Date:- 26 November, 2002 Data Sheet Issue:- 1 Fast Recovery Diode Type M0710LC560 to M0710LC600 Old Type No.: SM46-60CXC274 Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS UNITS VRRM Repetitive peak reverse voltage, (note 1) 5600-6000 V VRSM Non-repetitive peak reverse voltage, (note 1) 5700-6100 V MAXIMUM LIMITS UNITS OTHER RATINGS IF(AVM) Maximum average forward current, Tsink=55°C, (note 2) 710 A IF(AVM) Maximum average forward current. Tsink=85°C, (note 2) 485 A IF(AVM) Maximum average forward. Tsink=85°C, (note 3) 291 A IF(RMS) Nominal RMS forward current, Tsink=25°C, (note 2) 1406 A If(d.c.) D.C. forward current, Tsink=25°C, (note 4) 1208 A IFSM Peak non-repetitive surge tp=10ms, VRM=0.6VRRM, (note 5) 8.4 kA IFSM2 Peak non-repetitive surge tp=10ms, VRM≤10V, (note 5) 9.2 I t capacity for fusing tp=10ms, VRM=0.6VRRM, (note 5) It 2 I t capacity for fusing tp=10ms, VRM≤10V, (note 5) TS Operating temperature range -40 to +125 °C Tstg Storage temperature range -40 to +150 °C It 2 2 kA 2 353×10 3 As 2 423×10 3 As 2 Notes:1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C. 2) Double side cooled, single phase; 50Hz, 180° half-sinewave. 3) Single side cooled, single phase; 50Hz, 180° half-sinewave. 4) Double side cooled. 5) Half-sinewave, 125°C Tj initial. Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 Page 1 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 Characteristics PARAMETER MIN. TYP. MAX. TEST CONDITIONS (Note 1) UNITS VFM Maximum peak forward voltage - - 2.5 IFM=1200A VFM Maximum peak forward voltage - - 2.67 IFM=1400A VT0 Threshold voltage - - 1.45 V rT Slope resistance - - 0.875 mΩ VFRM Maximum forward recovery voltage - - 800 di/dt = 1000A/µs V - - 370 di/dt = 1000A/µs, Tj = 25°C V IRRM Peak reverse current - - 100 Rated VRRM Qrr Recovered charge - 2100 - Qra Recovered charge, 50% Chord - 1000 1350 V mA µC IFM=1000A, tp=500µs, di/dt=200A/µs, Vr=50V, 50% Chord. µC Irm Reverse recovery current - 500 - A trr Reverse recovery time, 50% Chord - 4.0 - RthJK Thermal resistance, junction to heatsink - - 0.033 Double side cooled - - 0.066 Single side cooled F Mounting force 10 - 20 kN Wt Weight - 340 - g µs K/W Notes:1) Unless otherwise indicated Tj=125°C. Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 Page 2 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 Notes on Ratings and Characteristics 1.0 Voltage Grade Table Voltage Grade VRSM (V) 5700 5900 6100 VRRM (V) 5600 5800 6000 56 58 60 VR dc (V) 2320 2360 2400 2.0 De-rating Factor A blocking voltage de-rating factor of 0.13% per °C is applicable to this device for Tj below 25°C. 3.0 ABCD Constants These constants (applicable only over current range of VF characteristic in Figure 1) are the coefficients of the expression for the forward characteristic given below: VF = A + B ⋅ ln(I F ) + C ⋅ I F + D ⋅ I F where IF = instantaneous forward current. 4.0 Reverse recovery ratings (i) Qra is based on 50% Irm chord as shown in Fig.(a) below. (ii) Qrr is based on a 150µs integration time. 150 µs I.e. Qrr = ∫i rr .dt 0 (iii) K Factor = Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 t1 t2 Page 3 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 5.0 Reverse Recovery Loss The following procedure is recommended for use where it is necessary to include reverse recovery loss. From waveforms of recovery current obtained from a high frequency shunt (see Note 1) and reverse voltage present during recovery, an instantaneous reverse recovery loss waveform must be constructed. Let the area under this waveform be E joules per pulse. A new sink temperature can then be evaluated from: [ TSINK = TJ ( MAX ) − E ⋅ k + f ⋅ Rth ( J − Hs ) ] Where k = 0.2314 (°C/W)/s E = Area under reverse loss waveform per pulse in joules (W.s.) f = Rated frequency in Hz at the original sink temperature. Rth(J-Hs) = d.c. thermal resistance (°C/W) The total dissipation is now given by: W( tot ) = W( original ) + E ⋅ f NOTE 1 - Reverse Recovery Loss by Measurement This device has a low reverse recovered charge and peak reverse recovery current. When measuring the charge, care must be taken to ensure that: (a) AC coupled devices such as current transformers are not affected by prior passage of high amplitude forward current. (b) A suitable, polarised, clipping circuit must be connected to