62100-303S ULTRA-BRITE HERMETIC LED INDICATOR Mii OPTOELECTRONIC PRODUCTS DIVISION REVISED 12/21/00 Features: Applications: • • • • • • • • • Sunlight viewable Hermetically sealed Designed for Hi-Reliability applications Ultra-high brightness Color: Green P.C. Board Fault Indicator Logic Status Indicator Binary Data Display Power supply on/off indicator DESCRIPTION The 62100-303S is an ultra-brite green LED indicator in a specially formed, hermetically sealed TO-46 package. This indicator utilizes an ultra high efficiency MOCVD grown GaN green LED die and is screened to JANTX level. ABSOLUTE MAXIMUM RATINGS Continuous Forward Current .................................................................................................................................................... 30mA Peak Forward Current (0.5mS pulse width)............................................................................................................................100mA Forward Voltage (If =30 ma) .................................................................................................................................................. 5.5Vdc Reverse Voltage (Ir =100ua.) .................................................................................................................................................... 5Vdc Power Dissipation (Derate at the rate of 2.4 mW/°C above 50°C) ....................................................................................... 120mW Operating Temperature .......................................................................................................................................... -55°C to +100°C Storage Temperature.............................................................................................................................................. -65°C to +100°C Lead Soldering Temperature (1/16” (1.6mm) from case for 7 seconds) .................................................................................260°C Peak Transient Current (1 microsecond pulse width, 300 pulses per second..............................................................................1A Indicator Dimensions 0.186 [4.72] 0.182 [4.62] 0.240 [6.09] 0.220 [5.334] 0.024 [0.61] 0.016 [0.41] CLEAR GLASS LENS 0.220 [5.59] 0.200 [5.08] A 0.205 [5.21] 0.195 [4.95] GOLD PLATED KOVAR CATHODE Schematic Diagram A .250 MAX R0.040 [1.02] 2X LEAD 0 0.533 [13.54] MIN 0.020 [0.51] 0.016 [0.41] 0.045 [1.14] 0.035 [0.89] 0.125 [3.18] A VIEW A-A 0.042 [1.07] 0.032 [0.81] K 0.100 [2.54] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 62100-303S ULTRA-BRITE HERMETIC LED INDICATOR REVISED 12/21/00 *ELECTRICAL/OPTICAL CHARACTERISTICS PARAMETERS AXIAL LUMINOUS INTENSITY TA=-55 to +100°C UNLESS NOTED DASH # SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS -303S Iv If = 20 ma. 1.5 3.0 cd 1.0 2.0 cd 520 nm θ = 0° TA = 25°C AXIAL LUMINOUS INTENSITY -303S Iv If = 20 ma. θ = 0° TA = 100°C PEAK WAVELENGTH -303S λp REVERSE CURRENT -303S Ir Vr = 5 V FORWARD VOLTAGE -303S VF If=20ma 3.2 10 mA 4.0 Vdc RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL Forward Current IF Operating Temperature TA MIN. MAX UNITS 20 MA -55 +100 °C SELECTION GUIDE PART NUMBER 62100-303S PART DESCRIPTION GREEN TO-46 JANTX SCREENING SPECIAL LEAD CONFIGURATION MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected]