USB-IF PROGRAM Test Report NSTL USB Low Speed Device Test Report Company Name: HOLTEK SEMICONDUCTOR INC. Model Name: HT82K629A Device Type: HT82K95A Issue Date: 02/22/2005 Test Result: PASS 1/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report USB-IF Test Report Company Company Name: VID (Dec) HOLTEK SEMICONDUCTOR INC. 1241 The VID for the company who apply the USB-IF logo. Technical Contact 馬伯文 03-5631999 [email protected] 03-5641557 Name: Phone Number: E-Mail: FAX Number: Marketing Contact 林鴻坤 03-5631999 [email protected] 03-5641557 Name: Phone Number: E-Mail: FAX Number: Device Information: Retail Device Device and Silicon Hi Power Low Power Bus Powered Self Powered Silicon Only Low Speed Tethered Un-tethered with specified “B” connector (All of low speed devices must use captive cable) Device Category: PC VID: 1241 Tested O.S. Device Description: KEYBOARD IC PID: 1203 Windows 2000 Windows XP (Standard test fee will cover 1 OS only.) Tester: Sam Chen Review: James Ou Date: 02/22/2005 Over All Test Result: Pass 2/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report Frameworks Test Result: Chapter 9: Pass Pass Fail Fail HID View: Interface: 2 MAX Power: 100 mA Pass Fail N/A Remote Wakeup: Yes Power Current Test Result: Pass Operating Power: 22.1 mA Unconfiguration Power: 4.8 mA (<100mA) (<= Max Power <= 100mA for Low Power) (<= Max Power <= 100mA for Self Power) (<= Max Power <= 500mA for High Power) (<=Max Power <= 100mA) Fail Configuration Power: 4.8 mA (<= Max Power <= 100mA for Low Power) (<= Max Power <= 500mA for High Power) Suspend Mode Power with Remote Wakeup: 327 uA Suspend Mode Power without Remote Wakeup: 327 uA (<= 2500uA for High Power /w Remote Wake Up) (<= 500uA for others) Interoperability Test Overall Result: Pass Fail OS: W2k Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Fail Pass Fail XP EHCI Controller: (Intel D865GLC Motherboard) 1. Enumeration and Driver installation: 2. Operation with Default Driver: 3. Update Driver: 4. Install Additional Software: 5. DUT Demonstrates Operation: 6. DUT Operation Speed: 7. Interoperability – Operate all device: 8. Hot Detach & Reattach: 9. Topology Change: 10. Warm Boot: 11. Cold Boot: 12. Active S1 Suspend and Resume: 13. Inactive S1 Suspend and Resume: 14. Active S3 Suspend and Resume: N/A N/A N/A UHCI Controller: (Intel D865GLC Motherboard) 1. Enumeration and Driver installation: 3/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report 2. Interoperability – Operate all device: 3. Hot Detach & Reattach: 4. Topology Change: 5. Warm Boot: 6. Cold Boot: 7. Active S1 Suspend and Resume: 8. Inactive S1 Suspend and Resume: 9. Active S3 Suspend and Resume: Pass Pass Pass Pass Pass Pass Pass Pass Fail Fail Fail Fail Fail Fail Fail Fail Pass Pass Pass Pass Pass Pass Pass Pass Pass Fail Fail Fail Fail Fail Fail Fail Fail Fail Pass Pass Fail Fail Low Speed UP Stream Signal Quality: Pass Fail Inrush Current Test: Pass Fail OHCI Controller: (PCI Add-on Card) 1. Enumeration and Driver installation: 2. Interoperability – Operate all device: 3. Hot Detach & Reattach: 4. Topology Change: 5. Warm Boot: 6. Cold Boot: 7. Active S1 Suspend and Resume: 8. Inactive S1 Suspend and Resume: 9. Active S3 Suspend and Resume: EHCI Controller: (PCI Add-on Card) 1. Enumeration and Driver installation: 2. Active S3 Suspend and Resume: Signal Quality Test Result: Pass Fail (<= 100mA and 200uC) Back Voltage Test: (Enumerate before/after) Pass Fail D+: 0V / 0V D- : 0V / 0V VBus: 0V / 0V (All values <= 400mV) 4/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report More Detail Test Result: 1. Low Speed Upstream Signal Quality: Pass • Overall result: pass! • Signal eye: eye passes • EOP width: 1.33µs EOP width passes • Receivers: reliable operation on tier 6 receivers pass • Measured signaling rate: 1.5000MHz signal rate passes • Crossover voltage range: 1.66V to 1.92V, mean crossover 1.77V (first crossover at 1.68V, 10 other differential crossovers checked) crossover voltages pass • Consecutive jitter range: -1.7ns to 1.3ns, RMS jitter 0.9ns Paired JK jitter range: -1.4ns to 1.3ns, RMS jitter 0.9ns Paired KJ jitter range: -0.6ns to 1.3ns, RMS jitter 0.6ns jitter passes Signal Data and Eye 5/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report 6/7 Last Update: 2004/05/13 USB-IF PROGRAM Test Report 2. Inrush Current: Pass with Warning • Overall result: pass! • Inrush at 5.150V: 69.8µC *** inrush failure! *** (at 5.150V, maximum compliant inrush is 51.5µC) *** waiver granted *** Hot Plug (Attach) Current Draw 7/7 Last Update: 2004/05/13