M52757FP Wide Band Analog Switch REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Description The M52757FP is a semiconductor integrated circuit for the RGB interface. The device features switching signals input from two types of image sources and outputting the signals to the CRT display, etc. The frequency band of video signals is 250 MHz, acquiring high-resolution images, and are optimum as an interface IC with high-resolution CRT display and various new media. It includes Sync-separator, Video-signal-detector, and Sync-on G detector (SOG-DET.). Features • Frequency band width: R.G.B • Input level: R.G.B • Video signal-detector Responsive frequency: Input level: Detected level: 250 MHz 0.7 VP-P (Typ.) to 50 MHz 0.7 VP-P (Typ.) 150 mV (Typ.) (Measure bottom to DET. level) • Only the G channel is proved with buffer video output. • It is possible to save the consumption current by stopping current supply to Pin 2, 4, 6, 20, 24, 30, 33, 35 because SOG-DET can be operated with only VCC5 (Pin 15) as power save mode. • Include Sync Separation, Video signal detector, and Sync-on G detector. Application Display monitor Recommended Operating Condition Supply voltage range: 4.75 to 5.5 V Rated voltage: 5.0 V REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 1 of 6 M52757FP Block Diagram Sync SEP in VCC2 (G) VCC2 (R) OUTPUT (R) 36 35 34 33 G Buffer out VCC2 (for Sync on G) (B) OUTPUT (B) OUTPUT (G) 32 R 31 30 29 G 28 27 V-DET in3 25 24 2 + 3 4 + 5 6 + 7 8 9 + VCC1 VCC1 VCC1 INPUT1 (R) INPUT1 (G) INPUT1 (B) INPUT2 (G) (B) (R) (R) 10 23 + INPUT2 (G) 22 20 19 OR 12 13 Power save VCC (5 V) 14 15 16 17 18 SW GND: INPUT1 SW OPEN: INPUT2 + Sync VCC5 V-DET DET2 out INPUT2 SyncDET1 S-DET VideoDET (B) out -Hold Pin Arrangement M52757FP INPUT1 (R) 1 36 VCC2 (R) VCC1 (R) 2 35 OUTPUT (R) INPUT1 (G) 3 34 GND2 (R) VCC1 (G) 4 33 VCC2 (G) INPUT1 (B) 5 32 OUTPUT (G) VCC1 (B) 6 31 GND2 (G) INPUT2 (R) 7 30 VCC2 (B) GND1 8 29 OUTPUT (B) INPUT2 (G) 9 28 GND2 (B) GND5 10 27 G Buffer out INPUT2 (B) 11 26 Sync SEP in SyncDET1 12 25 Sync SEP out SyncDET2 13 24 VCC3 S-DETout 14 23 V-DET in3 VCC5 15 22 GND4 VideoDET-Hold 16 21 V-DET in2 V-DETout 17 20 VCC4 SWITCH 18 19 V-DET in1 (Top view) Outline: PRSP0036GA-B (36P2R-D) REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 2 of 6 21 Sync sepa 11 V-DET in1 VCC4 S-DET 1 V-DET in2 VCC3 26 G B Sync SEP out M52757FP Absolute Maximum Ratings (Ta = 25°C) Item Symbol Supply voltage VCC Power dissipation Operating temperature Storage temperature Recommended operating supply voltage Recommended operating supply voltage range Electrostatic discharge Pd Topr Tstg Vopr Vopr' Sarge Ratings 7.0 Unit V 1068 −20 to +85 −40 to +150 5.0 4.75 to 5.5 ±200 mW °C °C V V V Thermal Derating (Maximum Rating) Power Dissipation Pd (mW) 1250 1068 1000 750 500 250 0 −25 0 25 50 75 85 100 125 Ambient Temperature Ta (°C) REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 3 of 6 150 M52757FP Electrical Characteristics (VCC = 5 V, Ta = 25°C) Item Symbol Limits Typ Max 65 85 5 7 Unit Test Point (s) Input SW18 mA mA A 15 OPN OPN Circuit current 1 Circuit current 2 <RGB SW> Output DC voltage 1 Output DC voltage 2 Output DC voltage 3 Output DC voltage 4 Maximum allowable input 1 Maximum allowable input 2 Voltage gain 1 Relative voltage gain 1 Voltage gain 2 Relative voltage gain 2 Voltage gain 3 Voltage gain 4 ICC1 ICC5 Min 45 3 Vdc1 Vdc2 Vdc3 Vdc4 VImax1 VImax2 Gv1 ∆Gv1 Gv2 ∆Gv2 Gv3 Gv4 1.1 1.1 0.5 0.5 1.4 1.4 −0.1 −0.6 −0.1 −0.6 −0.6 −0.6 1.5 1.5 0.9 0.9 1.6 1.6 0.5 0 0.5 0 0 0 1.9 1.9 1.3 1.3 1.1 0.6 1.1 0.6 0.6 0.6 V V V V VP-P VP-P dB dB dB dB dB dB 29, 32, 35 OPN 29, 32, 35 GND 27 OPN 27 GND 1, 3, 5 1, 3, 5 GND 7, 9, 11 7, 9, 11 GND 29, 32, 35 1, 3, 5 GND Relative to measured values above 29, 32, 35 7, 9, 11 OPN Relative to measured values above 27 3 GND 27 9 OPN Freq. characteristic 1 (100 MHz) Relative Freq. characteristic 1 Freq. characteristic 2 (100 MHz) Relative Freq. characteristic 2 Freq. characteristic 1 (250 MHz) Freq. characteristic 2 (250 MHz) Fc1 ∆Fc1 Fc2 ∆Fc2 Fc3 Fc4 −1.0 −1.0 −1.0 −1.0 −3.0 −3.0 0 0 0 0 −1.5 −1.5 1.0 1.0 1.0 1.0 1.0 1.0 dB dB dB dB dB dB 29, 32, 35 1, 3, 5 GND Relative to measured values above 29, 32, 35 7, 9, 11 OPN Relative to measured values above 29, 32, 35 1, 3, 5 GND 29, 32, 35 7, 9, 11 OPN Crosstalk between 2 inputs 1 (10 MHz) CTI1 −60 −50 dB 29, 32, 35 1, 3, 5 GD to OP Crosstalk between 2 inputs 2 (10 MHz) CTI2 −60 −50 dB 29, 32, 35 7, 9, 11 OP to GD Crosstalk between 2 inputs 3 (100 MHz) CTI3 −40 −35 dB 29, 32, 35 1, 3, 5 GD to OP Crosstalk between 2 inputs 4 (100 MHz) CTI4 −40 −35 dB 29, 32, 35 7, 9, 11 OP to GD Crosstalk between channel 1 (10 MHz) CTC1 −50 −40 dB 29, 32, 35 1, 3, 5 GND Crosstalk between channel 2 (10 MHz) CTC2 −50 −40 dB 29, 32, 35 7, 9, 11 OPN Crosstalk between channel 3 (100 MHz) CTC3 −30 −25 dB 29, 32, 35 1, 3, 5 GND Crosstalk between channel 4 (100 MHz) Pulse characteristic 1 CTC4 −30 −25 dB 29, 32, 35 7, 9, 11 OPN Tr1 Tf1 Tr2 Tf2 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 ns ns ns ns 29, 32, 35 29, 32, 35 29, 32, 35 29, 32, 35 1, 3, 5 1, 3, 5 7, 9, 11 7, 9, 11 GND GND OPN OPN SYrv SYVH SYVL TdSf TdSb 0.2 4.5 4.9 0.2 60 60 0.4 VP-P V V ns ns 25 25 25 25 25 26 26 26 26 26 Pulse characteristic 2 <SYNC SEP> Sync input min. level Sync-sep output Hi level Sync-sep output Low level Sync-sep output delay time 1 Sync-sep output delay time 2 REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 4 of 6 M52757FP Electrical Characteristics (cont.) Item <SYNC DET> Min. detectable Sync amplitude Max. detectable Sync width Sync-DET output high level Sync-DET output low level Max. allowable input noise level <VIDEO DET> Allowable input DC range Allowable input amplitude range Min. detectable input level Max. allowable input noise level Max. input pulse width Video-DET output Hi level Video-DET output Low level Limits Typ Max Symbol Min SDETrv SDETrt SDVH SDVL SDETnv 0.2 4.5 4.0 4.9 0.2 VDinV VDin VDETrv VDETnv VDETrt SDVH SDVL 2.0 0.15 4.2 2.4 0.7 10.0 4.8 0.7 REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 5 of 6 Unit Test Point (s) Input SW18 0.4 0.05 VP-P µs V V VP-P 14 14 14 14 14 3, 9 3, 9 3, 9 3, 9 3, 9 2.8 1.0 0.1 1.0 V VP-P VP-P VP-P ns V V 19, 21, 23 19, 21, 23 17 17 17 17 17 19, 21, 23 19, 21, 23 19, 21, 23 19, 21, 23 19, 21, 23 19, 21, 23 19, 21, 23 M52757FP Package Dimensions JEITA Package Code P-SSOP36-8.4x15-0.80 RENESAS Code PRSP0036GA-B Previous Code 36P2R-D MASS[Typ.] 0.5g E 19 *1 HE 36 F NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. 18 1 Index mark c D A *2 A2 y bp L e *3 A1 Detail F REJ03F0195-0201 Rev.2.01 Mar 31, 2008 Page 6 of 6 Reference Symbol D E A2 A A1 bp c HE e y L Dimension in Millimeters Min Nom Max 14.8 15.0 15.2 8.2 8.4 8.6 2.05 2.35 0 0.1 0.2 0.3 0.35 0.45 0.18 0.2 0.25 0° 8° 11.63 11.93 12.23 0.65 0.8 0.95 0.10 0.3 0.5 0.7 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2