USB-IF PROGRAM Test Report NSTL USB Low Speed Device Test Report HOLTEK SEMICONDUCTOR INC. HT82M21A OPTICAL Model Name: MOUSE Company Name: Device Type: HT82M21A Issue Date: 4/28/2005 Test Result: PASS 1/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report USB-IF Test Report Company Company Name: VID (Dec) HOLTEK SEMICONDUCTOR INC. 1241 The VID for the company who apply the USB-IF logo. Technical Contact 馬伯文 03-5631999 [email protected] 03-5641557 Name: Phone Number: E-Mail: FAX Number: Marketing Contact 林鴻坤 03-5631999 [email protected] 03-5641557 Name: Phone Number: E-Mail: FAX Number: Device Information: Retail Device Device and Silicon Hi Power Low Power Bus Powered Self Powered Silicon Only Low Speed Tethered Un-tethered with specified “B” connector (All of low speed devices must use captive cable) Device Category: PC VID: 1241 Tested O.S. Device Description: MOUSE IC PID: 1177 Windows 2000 Windows XP (Standard test fee will cover 1 OS only.) Tester: Eric Chen Review: James Ou Date: 04/28/2005 Over All Test Result: Pass 2/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report Frameworks Test Result: Chapter 9: Pass Pass Fail Fail HID View: Interface: 1 MAX Power: 100 mA Pass Fail N/A Remote Wakeup: Yes Power Current Test Result: Pass Operating Power: 73.2 mA Unconfiguration Power: 41.3 mA (<100mA) (<= Max Power <= 100mA for Low Power) (<= Max Power <= 100mA for Self Power) (<= Max Power <= 500mA for High Power) (<=Max Power <= 100mA) Fail Configuration Power: 41.6 mA (<= Max Power <= 100mA for Low Power) (<= Max Power <= 500mA for High Power) Suspend Mode Power with Remote Wake up Function: 1502 uA Suspend Mode Power without Remote Wake up Function: 1500 uA (<= 2500uA for High Power /w Remote Wake Up) (<= 500uA for others) Pass Interoperability Test Overall Result: Fail OS: W2k Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Pass Fail XP EHCI Controller: (Intel D865GLC Motherboard) 1. Enumeration and Driver installation: 2. Operation with Default Driver: 3. Update Driver: 4. Install Additional Software: 5. DUT Demonstrates Operation: 6. DUT Operation Speed: 7. Interoperability – Operate all device: 8. Hot Detach & Reattach: 9. Topology Change: 10. Warm Boot: 11. Cold Boot: 12. Active S1 Suspend and Resume: 13. Inactive S1 Suspend and Resume: 14. Active S3 Suspend and Resume: N/A N/A N/A UHCI Controller: (Intel D865GLC Motherboard) 1. Enumeration and Driver installation: 3/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report 2. Interoperability – Operate all device: 3. Hot Detach & Reattach: 4. Topology Change: 5. Warm Boot: 6. Cold Boot: 7. Active S1 Suspend and Resume: 8. Inactive S1 Suspend and Resume: 9. Active S3 Suspend and Resume: Pass Pass Pass Pass Pass Pass Pass Pass Fail Fail Fail Fail Fail Fail Fail Fail Pass Pass Pass Pass Pass Pass Pass Pass Pass Fail Fail Fail Fail Fail Fail Fail Fail Fail Pass Pass Fail Fail Low Speed UP Stream Signal Quality: Pass Fail Inrush Current Test: Pass Fail OHCI Controller: (PCI Add-on Card) 1. Enumeration and Driver installation: 2. Interoperability – Operate all device: 3. Hot Detach & Reattach: 4. Topology Change: 5. Warm Boot: 6. Cold Boot: 7. Active S1 Suspend and Resume: 8. Inactive S1 Suspend and Resume: 9. Active S3 Suspend and Resume: EHCI Controller: (PCI Add-on Card) 1. Enumeration and Driver installation: 2. Active S3 Suspend and Resume: Signal Quality Test Result: Pass Fail (<= 100mA and 200uC) Back Voltage Test: (Enumerate before/after) Pass Fail D+: 0V / 0V D- : 0V / 0V VBus: 0V / 0V (All values <= 400mV) 4/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report More Detail Test Result: 1. Power Current Test: Pass with waiver The suspend current cannot exceed 500uA. *** Specification: All devices must draw 500uA or less current while in suspend unless the device is high-powered and has remote wakeup enabled where 2500uA is permitted *** *** Waiver ID 17: The USB-IF allows any device consume up to 2500uA while suspended *** 2. Low Speed Upstream Signal Quality Test: Pass • Overall result: pass! • Signal eye: eye passes • EOP width: 1.33µs EOP width passes • Receivers: reliable operation on tier 6 receivers pass • Measured signaling rate: 1.4998MHz signal rate passes • Crossover voltage range: 1.75V to 1.87V, mean crossover 1.81V (first crossover at 1.77V, 10 other differential crossovers checked) crossover voltages pass • Consecutive jitter range: -1.7ns to 1.0ns, RMS jitter 0.8ns Paired JK jitter range: -0.5ns to 0.3ns, RMS jitter 0.3ns Paired KJ jitter range: -1.4ns to 0.9ns, RMS jitter 0.7ns jitter passes Signal Data and Eye 5/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report 6/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report 3. Inrush Current Test: Pass • Overall result: pass! • Inrush at 5.150V: 27.43µC inrush passes Hot Plug (Attach) Current Draw 7/7 Last Update: 2004/05/13