 6.00 mm [0.236 in] C 62.50 mm [2.461 in] 6.00 mm [0.236 in] Polycarbonate Version Only 6.50 mm [0.256 in] File #E65324 NEMA 4, 4X 2.25 mm 6.00 mm 6X SECTION B-B (SIDE VIEW OF ASSEMBLY) 159.95 mm [6.297 in] 147.00 mm [5.787 in] B Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] [0.089 in 0.236 in 6X ] 121.50 mm [4.783 in] 7.00 mm NOTE 3.50 mm THRU 4X 60.75 mm [2.392 in] [0.276 in] [0.138 in THRU 4X ] Purchased assembly includes styled box, flanged lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) B Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 89.95 mm [3.541 in] 84.00 mm [3.307 in] 45.00 mm [1.772 in] 80.79 mm [3.181 in] 77.00 mm [3.031 in] 58.00 mm [2.283 in] 135.00 mm [5.315 in] A 131.79 mm [5.189 in] 2.25 mm 6.00 mm 6X 154.00 mm [6.063 in] [0.089 in 0.236 in 6X ] 7 General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 6 5 4 1555JF42GY 1555J2F42GY ACCESSORIES Steel Inner Panels Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1555JFPL 1598ATS100 SC1554 A 150.79 mm [5.937 in] 1555JF42 FLANGED LID INSIDE VIEW BOX INSIDE VIEW 8 41.79 mm [1.645 in] 1555JF 1555JF Regular Enclosure 3 2 1