1N5400 thru 1N5408 General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000V Forward Current 3.0A Feature * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * Construction utilizes void-free molded plastic technique * Low reverse leakage * High forward surge capability * Diffused junction * High temperature soldering guaranteed: 260°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-201AD, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.038 oz., 1.03 g Handling precautin:None Electrical Characteristic 1.Maximum & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Maximum repetitive peak reverse voltage symbol VRRM 1N 1N 1N 1N 1N 1N 1N 1N 1N 5400 5401 5402 5403 5404 5405 5406 5407 5408 50 100 200 300 400 500 600 800 1000 Unit V Maximum RMS voltage VRMS 35 70 140 210 280 350 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 300 400 500 600 800 1000 V Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 75°C IF(AV) 3.0 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths at TA = 105°C IR(AV) 200 µA Typical thermal resistance (Note 1) RθJA 20 °C/W Maximum DC blocking voltage temperature TA 150 °C Operating junction and storage temperature range TJ –50 to +150 °C Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA = 100°C Typical junction capacitance at 4.0V, 1MHz symbol VF 1N 1N 1N 1N 1N 1N 1N 1N 1N 5400 5401 5402 5403 5404 5405 5406 5407 5408 1.10 Unit V IR 5.0 200 µA CJ 30 PF NOTES: 1. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 1N5400 thru 1N5408 2. Characteristic Curves ( TA = 25°C unless otherwise noted ) 6.0 L=0.31"(7.9mm) L=0.5"(12.7mm) 3.0 TA=Ambient Temperature 0.375"(9.5mm)Lead Lengh P.C.B.Mounting 60 Hz Resistive or Inductive load TL=Lead Temperature with both leads heat sink mounted with length(L) as shown Instantaneous Forward Current (A) 0 100 25 50 75 100 125 Ambient Temperature, °C 10 1.0 TJ = 25°C Pulse width = 300µs 1% Duty Cycle Transient thermal impedance(°C/W) 0.01 0.6 100 0.1 0.01 0.1 1.0 10 t,Pulse duration,sec 10 100 10 100 Number of Cycles at 60Hz 1000 Tj=150℃ 10 Tj=100℃ 1.0 0.1 Tj=25℃ 0.01 Fig 5. –typical transient thermal impedance 1.0 100 Fig 4. – Typical Reverse Characteristics 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) 10 TJ = 75°C 8.3ms Single Half Sine-wave (JEDEC Method) 1 Fig 3. – Typical Instantaneous Forward Characteristics 0.1 Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 1000 150 175 Instantaneous Reverse Current (µA) 0 Average Forward Rectified Current (A) L=0.25"(6.3mm) Junction Capacitance (pF) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance 100 10 1.0 0.1 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1 10 Reverse Voltage (V) 100 1N5400 thru 1N5408 3. dimension: