HD74HC1G66 Analog Switch REJ03D0188–0800Z (Previous ADE-205-314F (Z)) Rev.8.00 Jan.27.2004 Description The HD74HC1G66 is high-speed CMOS analog switch using silicon gate CMOS process. With CMOS low power dissipation, it provides high speed. The device has low ON resistance for good transfer characteristics and can take wide range of input voltage. Features • The basic gate function is lined up as Renesas uni logic series. • Supplied on emboss taping for high-speed automatic mounting. • Electrical characteristics equivalent to the HD74HC4066 Supply voltage range : 2 to 6 V Operating temperature range : –40 to +85°C • Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74HC1G66CME CMPAK-5 pin CMPAK-5A CM E (3,000 pcs/reel) Rev.8.00, Jan.27.2004, page 1 of 8 HD74HC1G66 Outline and Article Indication • HD74HC1G66 Index band Marking H = Control code CMPAK-5 Function Table Control Switch L OFF H ON H : High level L : Low level GND ≤ VIN ≤ VCC GND ≤ VOUT ≤ VCC Pin Arrangement IN/OUT 1 5 VCC OUT/IN 2 GND 4 Control 3 (Top view) Rev.8.00, Jan.27.2004, page 2 of 8 9 HD74HC1G66 Absolute Maximum Ratings Item Symbol Ratings Supply voltage range VCC –0.5 to 7.0 V Input voltage range *1 VI –0.5 to VCC + 0.5 V Output voltage range *1, 2 VO –0.5 to VCC + 0.5 V Output : H or L Input clamp current IIK ±20 mA VI < 0 or VI > VCC Output clamp current IOK ±20 mA VO < 0 or VO >VCC Continuous output current IO ±25 mA VO = 0 to VCC Continuous current through VCC or GND ICC or IGND ±25 mA Maximum power dissipation 3 at Ta = 25°C (in still air) * PT 200 mW Storage temperature Tstg –65 to 150 °C Notes: Unit Test Conditions The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Recommended Operating Conditions Item Symbol Min Supply voltage range VCC Input voltage range VI/O Output voltage range Input rise / fall time (Control input 10% to 90%) Operating temperature Max Unit 2 6 V 0 VCC V VO 0 VCC V tr, tf 0 1000 ns 0 500 VCC = 4.5 V 0 400 VCC = 6.0 V –40 85 Ta Note: Unused or floating control inputs must be held high or low. Rev.8.00, Jan.27.2004, page 3 of 8 °C Test Conditions VCC = 2.0 V HD74HC1G66 Electrical Characteristics VCC Ta = 25°C Item Symbo (V) Min Typ Max Min Input voltage VIH 2.0 1.5 — — 4.5 3.15 — — 6.0 4.2 — 2.0 — 4.5 Ta = –40 to 85°C Max Unit Test Conditions 1.5 — V Control input only 3.15 — — 4.2 — — 0.5 — 0.5 — — 1.35 — 1.35 6.0 — — 1.8 — 1.8 2.0 — 200 450 — 550 Ω 4.5 — 90 160 — 180 6.0 — 80 130 — 140 VC = VIH VIN = VCC or GND IT = 1 mA 2.0 — 600 1500 — 2000 Ω 4.5 — 125 200 — 250 6.0 — 100 170 — 210 VC = VIH VIN = 0 to VCC IIN/OUT = 1 mA IS (off) 6.0 — — ±0.1 — ±1.0 µA VC = VIL VIN = VCC, VOUT = GND or VIN = GND, VOUT = VCC IS (on) 6.0 — — ±0.1 — ±1.0 µA VC = VIH VIN = VCC or GND Input current IIN 6.0 — — ±0.1 — ±1.0 µA VIN = VCC or GND Operating current ICC 6.0 — — 1.0 — 10.0 µA VIN = VCC or GND VIL On resistance Peak on resistance Leak current RON RON (p) Rev.8.00, Jan.27.2004, page 4 of 8 HD74HC1G66 Switching Characteristics Item Propagation delay time Output enable time Output disable time Symbol tPLH, tPHL tZH, tZL tHZ, tLZ Maximum control frequency VCC Ta = 25°C (V) Min Typ 2.0 — — 50 4.5 — 4 10 6.0 — — 9 — 11 2.0 — — 115 — 145 4.5 — 10 23 — 29 6.0 — — 20 — 25 2.0 — — 115 — 145 4.5 — 14 23 — 29 6.0 — — 20 — 25 2.0 — 20 — — — 4.5 — 30 — — — 6.0 — 30 — — — Ta = –40 to 85°C Max Max Unit — 65 ns RL = 10 kΩ — 13 ns RL = 1 kΩ ns RL = 1 kΩ Min MHz Control input capacitance CIN — 2.5 5 — 5 pF Switch I/O capacitance CIN/OUT — 2.5 — — — pF Feed through capacitance CIN–OUT — 0.5 — — — pF Power dissipation capacitance CPD — 5 — — — pF (CL = 50 pF, tr = tf = 6 ns) Rev.8.00, Jan.27.2004, page 5 of 8 Test Conditions HD74HC1G66 Test Circuit • RON VCC VC = VIH VCC VIN = VCC (ON) VOUT RON = VIN-OUT 10–3 GND 1.0 mA + V (Ω) – VIN-OUT • IS (off), IS (on) VCC VCC VC = VIL VC = VIL VCC A VCC A (OFF) VIN = VCC or GND GND VOUT = GND or VCC (ON) VIN = VCC or GND GND VOUT OPEN • tPLH, tPHL VCC tr = 6 ns VC = VIH VCC VIN VOUT (ON) GND RL = 10 kΩ CL = 50 pF VIN 10% VOUT tf = 6 ns 90% 90% 50% 50% tPLH 50% VCC 10% tPHL GND VOH 50% VOL Rev.8.00, Jan.27.2004, page 6 of 8 HD74HC1G66 • tZH, tZL / tHZ, tLZ VCC VC VIN S1 tr = 6 ns RL = 1 kΩ VCC VOUT CL = 50 pF GND VC 10% S2 90% 50% tZH S1 VCC tZL tHZ GND VCC tLZ GND VCC 90% 50% 10% 90% VOUT S2 GND VCC Waveform - B GND tHZ RL = 1 kΩ VOH 50% Waveform - A Item tZH tf = 6 ns GND tZL tLZ 50% VCC 10% GND VCC VOL Notes: 1. Waveform - A is for an output with internal conditions such that the output is high except when disabled by the output control. 2. Waveform - B is for an output with internal conditions such that the output is low except when disabled by the output control. • Maximum control frequency VCC VC VCC VC VCC VIN = VCC GND GND VOUT RL = 1 kΩ CL = 15 pF VOUT VCC/2 • CIN/OUT, CIN-OUT CIN-OUT VC = GND VCC VCC (OFF) CIN/OUT Rev.8.00, Jan.27.2004, page 7 of 8 GND CIN/OUT HD74HC1G66 Package Dimensions (0.65) 1.25 ± 0.1 (0.65) 0 – 0.1 (0.2) 2.0 ± 0.2 0.9 ± 0.1 (0.425) 5 – 0.2 ± 0.05 + 0.1 0.15– 0.05 2.1 ± 0.3 1.3 ± 0.2 (0.425) Unit: mm Package Code JEDEC JEITA Mass (reference value) Rev.8.00, Jan.27.2004, page 8 of 8 CMPAK–5V — Conforms 0.006 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0