the input of the measuring oscilloscope to avoid overloading the internal amplifiers by the relatively high amplitude forward current signal. (c) Measurement of reverse recovery waveform should be carried out with an appropriate critically damped snubber, connected across diode anode to cathode. The formula used for the calculation of this snubber is shown below: R2 = 4 ⋅ Where: Vr CS ⋅ di dt Vr = Commutating source voltage CS = Snubber capacitance R = Snubber resistance 6.0 Snubber Components When selecting snubber components, care must be taken not to use excessively large values of snubber capacitor or excessively small values of snubber resistor. Such excessive component values may lead to device damage due to the large resultant values of snubber discharge current. If required, please consult the factory for assistance. Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 Page 4 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 7.0 Computer Modelling Parameters 7.1 Device Dissipation Calculations I AV = − Vo + Vo + 4 ⋅ ff ⋅ rs ⋅ WAV 2 ⋅ ff ⋅ rs Where V0 = 1.45V, rs = 0.875mΩ ff = form factor (normally unity for fast diode applications) WAV = ∆T Rth ∆T = T j ( MAX ) − THs 7.2 Calculation of VF using ABCD Coefficients The forward characteristic IF Vs VF, on page 6 is represented in two ways; (i) the well established Vo and rs tangent used for rating purposes and (ii) a set of constants A, B, C, and D forming the coefficients of the representative equation for VF in terms of IF given below: VF = A + B ⋅ ln(I F ) + C ⋅ I F + D ⋅ I F The constants, derived by curve fitting software, are given in this report for both hot and cold characteristics. The resulting values for VF agree with the true device characteristic over a current range, which is limited to that plotted. A B 25°C Coefficients 125°C Coefficients 1.125750 1.403060 -3 -0.1246065 -4 -5.694324×10 -4 C 3.263906×10 2.857889×10 D 0.02243131 0.04679466 8.0 Frequency Ratings The curves illustrated in figures 8 to 16 are for guidance only and are superseded by the maximum ratings shown on page 1. 9.0 Square wave ratings These ratings are given for load component rate of rise of forward current of 100 and 500 A/µs. 10.0 Duty cycle lines The 100% duty cycle is represented on all the ratings by a straight line. Other duties can be included as parallel to the first. Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 Page 5 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 Curves Figure 1 – Forward characteristics of Limit device Figure 2 – Maximum forward recovery voltage 10000 10000 25°C 125°C Maximum forward recovery voltage - V FRM (V) Instantaneous forward current - IFM (A) 125°C 1000 25°C 1000 100 M0710LC560-600 Issue 1 M0710LC560-600 Issue 1 100 10 0 1 2 3 4 5 6 10 Maximum instantaneous forward voltage - VFM (V) Figure 3 - Recovered charge, Qrr 100 1000 10000 Rate of rise of forward current - di/dt (A/µs) Figure 4 - Recovered charge, Qra (50% chord) 10000 10000 M0710LC560-600 Issue 1 M0710LC560-600 Issue 1 Tj = 125°C Tj = 125°C Total recovered charge - Q rr (µC) 2000A Recovered charge - Q ra (µC) 2000A 1500A 1000A 500A 1500A 1000A 500A 1000 100 1000 10 100 10 1000 Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 100 1000 Commutation rate - di/dt (A/µs) Commutation rate - di/dt (A/µs) Page 6 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 Figure 5 - Maximum reverse current, Irm Figure 6 - Maximum recovery time, trr (50% chord) 100 1000 Recovery time - trr (µs) Reverse recovery current - Irm (A) 2000A 1500A 1000A 500A 10 2000A 1500A 1000A 500A Tj = 125°C Tj = 125°C M0710LC560-600 Issue 1 M0710LC560-600 Issue 1 100 1 10 100 10 1000 Figure 7 – Reverse recovery energy per pulse 1 100 1000 Commutation rate - di/dt (A/µs) Commutation rate - di/dt (A/µs) Figure 8 - Sine wave energy per pulse 1.00E+02 M0710LC560-600 Issue 1 Tj = 125°C Vr = 200V No Snubber 1.00E+01 3kA 2kA 1kA 500A 200A 2000A Energy per pulse - Er (J) 1500A Energy per pulse (J) 1000A 500A 1.00E+00 1.00E-01 Tj = 125°C M0710LC560-600 Issue 1 1.00E-02 1.00E-05 0.1 10 100 1000 Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 1.00E-04 1.00E-03 1.00E-02 Pulse width (s) Commutation rate - di/dt (A/µs) Page 7 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 Figure 9 - Sine wave frequency vs. pulse width Figure 10 - Sine wave frequency vs. pulse width 1.00E+05 1.00E+05 M0710LC560-600 Issue 1 M0710LC560-600 Issue 1 200A THs = 85°C THs = 55°C 200A 500A 100% Duty Cycle 100% Duty Cycle 1.00E+04 1.00E+04 500A Frequency (Hz) Frequency (Hz) 1kA 1.00E+03 2kA 1kA 1.00E+03 3kA 2kA 3kA 1.00E+02 1.00E+02 1.00E+01 1.00E-05 1.00E-04 1.00E-03 1.00E+01 1.00E-05 1.00E-02 1.00E-04 Pulse width (s) 1.00E-03 1.00E-02 Pulse width (s) Figure 11 - Square wave energy per pulse Figure 12 - Square wave energy per pulse 1.00E+05 1.00E+05 M0710LC560-600 Issue 1 M0710LC560-600 Issue 1 di/dt =100A/µs di/dt =500A/µs THs = 55°C THs=55°C 200A 100% Duty Cycle 200A 100% Duty Cycle 1.00E+04 1.00E+04 500A 500A Frequency (Hz) Frequency (Hz) 1kA 1.00E+03 2kA 1.00E+02 1.00E+03 1kA 1.00E+02 2kA 3kA 3kA 1.00E+01 1.00E-05 1.00E-04 1.00E-03 1.00E+01 1.00E-05 1.00E-02 Pulse width (s) Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 Page 8 of 13 1.00E-04 1.00E-03 Pulse width (s) 1.00E-02 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 Figure 13 - Square wave frequency vs. pulse width Figure 14 - Square wave frequency vs. pulse width 1.00E+05 1.00E+05 M0710LC560-600 Issue 1 M0710LC560-600 Issue 1 di/dt =100A/µs di/dt =500A/µs THs = 85°C THs = 85°C 200A 1.00E+04 1.00E+04 100% Duty Cycle 500A 200A Frequency (Hz) Frequency (Hz) 100% Duty Cycle 1kA 1.00E+03 1.00E+03 500A 1kA 1.00E+02 1.00E+02 2kA 2kA 3kA 1.00E+01 1.00E-05 1.00E-04 1.00E-03 Pulse width (s) Figure 15 - Square wave frequency vs. pulse width 1.00E+03 1.00E+01 1.00E-05 1.00E-02 1.00E-02 Figure 16 - Square wave frequency vs. pulse width 1.00E+03 M0710LC560-600 Issue 1 di/dt =100A/µs Tj = 125°C M0710LC560-600 Issue 1 di/dt =500A/µs Tj = 125°C 1.00E+02 Energy per pulse (J) 1.00E+02 Energy per pulse (J) 1.00E-04 1.00E-03 Pulse width (s) 1.00E+01 3kA 3kA 2kA 1kA 500A 200A 1.00E+01 2kA 1.00E+00 1.00E+00 1kA 500A 200A 1.00E-01 1.00E-05 1.00E-04 1.00E-03 1.00E-01 1.00E-05 1.00E-02 Pulse width (s) Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 1.00E-04 1.00E-03 1.00E-02 Pulse width (s) Page 9 of 13 December, 2002 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 2 Figure 17 – Maximum surge and I t ratings 1.00E+07 M0710LC560-600 Issue 1 Tj (initial) = 125°C I2t: VRRM≤10V I2t: VR=60% VRRM 10000 1.00E+06 IFSM: VRRM≤10V IFSM: VR=60% VRRM 1000 1 3 5 10 1 5 Duration of surge (ms) 10 1.00E+05 50 100 Duration of surge (cycles @ 50Hz) Figure 18 – Transient thermal impedance 0.1 M0710LC560-600 Issue 1 SSC 0.066K/W Thermal impedance (K/W) DSC 0.033K/W 0.01 0.001 0.0001 0.0001 0.001 0.01 0.1 1 10 100 Time (s) Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 Page 10 of 13 December, 2002 Maximum I2t (A2s) Total peak half sine surge current - IFSM (A) 100000 WESTCODE An IXYS Company Fast Recovery Diode Types M0710LC560 to M0710LC600 Outline Drawing & Ordering Information ORDERING INFORMATION M0710 Fixed Type Code (Please quote 10 digit code as below) LC 0 Fixed outline code Voltage code VDRM/100 56-60 Fixed code Order code: M0710LC580 – 5800V VRRM, 27mm clamp height capsule. IXYS Semiconductor GmbH Edisonstraße 15 D-68623 Lampertheim Tel: +49 6206 503-0 Fax: +49 6206 503-627 E-mail: [email protected] Westcode Semiconductors Ltd Langley Park Way, Langley Park, Chippenham, Wiltshire, SN15 1GE. Tel: +44 (0)1249 444524 Fax: +44 (0)1249 659448 E-mail: WSL.sales@westcode,com IXYS Corporation 3540 Bassett Street Santa Clara CA 95054 USA Tel: +1 (408) 982 0700 Fax: +1 (408) 496 0670 E-mail: [email protected] Westcode Semiconductors Inc 3270 Cherry Avenue Long Beach CA 90807 USA Tel: +1 (562) 595 6971 Fax: +1 (562) 595 8182 E-mail: [email protected] www.westcode.com www.ixys.net The information contained herein is confidential and is protected by Copyright. The information may not be used or disclosed except with the written permission of and in the manner permitted by the proprietors Westcode Semiconductors Ltd. © Westcode Semiconductors Ltd. In the interest of product improvement, Westcode reserves the right to change specifications at any time without prior notice. Devices with a suffix code (2-letter or letter/digit/letter combination) added to their generic code are not necessarily subject to the conditions and limits contained in this report. Data Sheet. Types M0710LC560 to M0710LC600 Issue 1 Page 11 of 13 December, 2002