61063 PHOTODIODE “PILL PACK” MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 05/29/03 Features: Applications: • • • • • • • • Hermetically sealed Fast switching speed Small package Suitable for high-density PC board mounting Incremental encoding Reflective sensors Position sensors Level sensors DESCRIPTION The 61063 is a Silicon Photodiode in a package designed to be mounted in a double-clad printed circuit board. It is lensed for minimum response to stray light. Fast operating speed makes this device the best option in applications where speed considerations predominate. Available custom binned to customer specifications or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Storage Temperature......................................................................................................................................... -65°C to +150°C Operating Temperature (See part selection guide for actual operating temperature)...................................... -55°C to +125°C Reverse Voltage .....................................................................................................................................................................30V Power Dissipation (Derate at the rate of 1.5 mW/°C above 25°C) ................................................................................. 150mW Lead Soldering Temperature (10 seconds)....................................................................................................................... 240°C Package Dimensions 0.019 [0.48] 0.009 [0.23] CERAMIC LENS Schematic Diagram A R0.010 ±0.001 [0.25] 0.092 [2.34] 0.084 [2.13] CATHODE Ø0.061 [1.55] Ø0.058 [1.47] ANODE 0.067 [1.70] 0.063 [1.60] 0.010 [0.25] 0.005 [0.01] 0.024 [0.61] 0.016 [0.41] K 0.088 [2.24] 0.082 [2.08] 0.115 [2.92] 0.102 [2.59] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 61063 PHOTODIODE “PILL PACK” 05/29/03 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. SYMBOL MIN TYP Light Current PARAMETER 61063-X01 IL 6.0 15 Dark Current 61063-X01 ID Reverse Breakdown Voltage 61063-X01 VBR Rise Time 61063-X01 tr Fall Time 61063-X01 Angular Response 61063-X01 MAX UNITS TEST CONDITIONS µA VR = 5.0V, H = 20mW/cm 1 nA VCE = 5V, H = 0 1 V IR = 100µA, H = 0 300 nS VR = 5V, RL = 1kΩ tf 300 nS VR = 5V, RL = 1kΩ θ 24 degrees 50 30 2 NOTE 2 NOTES: 2 1. Irradiance in mW/cm from a tungsten source at a color temperature of 2870K. 2. The angle between incidence for peak response and incidence for 50% of peak response. SELECTION GUIDE PART NUMBER 61063-001 61063-101 PA DESCRIPTION Commercial Screened IL (MIN) Range 6µA 6µA MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM