67060 Mii SLOTTED OPTICAL INTERRUPTER PROTON AND TOTAL DOSE TOLERANT OPTOELECTRONIC PRODUCTS DIVISION Rev - 11/4/02 Features: Applications: • • • • • • Non-contact switching 0.130” wide slot 0.300” lead spacing Position sensing Open sensing Rotation sensing DESCRIPTION The 67060 consists of GaAlAs light emitting diode and an NPN silicon phototransistor in hermetic coaxial packages, mounted in a plastic housing on opposite sides of a 0.125” wide slot. Phototransistor switching takes place whenever an opaque object passes through the slot. The components are available screened in accordance with MIL-PRF-19500. Available with single or dual mounting flange(s). ABSOLUTE MAXIMUM RATINGS Continuous Forward Current ..............................................................................................................................................100 mA Reverse Voltage ........................................................................................................................................................................3 V LED Power Dissipation ..................................................................................................................................................100 mW 1/ Continuous Forward LED Current .........................................................................................................................................40mA Collector – Emitter Voltage ......................................................................................................................................................30 V Emitter – Collector Voltage ........................................................................................................................................................5 V Power Dissipation ..........................................................................................................................................................100 mW 1/ Storage Temperature.......................................................................................................................................... -55°C to + 100°C Operating Temperature ...................................................................................................................................... -55°C to + 100°C Lead Soldering Temperature (1/16 inch from case – 5 seconds)........................................................................................ 240°C Notes: (1) Derate linearly @ 1.33 mW/°C for TA > 25°C. Package Dimensions Schematic Diagram 0.484 [0.48] _ E + S 0.484 [0.48] 0.250 [0.25] 0.130 [0.13] 0.177 [0.18] 0.425 [0.43] A C K E 0.125 [0.13] 0.348 [0.35] OPTICAL CENTER LINE 0.100 [0.10] 0.300 [0.30] K A E C NOTE: ALL LINEAR DIMENSIONS ARE IN INCHES (MILLIMETERS) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 9-4 67060 SLOTTED OPTICAL INTERRUPTER Rev - 11/4/02 OPTICAL/ELECTRICAL CHARACTERISTICS At 25°C unless otherwise specified. MAX UNITS TEST CONDITIONS Input Diode Forward Voltage PARAMETER SYMBOL VF MIN TYP 2.0 V IF = 10mA Input Diode Reverse Current IR 100 µA VR = 3V MAX OUTPUT PHOTOTRANSISTOR At 25°C unless otherwise specified. SYMBOL MIN UNITS TEST CONDITIONS Collector – Emitter Breakdown Voltage PARAMETER V(BR)CEO 30 V IC = 1 mA Emitter – Collector Breakdown Voltage V(BR)ECO 5 V IE = 100µA 100 nA VCE = 10V MAX UNITS TEST CONDITIONS 0.40 V IC = 2 mA, IF = 20mA mA VCE = 5V, IF = 20mA Collector – Emitter Dark Current TYP ICEO COUPLED CHARACTERISTICS At 25°C unless otherwise specified. PARAMETER SYMBOL Collector – Emitter Saturation Voltage Collector Current MIN TYP VCE(SAT) IC(ON) 4 SELECTION GUIDE PART # 67060-001 67060-101 PART DESCRIPTION Commercial Screened MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 9-5