Current Sensing Chip Resistors Type SL/TSL Resistor

KOA SPEER ELECTRONICS, INC.
SS-199 R19
AHA 8/01/12
Current Sensing Chip Resistors
Type SL/TSL Resistor
CERTIFIED
CERTIFIED
1. Scope
This specification applies to current sensing chip resistors (SL/TSL) produced by KOA Corporation.
Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not
intended for Pb-glass contained in electrode, resistor element and glass.
2. Type Designation
The type designation shall be in the following form:
New Type
SL
1
T
TE
20L0
F
Type
Size
Termination
Material
Packaging
Nominal
Resistance
Tolerance
SL
SLN
SLZ
TSL
07: 0.75W
1: 1W
2: 2W
3: 3W
SL07, SL1, SLZ1, TSLT: Sn
TE: 7" Embossed Plastic
(Other
SL2, SLN2, SL3termination
TED: 10" Embossed Plastic
styles may be
(TSL - 3,000 pcs/reel)
available, please
(SL - 1,000 pcs/reel)
contact factory
for options)
±2%, ±5%: 2 significant figures + 1
multiplier “R” indicates decimal on
value <10Ω
±0.5%, ±1%: 3 significant figures + 1
multiplier “R” indicates decimal on
value <100Ω
All values less than 0.1Ω (100mΩ) are
expressed in mΩ with “L” as decimal
Example: 20mΩ, 1% = 20L0
D: ± 0.5%
F: ± 1%
G: ±2%
J: ± 5%
3. Standard Applications
Part
Designation
Power
Rating
T.C.R.
(ppm/°C)
Max.
Resistance
Range
Resistance
Tolerance
E-24*
Absolute
Maximum
Working
Voltage
Absolute
Maximum
Overload
Voltage
SL07
0.75W
0~200: R=<10mΩ
0~150: R=>11mΩ
5mΩ - 100mΩ
(F: ±1%)
(J: ±5%)
––
––
1W
±180: R=<13mΩ
±100: R=>15mΩ
10mΩ - 1MΩ
5mΩ - 1MΩ
3mΩ, 4mΩ
3mΩ ~ 22MΩ
10mΩ - 1MΩ
5mΩ ~ 1MΩ
3mΩ, 4mΩ
3mΩ - 22MΩ
(D: ±0.5%)
(F: ±1%)
(G: ±2%)
(J: ±5%)
(D: ±0.5%)
(F: ±1%)
(G: ±2%)
(J: ±5%)
200V
400V
5mΩ - 200mΩ
(D: ±0.5%)
(F: ±1%)
(J: ±5%)
SL1
SL2
2W
±180: R=<10mΩ
±100: R=>11mΩ
SLN2
2W
±110: R<10mΩ
±75: R=>10mΩ
* 3m, 4m, 5m, 6m, 7m, 8m, 9m resistance values also available
Operating
Temperature
Range
-55°C to +180°C
500V
1000V
––
––
** SLZ1: Current rating: 44A
PAGE 1 OF 5
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R19
3. Standard Applications (Cont.)
Part
Designation
Power
Rating
T.C.R.
(ppm/°C)
Max.
SL3
3W
±180: R=<10mΩ
±100: R=>11mΩ
SLZ1**
––
4000 Max.
TSL1
1W
±180: R=<13mΩ
±100: R=>15mΩ
Absolute
Maximum
Working
Voltage
Absolute
Maximum
Overload
Voltage
(F: ±1%)
(J: ±5%)
––
––
0.5mΩ Max.
