RL201 thru RL207 General Purpose Plastic Rectifiers Reverse Voltage 50 to 1000V Forward Current 2.0A FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High temperature metallurgically bonded construction * Diffused junction * Capable of meeting environmental standards of MIL-S-19500 * 2.0 A operation at TA=55°C with no thermal runaway * Typical IR less than 1.0µA * High temperature soldering guaranteed: 260°C/10 seconds * 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-15, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 oz., 0.40 g Handling precautin:None We declare that the material of product compliance with ROHS requirements 1.Electrical Characteristic Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol symbol device marking code RL 201 RL 202 RL 203 RL 204 RL 205 RL 206 RL 207 RL 201 RL 202 RL 203 RL 204 RL 205 RL 206 RL 207 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5mm) lead length at TC = 55°C Peak forward surge current 8.3ms single half sinewave superimposed on rated load (JEDEC Method) Maximum full load reverse current, full cycle average,0.375"(9.5mm) lead lengths at TA = 55°C Typical thermal resistance (Note 2) Operating junction and storage temperature range V IF(AV) 2.0 A IFSM 60 A IR(AV) 100 µA RθJA TJ, TSTG 45 –50 to +150 °C/W °C Electrical Characteristics Ratingsat 25°C ambient temperature unless otherwise specified. RL RL RL RL Parameter Symbol symbol 201 202 203 204 VF 1.1 Maximum instantaneous forward voltage at 2.0A 5.0 Maximum DC reverse current TA = 25°C IR 200 at rated DC blocking voltage TJ = 125°C Typical reverse recovery time (Note 1) trr 15 Typical junction capacitance at 4.0V, 1MHz CJ NOTES: 1. IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted RL 205 RL 206 RL 207 Unit V µA ns PF RL201 thru RL207 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 60 Hz Resistive or Inductive Load 2.0 1.0 0.375" (9.5mm) Lead Length 0 0 25 50 75 100 125 150 175 Case Temperature, °C Fig 3. – Typical Instantaneous Forward Characteristics Average Forward Rectified Current (A) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 10 1.0 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Fig 5. –typical transient thermal impedance 30 0 1 10 1.0 0.1 0.01 0.1 1.0 10 t,Pulse duration,sec 100 10 Number of Cycles at 60Hz 100 Fig 4. – Typical Reverse Characteristics Tj=125℃ 1.0 Tj=75℃ 0.1 Tj=25℃ 0.01 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance Junction Capacitance (pF) 100 Transient thermal impedance(° 60 10 TJ = 25°C Pulse width = 300µs 1% Duty Cycle Instantaneous Reverse Current (µ Instantaneous Forward Current 100 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 20 10 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1.0 0.1 1 10 Reverse Voltage (V) 100 RL201 thru RL207 3. dimension: 文件编号: WI-251 标题: 塑封生产线轴向产品包装规范 第 6 版 第 第 0 次修改 3 页 5.1.2 弹带盒装 1. 弹带盒规格 单位:mm L W H 52编带尺寸 262±2 76±2 90±2 42编带尺寸 26编带尺寸 262±2 250±3 64±2 45±3 90±2 95±3 2.外箱规格 H 单位:mm L W H 52外箱尺寸 405±2 270±2 195±2 42外箱尺寸 412±2 425±3 282±2 280±3 295±2 330±3 26外箱尺寸 W L 3. 按以上包装方式,编带数量和外包装箱产品数量: 塑封外型 A-405 & DO-41 & R-1 R-3 DO-15 DO-201AD 0.8K 8K 每根编带数量 3K 1.8K 2K(T52) 1.8K(T26) T52外箱数量 30K 18K 20K T42外箱数量 54K 32.4K 36K T26外箱数量 84K 50.4K 50.4K 文件编号: WI-251 标题: 塑封生产线轴向产品包装规范 第 6 版 第 第 0 次修改 4 页 5.1.4 编带规格 Unit:mm 编带尺寸 尺寸代号 26/tape W 26 0.0/+1.6 35/tape 40/tape 35 -1.0/+0.540 -1.0/+0.5 42/tape 42 -1.0/+1.0 52/tape 52/tape# 52 -1.0/+2.0 52 -1.0/+2.0 P 5±0.5 5±0.5 5±0.5 5±0.5 5±0.5 10±0.5 L1-L2 <1.0 <1.0 <1.0 <1.0 <1.2 <1.2 H 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 Z <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 R <1.0 <1.0 <1.0 <1.0 <1.0 <1.0 T >3.5 >3.5 >3.5 >3.5 >3.5 >3.5 注: 52编带# 为DO-201AD编带规格 1. 红白编带厚度为0.05mm;两种胶带各自之间无明显色差;编带要求均为胶带。 2. 两端引带20~40cm. 3. 红色编带一端为二极管“负极”;白色编带一端为二极管“正极”。 4. 无卤(无卤产品才贴) Gree 文件编号: WI-251 标题: 塑封生产线轴向产品包装规范 第 6 版 第 第 0 次修改 5 页 5.2、轴向产品通用包装规范 5.2.1.1弹带内盒要求 ROHS LRC标签 5.2.1.2盒装要求 ROHS LRC标签 5.2.1.3卷装要求 ROHS标签 LRC标签 5.2.2标签要求 5.2.2.1.1LRC标签 二维码 型号 产地信息 批次号 周期码 数量 5.2.2.1.2环保标签 制造商信息 文件编号: WI-251 标题: 塑封生产线轴向产品包装规范 第 6 版 第 第 0 次修改 6 页 5.2.3外箱要求 站名 环保标签 收货标识 5.2.3.1收货标识 客户 型号 数量 CPN 此栏根据客户需要,若无CPN则无 5.2.3.2环保标签 5.2.3.3站名 例 XXXX 5.3.1产品出厂检验报告 每批出货时,需要附上出厂检验报告 5.3.2尾箱 同一编码每批次只允许出现一个尾数箱,对于尾数物料,须用缓冲材料对空余部分填充好, 保证物料在受到一定的外作用力下不发生明显移动,且物料间无碰撞。 RL201 thru RL207 4.Update Record 版次 1 2 更新记录 第一版 增加包装规范,调整格式 更新作者 余波 周杰 更新日期 2010-12-30 2014-5-28