67060 TWO EAR SLOTTED OPTICAL INTERRUPTER PROTON AND TOTAL DOSE TOLERANT OPTOELECTRONIC PRODUCTS DIVISION 02/21/2011 Features: Applications: • • • • • • Non-contact switching 0.130” wide slot 0.300” lead spacing Position sensing Open sensing Rotation sensing DESCRIPTION The 67060 consists of GaAlAs light emitting diode and an NPN silicon phototransistor in hermetic coaxial packages, mounted in a plastic housing on opposite sides of a 0.125” wide slot. Phototransistor switching takes place whenever an opaque object passes through the slot. The components are available screened in accordance with MIL-PRF-19500. Available with single or dual mounting flange(s). ABSOLUTE MAXIMUM RATINGS Continuous Forward Current ..............................................................................................................................................100 mA Reverse Voltage ........................................................................................................................................................................ 3 V LED Power Dissipation (Note 2) ......................................................................................................................................... 50 mW Collector – Emitter Voltage ...................................................................................................................................................... 30 V Emitter – Collector Voltage ........................................................................................................................................................ 5 V Power Dissipation (Note 1) ............................................................................................................................................... 100 mW Storage Temperature .......................................................................................................................................... -55°C to + 100°C Operating Temperature ...................................................................................................................................... -55°C to + 100°C Lead Soldering Temperature (5 seconds, 1/16” from case) ................................................................................................ 240°C Notes: 1. Derate linearly at the rate of 1.33 mW/°C above 25°C. 2. Derate linearly at the rate of 0.66 mW/°C above 25°C. Package Dimensions Schematic Diagram 0.976 [24.79] 0.750 [19.05] 0.485 [12.32] Ø0.125 [Ø3.17] _ E + S 0.255 [6.48] 0.130 [3.30] 0.125 [3.18] A C K E 0.177 [4.50] 0.385 [9.78] OPTICAL 0.410 [10.41] CENTER LINE 0.080 [2.03] 0.100 [2.54] 0.300 [7.62] K A E C ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 67060 TWO EAR SLOTTED OPTICAL INTERRUPTER PROTON AND TOTAL DOSE TOLERANT 02/21/2011 OPTICAL/ELECTRICAL CHARACTERISTICS At 25°C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Input Diode Forward Voltage VF 2.0 V IF = 20 mA Input Diode Reverse Current IR 100 µA VR = 3 V MAX UNITS TEST CONDITIONS OUTPUT PHOTOTRANSISTOR At 25°C unless otherwise specified. PARAMETER SYMBOL MIN Collector – Emitter Breakdown Voltage V(BR)CEO 30 V IC = 1 mA Emitter – Collector Breakdown Voltage V(BR)ECO 5 V IE = 100 µA 100 nA VCE = 10 V MAX UNITS TEST CONDITIONS 0.40 V IC = 2 mA, IF = 20 mA mA VCE = 5 V, IF = 20 mA Collector – Emitter Dark Current TYP ICEO COUPLED CHARACTERISTICS At 25°C unless otherwise specified. PARAMETER Collector – Emitter Saturation Voltage Collector Current SYMBOL MIN TYP VCE(SAT) IC(ON) 4 SELECTION GUIDE PART # PART DESCRIPTION 67060-011 Commercial 67060-111 Screened MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM