8 7 6 5 240.00 mm [9.449 in] 4 3 2 1 90.50 mm [3.563 in] A D D 153.69 mm [6.051 in] 160.00 mm [6.299 in] B B 231.47 mm [9.113 in] 208.74 mm [8.218 in] C 2.50 mm [0.098 in] A ASSEMBLY R9.53 mm [0.375 in] SECTION A-A 146.74 mm [5.777 in] 2.50 mm [0.098 in] Polycarbonate Version Only 138.51 mm [5.453 in] 76.37 mm [3.007 in] 84.00 mm [3.307 in] 6.00 mm [0.236 in] 216.00 mm [8.504 in] File #E65324 NEMA 4, 4X 2.79 mm 8X [0.110 in] 201.50 mm [7.933 in] SECTION B-B M4 STAINLESS STEEL INSERTS 227.00 mm [8.937 in] 3.00 mm 8X [0.118 in] 3.73 mm 4X [0.147 in] 212.42 mm [8.363 in] 231.00 mm [9.094 in] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] NOTE STEEL INNER PANEL 234.00 mm [9.213 in] B C 75.01 mm [2.953 in] (ORDERED SEPARATELY) 107.37 mm [4.227 in] 3.00 mm 12X [0.118 in] Purchased assembly includes box, styled lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) B 1555V R6.00 mm 4X [0.236 in] 1555V Regular Enclosure R7.50 mm [0.295 in] 138.50 mm [5.453 in] 115.00 mm [4.528 in] 216.00 mm [8.504 in] 127.00 mm [5.000 in] 148.26 mm [5.837 in] 216.00 mm [8.504 in] 112.00 mm [4.409 in] 140.00 mm [5.512 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 75.00 mm 149.70 mm [2.953 in] [5.894 in] 201.50 mm [7.933 in] A M3 BRASS INSERTS 4X 3.90 mm 4X [0.153 in] (MOUNTING HOLES) 201.50 mm [7.933 in] 215.00 mm [8.465 in] 24.00 mm [0.945 in] 8 7 ACCESSORIES Steel Inner Panels Steel Panel / P.C. Board Machine Screw [M3 x 8mm Plated] Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 25mm Stainless Steel] 6 5 1554VPL 1591MM100 1598ATS100 SC1554V 212.00 mm [8.346 in] A 1555V LID - INSIDE BOX - INSIDE 1555VGY 1555V2GY 4 3 2 1