62087 HIGH OUTPUT 850 nm LIGHT EMITTING DIODE “PILL PACK” OPTOELECTRONIC PRODUCTS DIVISION 08/12/2009 Features: Applications • • • • • • • • Hermetically sealed 850 nm Small package PC board mountable Incremental encoding Reflective sensors Position sensors Level sensors DESCRIPTION The 62087 is a high output 850 nm Infrared Light Emitting Diode in a lensed “pill” package designed to be mounted in a double-clad printed circuit board. With it’s narrow beam angle lens and small size which make it ideal for use in optical encoders, card reader arrays, etc. Available as a commercial device or screened to methods of MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Reverse Voltage (at 25°C case temperature) ..................................................................................................................... 5 Vdc Forward Current-Continuous (Note 1) (at 25°C case temperature) ................................................................................. 100 mA Storage Temperature ..........................................................................................................................................-65°C to +150°C Operating Temperature ......................................................................................................................................-55°C to +125°C Soldering Temperature (10 seconds, 1/16” from case) ..................................................................................................... 240°C NOTES: 1. Derate linearly to 125°C case temperature at the rate of 1mA/°C above 25°C. Package Dimensions Schematic Diagram CATHODE CERAMIC 0.019 [0.48] 0.009 [0.23] LENS R0.010 ±0.001 [R0.25] A 0.092 [2.34] 0.084 [2.13] ANODE Ø0.061 [1.55] Ø0.058 [1.47] 0.010 [0.25] 0.005 [0.13] 0.067 [1.70] 0.063 [1.60] 0.088 [2.24] 0.082 [2.08] 0.135 [3.43] 0.122 [3.10] 0.024 [0.61] 0.016 [0.41] K ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 62087 HIGH OUTPUT 850 nm LIGHT EMITTING DIODE “PILL PACK” 08/12/2009 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN Output Power PO 1.8 Forward Voltage VF TYP MAX 1.8 UNITS TEST CONDITIONS mW IF = 50 mA V IF =50 mA BVR 5 V IB = 10 µA Rise Time tR 38 ns IF =50 mA Fall Time tF 15 ns IF =50 mA Peak Wavelength λP 850 nm IF =50 mA Beam Angle θ 20 degrees Reverse Breakdown Voltage Forward Max Continuous Current IF(MAX) 1 25°C Case mA 100 NOTE NOTES: 1. Angle between half-intensity points. FORWARD VOLTAGE vs FORWARD CURRENT 100 IF - FORWARD CURRENT, mA 80 60 40 20 0 0.90 1.08 1.26 1.44 1.62 1.80 VF - FORWARD VOLTAGE, V RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL Forward Current MIN IF MAX UNITS 50 mA SELECTION GUIDE PART NUMBER 62087-001 Commercial PART DESCRIPTION 62087-101 Screened to JANTX level 62087-105 Screened to JANTXV level 62087-301 Screened to JANS level MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM