LUR405 thru LUR460 Glass Passivated Junction Ultra Fast Rectifiers Reverse Voltage 50 to 600V Forward Current 4.0A FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Capable of meeting environmental standards of MIL-S-19500 * For use in high frequency rectifier circuits * Fast switching for high efficiency * High temperature soldering guaranteed: 260°C/10 seconds * 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-201AD, molded plastic over glass die Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.038 oz., 1.03 g Handling precautin:None 1.Maximum & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Maximum repetitive peak reverse voltage VRRM LUR 405 50 Maximum RMS voltage VRMS 35 70 105 140 280 350 420 V Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths at TA = 75°C VDC 50 100 150 200 400 500 600 V Typical thermal resistance (Note 2) Operating junction and storage temperature range Parameter Symbol symbol LUR 410 100 LUR 415 150 LUR 420 200 LUR 440 400 LUR 450 500 LUR 460 600 Unit V IF(AV) 4.0 A IFSM 150 A IR(AV) 100 µA RθJA TJ, TSTG 20 –65 to +150 °C/W °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol Maximum Instantaneous Forward Voltage (IF = 4.0 Amps, TJ = 150°C) (IF = 4.0 Amps, TJ = 25°C) VF Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths (Rated dc Voltage, TJ = 150°C) (Rated dc Voltage, TJ = 25°C) IR Typical reverse recovery time (Note 1) Typical junction capacitance at 4.0V, 1MHz NOTES: trr CJ LUR 405 LUR 410 LUR 415 LUR 420 0.895 0.930 LUR 440 LUR 450 1.05 1.25 1.13 1.50 1. IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted 50 45 Unit V µA 200 5.0 35 LUR 460 ns PF LUR405 thru LUR460 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 60 Hz Resistive or Inductive Load 4.0 2.0 0.375" (9.5mm) Lead Length 0 0 25 50 75 100 125 150 175 Ambient Temperature, °C Average Forward Rectified Current (A) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve Instantaneous Reverse Current (µA) 10 1.0 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.1 0.01 0.6 100 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 100 10 1 10 100 Number of Cycles at 60Hz 1000 Fig 4. – Typical Reverse Characteristics 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) 1000 Tj=150℃ 100 Tj=75 ℃ 10 1.0 0.1 Tj=25℃ 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 5. –typical transient thermal impedance Fig 6. – Typical Junction Capacitance Junction Capacitance (pF) Transient thermal impedance(°C/W) Instantaneous Forward Current (A) Fig 3. – Typical Instantaneous Forward Characteristics 100 200 10 1.0 0.1 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 200 100 10 0.01 0.1 1.0 10 t,Pulse duration,sec 100 0 10 20 30 Reverse Voltage (V) 40 50 LUR405 thru LUR460 3. dimension: 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 1 页 1 弹带盒装 ammo and box 1.1. 弹带盒规格 ammo spec. 单位：mm L W H T52 262±2 76±2 90±2 T42 T26 262±2 250±3 64±2 45±3 90±2 95±3 1.2 弹带内盒要求 inner box spec. ROHS标签 label LRC标签 label 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 2 页 1.4 标签要求 label spec. 1.4.1 LRC标签 LRC label ******* 成型规格forming spec. LRC产品型号 type 产品重复峰压值 peak repetive voltage **** 产品额定电流值 average output current ** 产品数量 quantity **** ******* 产品生产日期 date 1.4.2环保标签 environmental protection label 2.外箱规格 cartoon spec. 单位：mm H W L W H T52 430±2 280±2 225±2 T42 410±2 285±2 300±2 T26 435±3 280±3 295±3 外箱标签cartoon label L 3 按以上包装方式，编带数量和外包装箱产品数量：typing and cartoon spec. 塑封外型 A-405 & DO-41 & R-1 R-3 DO-15 DO-201AD 每根编带数量 quantity/ammo 3K 1.8K 2K(T52) 1.8K(T26) 0.8K 外箱数量（T52编带） quantity/cartoon 30K 18K 20K 8.0K 外箱数量（T26编带） quantity/cartoon 60K 36K 36K - 外箱数量（T42编带） quantity/cartoon 54K 32.4K 36K - 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 第 3 页 4 编带规格 brede spec 编带尺寸 typing dimension 尺寸代号 W 26/tape 35/tape 40/tape 26 0.0/+1.6 35 -1.0/+0.5 40 -1.0/+0.5 42/tape 52/tape 52/tape# 42 -1.0/+1.0 52 -1.0/+2.0 52 -1.0/+2.0 P 5±0.5 5±0.5 5±0.5 5±0.5 5±0.5 L1-L2 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 H 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 10±0.5 Z ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 R ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 T ＞3.5 ＞3.5 ＞3.5 ＞3.5 ＞3.5 注: 52编带# 为DO-201AD编带规格 "52编带#" just for D0-201AD ＞3.5 1. 红白编带厚度为0.05mm；两种胶带各自之间无明显色差；编带要求均为胶带。 The typing thickness is 0.05mm and color is obvious difference 2. 两端引带20~40cm. Typing lead over 20~40cm 3. 红色编带一端为二极管“负极”；白色编带一端为二极管“正极”。 red color is cathode ,white color is anode 4. 无卤 green epoxy compound（无卤产品才贴HF only） Green LUR405 thru LUR460 4、版式次更新记录 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2010-4-30 2 1.修正正向电流温度；2.更新400V以上正向浪涌电流为110A. 周杰 2011-1-25 3 1..更新400V以上正向浪涌电流为150A. 周杰 2011-3-15