––
––
––
10mΩ - 100mΩ
(D: ±0.5%)
5mΩ - 100mΩ
(F: ±1%)
(J: ±5%)
––
––
Resistance
Range
Resistance
Tolerance
E-24*
10mΩ - 100mΩ
(D: ±0.5%)
5mΩ - 100mΩ
* 3m, 4m, 5m, 6m, 7m, 8m, 9m resistance values also available
4-2 Structure
L
2
W
1
b
t
Electrode
Size
Code
SL07
c
Molded Resistive
Resin
Element
-55°C to +180°C
** SLZ1: Current rating: 44A
4. Dimensions and Structure
4-1 Dimensions
c
Operating
Temperature
Range
a
3
1 Resistive Element
Metal Plate: SL1 ≤ 100 mΩ,
SL2 ≤ 360 mΩ, SL3
Thick Film: SL1 > 100 mΩ,
SL2 > 360 mΩ
2 Flameproof Molded
Epoxy Case with UL94V-0
Flammability Rating
3 End Termination with
Tin/Lead Solder Plating
Dimensions inches (mm)
L
W
t
a
b
c
.197±.012 .098±.008 .067±.008 .079±.008 .047±.008 .035±.012
(5.0±0.3) (2.5±0.2) (1.7±0.2) (2.0±0.2) (0.9±0.2) (1.2±0.3)
SL1/SLZ1 .248±.012 .122±.008 .075±.008 .094±.008 .047±.008 .047±.012
(6.3±0.3) (3.1±0.2) (1.9±0.2) (2.4±0.2) (1.2±0.2) (1.2±0.3)
SL2
SLN2
SL3
TSL1
.453±.012 .276±.008 .098±.008 .197±.008 .067±.008 .102±.02
(11.5±0.3) (7.0±0.2) (2.5±0.2) (5.0±0.2) (1.7±0.2) (2.6±0.5)
.453±.012
(11.5±0.3)
.453±.012
(11.5±0.3)
.276±.008
(7.0±0.2)
.276±.008
(7.0±0.2)
.094±.008
(2.4±0.2)
.098±.008
(2.5±0.2)
.217±.008
(5.5±0.2)
.197±.008
(5.0±0.2)
.063±.008
(1.6±0.2)
.067±.008
(1.7±0.2)
.100±.016
(2.55±0.4)
.102±.02
(2.6±0.5)
.248±.012 .122±.008 .039±.008 .094±.008 .028±.008 .047±.012
(6.3±0.3) (3.1±0.2) (1.0±0.2) (2.4±0.2) (0.7±0.2) (1.2±0.3)
PAGE 2 OF 5
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R19
5. Rating
Derating Curve
Surface Temperature Rise
TSL1/SLN2
150
100
200
SL2 (2)
175
Temperature Rise
(°C)
TSL1 (2)
100
60
50
40
20
Temperature Rise
(°C)
125
80
% Rated Power
SL1/SL2
SLN2 (2)
150
SLN2 (1)
100
75
TSL1 (1)
50
25
0
-55
0
70
125
0
180
SL1 (2)
75
SL2 (1)
50
SL1 (1)
25
0
25
75
50
100
0
2
0
% Rated Power
Ambient Temperature
(°C)
2
2
125
25
50
75
100
% Rated Power
1
5-1 Rating SL3
5-2 Voltage Rating
For temperature in excess of 110°C, the load shall
be derated in accordance with the following figure.
Resistors shall have a rated direct-current (DC) continuous
working voltage or approximate sine-wave root-meansquare (RMS) alternating-current (AC) continuous working
voltage at commercial-line frequency and waveform
corresponding to the power rating, as determined from
the following formula:
100
80
60
40
20
0
E=√PxR
-55
0
110
125
Ambient Temperature (°C)
180
Where:
E = Rated voltage (V)
P = Rated power (W)
R = Nominal
resistance (Ω)
6. Characteristics
6-4 High Frequency Characteristics
PAGE 3 OF 5
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R19
6-1 Performance Characteristics
Parameter
Resistance
T.C.R.
Overload
(Short time)
Resistance
to Solder Heat
Rapid Change
of Temperature
Moisture
Resistance
Endurance at 70°C
Low Temperature Exposure
Requirement ∆ R ±%
Limit
Typical
Within specified
—
tolerance
Within specified
—
T.C.R.
