SODJ***(C)A-SH SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR 200 Watt Peak Pulse Power Features * * * * * * * For surface mounted applications in order to optimize board space Low profile package Excellent clamping capability IEC61000-4-2 ESD 15kV Air,8kV contact compliance Protects one I/O line Lead-free parts meet RoHS requirments Suffix "-SH" indicates Halogen-free part, ex.SODJ5.0A-SH. Applications * * * * Personal digital assistants (PDA) Cellular handsets & Accessories Portable devices Portable instrumentation * Handhelds and notebooks We declare that the material of product is * Digital cameras Haloggen free (green epoxy compound) Mechanical data * Epoxy : UL94-V0 rated flame retardant * Case : Molded plastic, SOD123-FL/MINI SMA * Terminals :Tin Plated, solderable per MIL-STD-750,Method 2026 * Polarity : Indicated by cathode band * Mounting Position : Any * Weight : Approximated 0.0155 gram 1.Maximum ratings and Electrical Characteristics (AT T =25 AoC unless otherwise noted) SYMBOL VALUE UNITS Peak Power Dissipation at T A=25°C, TP=1ms(Note 1) PARAMETER PPPM Minimum 200 Watts Steady State Power Dissipation at T L=75°C(Note 2) PM(AV) 0.5 Watts IFSM 20 Amps Operating Temperature Range TJ, -55 to +150 °C Storage Temperature Range TSTG -55 to +175 °C Peak Forward Surge Current, 8.3ms Single Half SineWave Superimposed on Rated Load(JECED Method) (Note 3) NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above T A=25°C per Fig. 2. 2. 8.0mm 2 (.013mm thick) land areas 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. SODJ***(C)A-SH UNIDIRECTIONAL PART NUMBER SODJ5.0A-SH SODJ6.0A-SH SODJ6.5A-SH SODJ7.0A-SH SODJ7.5A-SH SODJ8.0A-SH SODJ8.5A-SH SODJ9.0A-SH SODJ10A-SH SODJ11A-SH SODJ12A-SH SODJ13A-SH SODJ14A-SH SODJ15A-SH SODJ16A-SH SODJ17A-SH SODJ18A-SH SODJ20A-SH SODJ22A-SH SODJ24A-SH SODJ26A-SH SODJ28A-SH SODJ30A-SH SODJ33A-SH SODJ36A-SH SODJ40A-SH SODJ43A-SH SODJ45A-SH SODJ48A-SH SODJ51A-SH SODJ54A-SH SODJ58A-SH SODJ60A-SH SODJ64A-SH SODJ70A-SH SODJ75A-SH SODJ78A-SH SODJ85A-SH SODJ90A-SH SODJ100A-SH SODJ110A-SH SODJ120A-SH SODJ130A-SH SODJ150A-SH SODJ160A-SH SODJ170A-SH BIREVERSE BREAKDOWN BREAKDOWN DIRECTIONAL STAND-OFF VOLTAGE VOLTAGE PART VOLTAGE VBR (V) VBR (V) NUMBER VRWM (V) MIN. @IT MAX. @IT SODJ5.0CA-SH 5 6.4 7 SODJ6.0CA-SH 6 6.67 7.37 SODJ6.5CA-SH 6.5 7.22 7.98 SODJ7.0CA-SH 7 7.78 8.6 SODJ7.5CA-SH 7.5 8.33 9.21 SODJ8.0CA-SH 8 8.89 9.83 SODJ8.5CA-SH 8.5 9.44 10.4 SODJ9.0CA-SH 9 10 11.1 SODJ10CA-SH 10 11.1 12.3 SODJ11CA-SH 11 12.2 13.5 SODJ12CA-SH 12 13.3 14.7 SODJ13CA-SH 13 14.4 15.9 SODJ14CA-SH 14 15.6 17.2 SODJ15CA-SH 15 16.7 18.5 SODJ16CA-SH 16 17.8 19.7 SODJ17CA-SH 17 18.9 20.9 SODJ18CA-SH 18 20 22.1 SODJ20CA-SH 20 22.2 24.5 SODJ22CA-SH 