NTC Thermistor Temperature Sensing/Compensation Ф3 mm Lead Type NTS3 Series MERITEK RoHS E223037 FEATURES RoHS compliant Halogen-Free (HF) series are available Radial lead resin coated Operating temperature range: -40°C~+125°C Wide resistance range Cost effective Agency recognition: UL PART NUMBERING SYSTEM NTS 3 A 901 F 39D F E Meritek NTC Thermistor Product Series Body Size: 3 = Ø3mm Definition of B Value Code Type A B25/85 B B25/50 Zero Power Resistance at 25°C (R25) Code Value 901 900Ω 203 20KΩ 474 470KΩ Tolerance of R25 Code Value F ±1% G ±2% H ±3% J ±5% K ±10% B Value Code Value 374 3740 39D 3935 395 3950 39H 3975 520 5200 Tolerance of B value Code Value E ±0.75% F ±1% G ±2% H ±3% Lead Wire Type Code Type E Straight lead, Pitch 2.54mm, Ф0.5mm P Straight lead, Pitch 5mm, Ф0.5mm L Wider Kink, Pitch 2.54mm, Ф0.5mm Q Wider Kink, Pitch 5mm, Ф0.5mm F Outer Kink, Pitch 2.54mm, Ф0.5mm DIMENSIONS Lead Type P (±1) Straight Lead 2.54 5 Wider Kink 2.54 5 Outer Kink 2.54 DMAX 4 6.5 4 4 4 TMAX 3 5 3 3 3 HMAX 5 7 6 10 5 H1MAX - - - - 5.5 IMAX 3 3 - - 3 L d 30~40 24.5~34.5 0.5±0.02 (Unit: mm) Rev. 7 NTC Thermistor Temperature Sensing/Compensation Ф3 mm Lead Type NTS3 Series MERITEK RoHS ELECTRICAL CHARACTERISTICS Part No. Zero Power Resistance at 25°C Tolerance of R25 B Value Tolerance of B value Max. Power Dissipation at 25°C Dissipation Factor Thermal Time Constant Operating Temperature Range R25 (KΩ) (±%) (K) (±%) PMAX(mW) δ(mW/°C) τ (Sec.) TL~TU(°C) NTS3A901□39D* 0.9 3935 NTS3A102□39D* 1 3935 NTS3A152□39D* 1.5 3935 NTS3A202□39H* 2 3975 NTS3A222□39H* 2.2 3975 NTS3A272□39H* 2.7 3975 NTS3A302□39H* 3 3975 NTS3A332□39H* 3.3 3975 NTS3A472□39H* 4.7 3975 NTS3A482□395* 4.8 3950 NTS3A482□39H* 4.8 3975 NTS3A502□39H* 5 3975 NTS3A682□39H* 6.8 3975 NTS3A103□34D* 10 3435 NTS3A103□374* 10 3740 NTS3A103□39H* 10 3975 NTS3A123□374* 12 NTS3A153□374* 15 NTS3A203□374* 20 NTS3A203□426* 20 NTS3A223□374* 22 25/85 ±1% ±2% ±3% ±5% ±2% ±3% ±1% ±2% ±3% 3740 3740 3740 4260 ±2% ±3% 33 4090 NTS3A473□409* 47 4090 NTS3A503□39H* 50 3975 NTS3A503□406* 50 4060 NTS3A683□419* 68 4190 NTS3A104□419* 100 4190 NTS3A104□436* 100 4360 NTS3A154□437* 150 4370 NTS3A204□385* 200 3850 NTS3A224□437* 220 4370 NTS3A334□457* 330 4570 NTS3A474□457* 470 4570 NTS3A474□520* 470 5200 ±3% NTS3B202□350* 2 3500 ±2%/±3% NTS3B473□39D* 47 3935 50 NTS3B434□507* 430 ≥2.5 ≤18 -40~+125 3740 NTS3A333□409* NTS3B503□440* 150 25/50 4400 5070 NTS3B474□520* 470 5200 Note 1: □ = Tolerance of R25 * = Tolerance of B value Note 2: Special specifications are available upon request. ±1% ±2% ±3% ±2% ±3% ±1%/±2%/±3% ±2% ±3% ±3% Rev. 7 NTC Thermistor Temperature Sensing/Compensation Ф3 mm Lead Type NTS3 Series MERITEK RoHS MAX POWER DISSIPATION DERATING CURVE R-T CHARACTERISTIC CURVE Rev. 7 NTC Thermistor Temperature Sensing/Compensation Ф3 mm Lead Type NTS3 Series MERITEK RoHS R-T CHARACTERISTIC CURVE (Cont’d) SOLDERING RECOMMENDATION Wave Soldering Profile Recommended Reworking Conditions with Soldering Iron Item Conditions Temperature of Soldering Iron-tip 360°C MAX Soldering Time 3 sec. MAX Distance from Thermistor 2 mm MIN Rev. 7 NTC Thermistor Temperature Sensing/Compensation Ф3 mm Lead Type NTS3 Series MERITEK RoHS RELIABILITY Item Standard Test conditions / Methods Specifications Gradually apply the specified force and keep the unit fixed for 10±1 sec. Tensile Strength of Terminations IEC 60068-2-21 No Visible Damage Hold specimen and apply the force specified below to each lead. Bend the specimen to 90°, and then return to the original position. Repeat the procedure in the opposite direction. Bending Strength of Terminations IEC 60068-2-21 Solderability IEC 60068-2-20 245 ± 5°C, 3 ± 0.3 sec. Resistance to Soldering Heat IEC 60068-2-20 260 ± 5°C, 10 ± 1 sec. No Visible Damage |ΔR25/R25| ≤ 3% High Temperature Storage IEC 60068-2-2 125 ± 5°C, 1000 ± 24 hrs No Visible Damage |ΔR25/R25| ≤ 5% Damp Heat, Steady State IEC 60068-2-3 40 ± 2°C, 90~95% RH, 1000 ± 24 hrs No Visible Damage |ΔR25/R25| ≤ 3% Rapid Change of Temperature IEC 60068-2-14 The conditions shown below shall be repeated 5 cycles. Step Temperature (°C) Duration (minutes) 1 -40 ± 5 30 ± 3 2 Room Temperature 5±3 3 125 ± 5 30 ± 3 4 Room Temperature 5±3 No Visible Damage |ΔR25/R25| ≤ 3% Max. Power Dissipation IEC 60539-1 25 ± 5°C, PMAX, 1000 ± 24 hrs No Visible Damage |ΔR25/R25| ≤ 5% No Visible Damage At least 95% of terminal electrode is covered by new solder Rev. 7 NTC Thermistor NTS3 Series Temperature Sensing/Compensation Ф3 mm Lead Type Package MERITEK RoHS Taping Specification Straight Lead Dimension (Unit:mm W ΔP Δh L1 D0 T +1/ -0.5 MAX MAX MAX ±0.2 ±0.2 3 18 1 2 0.5 4 0.6 9 3 18 1 2 0.5 4 0.6 12 9 3 18 1 2 0.5 4 0.6 0.5 12 9 3 18 1 2 0.5 4 0.6 H1 d W0 W1 W2 W ΔP Δh L1 D0 T ±0.5 MAX ±0.02 ±1 +1/ -0.5 MAX MAX MAX ±0.2 ±0.2 5.08 16 26 0.5 12 9 3 18 1 2 0.5 4 0.6 3.85 16 26 0.5 12 9 3 18 1 2 0.5 4 0.6 P0 F P P1 H H1 d W0 W1 ±0.3 ±1 ±1 ±0.7 +2/-0 MAX ±0.02 ±1 12.7 2.54 12.7 5.08 18 25 0.5 12 9 12.7 5 12.7 3.85 18 25 0.5 12 15 2.54 15 6.23 18 25 0.5 15 5 15 5.00 18 25 P0 F P P1 H0 ±0.3 ±1 ±1 ±0.7 12.7 2.54 12.7 12.7 5 12.7 W2 +0.75 MAX /-0.5 P0=12.7 P0=15.0 Wider Kink Dimension (Unit:mm +0.75 MAX /-0.5 P0=12.7 Rev. 7 NTC Thermistor NTS3 Series Temperature Sensing/Compensation Ф3 mm Lead Type MERITEK RoHS Outer Kink Dimension (Unit:mm) P0=12.7 P0 F P P1 H0 H1 d W0 ±0.3 ±1 ±1 ±0.7 ±0.5 MAX ±0.02 ±1 12.7 2.54 12.7 5.08 16 26 0.5 12 W1 W2 +0.75 MAX /-0.5 9 3 W ΔP Δh L1 D0 T +1/ -0.5 MAX MAX MAX ±0.2 ±0.2 18 1 2 0.5 4 0.6 Quantity Packaging Quantity Bulk 500pcs / bag Tape / Reel 2500pcs / reel Tape / Ammo 2500pcs / box Rev. 7