SL07, TSL1,SL1, SL07, TSL1,SL1,
SL2: ±1%
SL2: ±1%
SLN2: ±0.5%
SLN2: ±0.25%
SL07, TSL1,SL1, SL07, TSL1,SL1,
SL2: ±1%
SL2: ±1%
SLN2: ±0.5%
SLN2: ±0.5%
SL07, TSL1,SL1, SL07, TSL1,SL1,
SL2: ±1%
SL2: ±0.5%
SLN2: ±0.5%
SLN2: ±0.25%
SL07, TSL1,SL1, SL07, TSL1,SL1,
SL2: ±2%
SL2: ±0.5%
SLN2: ±0.5%
SLN2: ±0.25%
SL07, TSL1,SL1,
SL2: ±2%
±0.5%
SLN2: ±1%
±0.5%
±0.25%
Test Method
25°C
+25°C/+125°C
SL07: Rated power x 4 for 5 seconds, TSL1: Rated power x 2.5 for 5 seconds,
SL1, SL2, SLN2: Rated power x 5 for 5 seconds,
260°C ± 5°C, 10 ± 1 second
260°C ± 5°C, 10~12 seconds
-55°C (30 minutes), +150°C (30 minutes), 100 cycles
-55°C (15 minutes), +150°C (15 minutes), 1000 cycles
40°C ± 2°C, 90%~95%RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
85°C ± 2°C, 85% ±3%RH, 1000 hours, Rated power x 0.1
70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
SL07, TSL1, SL1, SL2: -55°C, 1 hour; SLN2: -65°C, 24 hours
7. Taping
7-1 Dimensions of Carrier Tape
1.5 +0.1
-0
A
B
W
1.75±0.1
Carrier Tape
P1
(TP)
2.0 4.0±0.1
P1
T1
T1
T1
Direction of feed
(Notes) Dotted lines are applicable to only “TP” and “TB.”
Component Size (mm)
Type
SL
SLN
TSL
0.7
1
2/3
2
1
L
W
T
5.0
6.3
11.5
11.5
6.3
0.5
3.1
7
7
3.1
1.7
1.9
2.5
2.5
1
Carrier
Tape
Taping (mm)
Quantity/
Reel
(Pieces)
A
B
W
P1
T1
Reel
Size
2000
1000
1000
1000
3000
5.5±0.1
6.8±0.1
12.2±0.1
12.2±0.1
6.6±0.1
3.1±0.1
3.6±0.1
7.7±0.1
7.7±0.1
3.4±0.1
12
12.0±0.1
24
24
12.0±0.1
4
8.0±0.2
12.0±0.1
12±0.2
4.0±0.1
2.25±0.10
2.35±0.1
3.1±0.1
3.1±0.1
1.3±0.1
180
180
255
225
180
TE
TE
TED
TE
TE
PAGE 4 OF 5
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA SPEER ELECTRONICS, INC.
SS-199 R19
7-2 Taped Configuration
End tape
(Empty)
Dimensions in inches (mm)
Leader tape
(Top tape)
(Empty)
1.57 (40) min.
3.15 (80) min.
5.90 (150) min.
7-3 Reel Dimensions
Reel
(mm)
Type
All
øa
Central hole
ø13
ød (mm)
21
e (mm)
2
ød
e
(Notes) Reel holes, shapes and design are examples
8-1 Body and Marking
8. Recommended Land Pattern
TSL1, SL1 & SL2
B
D
A
Body color
Black
Marking color
White
Marking items
Resistance
value and
tolerance
C
Soldering Pad
Chip Component
Type
Dimensions millimeters
Style
07
SL/TSL
Component Size
A
B
C
D
5.0 X 2.5
2.3
7.0
2.6
2.35
2.3
1
6.3 X 3.1
3.4
8.0
3.0
2-3
11.5 X 7.0
5.4
15.0
5.0
4.8
2
11.5 X 7.0
5.0
15.0
6.0
5.0
SLN
PAGE 5 OF 5
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.