22 24.4 26.9 SODJ24CA-SH 24 26.7 29.5 SODJ26CA-SH 26 28.9 31.9 SODJ28CA-SH 28 31.1 34.4 SODJ30CA-SH 30 33.3 36.8 SODJ33CA-SH 33 36.7 40.6 SODJ36CA-SH 36 40 44.2 SODJ40CA-SH 40 44.4 49.1 SODJ43CA-SH 43 47.8 52.8 SODJ45CA-SH 45 50 55.3 SODJ48CA-SH 48 53.3 58.9 SODJ51CA-SH 51 56.7 62.7 SODJ54CA-SH 54 60 66.3 SODJ58CA-SH 58 64.4 71.2 SODJ60CA-SH 60 66.7 73.7 SODJ64CA-SH 64 71.1 78.6 SODJ70CA-SH 70 77.8 86 SODJ75CA-SH 75 83.3 92.1 SODJ78CA-SH 78 86.7 95.8 SODJ85CA-SH 85 94.4 104 SODJ90CA-SH 90 100 111 SODJ100CA-SH 100 111 123 SODJ110CA-SH 110 122 135 SODJ120CA-SH 120 133 147 SODJ130CA-SH 130 144 159 SODJ150CA-SH 150 167 185 SODJ160CA-SH 160 178 197 SODJ170CA-SH 170 189 209 TEST CURRENT IT (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE @IPP VC (V) 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 REVERSE LEAKAGE @VRWM IR (uA) 400 400 250 100 50 25 10 5 2.5 2.5 2.5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Device Marking Code Uni KE KG KK KM KP KR KT KV KX KZ LE LG LK LM LP LR LT LV LX LZ ME MG MK MM MP MR MT MV MX MZ NE NG NK NM NP NR NT NV NX NZ PE PG PK PM PP PR Bi AE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BZ BZ CE CG CK CM CP CR CT CV CX CZ DE DG DK DM DP DR DT DV DX DZ EE EG EK EM EP ER SODJ***(C)A-SH 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 1-Peak Pulse Power Rating Curve Fig. 2-Power Derating Curve PPPM, Peak Pulse Power,KW 100 Non-Repetive Pulse Waveform Shown in Fig.3 TA=25°C 10 5.0~91A 100A~300A 1.0 0.1 0.1 1.0 10 100 td,Pulse Width,μsec 1000 10000 Fig. 4-Typical Junction Capacitance Unidirectional Fig. 3-Pulse Waveform 10000 TA=25℃ Test Waveform tf=10μs td=1000μs tf=10μs 100 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p Cj, Capacitance,pF IPPM, Peak Pulse Current % 150 Peak Value Ippm 10/1000μs Waveform as deffused by R.E.A 50 Half Value Ipp/2=td 0 Uni-Directional 100 Bi-Directional 10 0 100 1.0 2.0 t,Time,ms 3.0 1.0 10 100 1000 V(WM),Reverse Stand-off Voltage,Voltage Fig. 6-Maximum Non-Repetitive Peak Forward Surge Current Uniderictional Fig 5. –typical transient thermal impedance IFSM, Forward Surge Current,Amperes Transient thermal impedance(°C/W) meansured at stand-off voltage VWM 1000 10 1.0 0.1 0.01 0.1 1.0 10 t,Pulse duration,sec 100 100 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 10 1 10 100 Number of Cycles At 60 Hz SODJ***(C)A-SH 3. dimension: SOD123-FL DIM A B C D E H J K MILLIMETERS MIN MAX 3.5 3.9 0.75 0.95 2.6 3.0 1.6 2.0 0.45Typ 0.9 1.2 0.12 0.22 0.8Typ INCHES MIN MAX 0.138 0.159 0.029 0.037 0.103 0.119 0.063 0.079 0.018Typ 0.036 0.047 0.005 0.009 0.032Typ Suggested solder pad layout Dimensions in inches and (millimeters) PACKAGE A B C SOD123-FL 0.044(1.10 0.040(1.00) 0.079(2.00) SODJ***(C)A-SH 4.Packing information Unit:mm Item Symbol tolerance SOD123-FL Carrier width A 0.1 2.00 Carrier length B 0.1 3.85 Carrier depth C 0.1 1.10 Sprocket hole d 0.1 1.50 13" Reel outside diameter D 2.0 - 13" Reel inner diameter D1 min - 7" Reel outside diameter D 2.0 178.00 7" Reel inner diameter D1 min 62.00 Feed hole diameter D2 0.5 13.00 Sprocket hole position E 0.1 1.75 Punch hole position F 0.1 3.50 Punch hole pitch P 0.1 4.00 Spocket hole pitch P0 0.1 4.00 Embossment center P1 0.1 2.00 Overall tape thickness T 0.1 0.23 Tape width W 0.3 8.00 Reel width W1 1.0 11.40 SODJ***(C)A-SH Reel packing PACKAGE REEL SIZE SOD123-FL 7" REEL COMPONENT SPACING (PCS) (mm) 3,000 4.0 BOX INNER BOX REEL DIA. (pcs) (mm) (mm) 30,000 183*183*123 178 5.Suggested thermal profile for soldering process 1. Storage environment:Temperature=5~40℃ Humidity=55±25% 2. Reflow soldering of surface-mount device 3. Reflow soldering Profile Feature Soldering Condition Average ramp-up rate(TL to TP) <3℃/sec Preheat - Temperature Min(Tsmin) - Temperature Max(Tsmax) - Time(min to max)(ts) 150℃ 200℃ 60~120sec Tsmax to TL - Ramp-up Rate <3sec Time maintained above: - Temperature (TL) 217℃ - Time(tL) 60-260sec Peak Temperature(TP) 255 -0/+5℃ Time within 5℃ of actual Peak Temperature(TP) Ramp-down Rate Time 25℃ to Peak Temperature 10~30sec <6℃/sec <6minutes CARTON SIZE (mm) 382*262*387 APPOX. CARTON GROSS (PCS) WEIGHT 240,000 (kg) 8.7 SODJ***(C)A-SH 6.High reliability test capabilities Item Test Condition Reference Solder Resistance at 260±5℃ for 10±2sec immerse body into solder 1/16" ± 1/32" MIL-STD-750D METHOD-2031 Solderability at 245±5℃ for 5 sec MIL-STD-202F METHOD-208 High Temperature Reverse Bias VR=80% rate at Tj=150℃ for 168hrs MIL-STD-750D METHOD-1038 Forward Operation Life Rated average rectifier current TA=25℃ for 500hrs MIL-STD-750D METHOD-1027 Intermittent Operation Life TA=25℃,IF=IO On state:power on for 5 min. Off state:power off for 5 min. on and off for 500 cycles MIL-STD-750D METHOD-1036 Pressure Cooker 15PSIG at TA=121℃ for 4hrs JESD22-A102 Temperature Cycling -55℃ to +125℃ dwelled for 30 min. MIL-STD-750D METHOD-1051 and transferred for 5min. Total 10 cycles Thermal Shock 0℃ for 5min. Rise to 100℃ for 5min. Total 10 cycles MIL-STD-750D METHOD-1056 Forward Surge 8.3ms single half sine-wave superimposed on rated load,one surge MIL-STD-750D METHOD-4066-2 Humidity at TA=85℃,RH=85% for 1000hrs MIL-STD-750D METHOD-1021 High Temperature Storage Life at 175℃ for 1000hrs MIL-STD-750D METHOD-1031 SODJ***(C)A-SH 7. Update Record 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2012.12.12 2 因为所有SOD123系列均为无卤塑料,所以取消印字下划线 周杰 2013.01.04 3 将封装SOD-123S修正为SOD123-FL 周杰 2013.03.20