Flat Chip Resistor Array Type CN_K/N KOA SPEER ELECTRONICS, INC. SS-242 R10 AHA 4/15/14 CERTIFIED CERTIFIED 1. Features ■ ■ ■ ■ ■ Convex terminations with square corners Manufactured to Type RK73 standards ■ AEC-Q200 Qualified: CN1J4K only Less board space than individuals chips Isolated resistor elements Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. 2. Dimensions a L p b W C t d Protective Coating Resistive Film Ceramic Substrate Electrode Inner Electrode CN___K Convex/Square Corner CN1H2N, CN1E2K, CN1H4N, CN1E4K, CN1J2K CN1J4K R1 R2 R1 R2 R3 R4 R1 = R2 R1 = R2 = R3 = R4 Dimensions inches (mm) Size Code L W C d t a (ref.) b (ref.) 1H2N .031±.004 .024±.004 .006±.004 .006±.004 .014±.004 .012±.004 — (0201x2) (0.8±0.1) (0.6±0.1) (0.15±0.1) (0.15±0.1) (0.35±0.1) (0.3±0.1) 1H4N (0201x4) 1E2K (0402x2) .055±.004 .024±.003 .004±.003 .008±.003 .014±.004 (1.4±0.1) (0.6±0.08) (0.1±0.08) (0.2±0.08) (0.35±0.1) .039±.004 .006±.004 .010±.004 (1.0±0.1) .039±.004 (0.15±0.1) (0.25±0.1) .014±.004 1E4K .079±.004 (1.0±0.1) .006±.004 .010±.008 (0.35±0.1) (0402x4) (2.0±0.1) (0.15±0.1) (0.25±0.2) 1J2K .063±.006 (0603x2) (1.6±0.15) .063±.006 .012±.008 .010±.004 .020±.004 1J4K .126±.006 (1.6±0.15) (0.3±0.2) (0.25±0.1) (0.5±0.1) (0603x4) (3.2±0.15) 1F8K .149±.004 .063±.004 .012±.004 .012±.004 .018±.004 1FN8K (3.8±0.1) (1.6±0.1) (0.3±0.1) (0.3±0.1) (0.45±0.1) (0602x8) Type 1J Size Elements 1H 2 1E 4 1F 8 4 .020 (0.5) .008±.004 — (0.2±0.1) .013±.004 .007±.002 (0.33±0.1) (0.17±0.05) .016 (0.4) .026 (0.67) .012±.006 .006±.004 (0.3±0.15) (0.15±0.1) .020 (0.5) .024±.006 (0.6±0.15) .012±.004 .020±.006 (0.3±0.1) (0.5±0.15) 0.031 (0.8) .012±.004 (0.30±0.1) .020 (0.5) .006 (0.15) CN1F8K, CN1FN8K R1 R2 R3 R4 R5 R6 R7 R8 R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 3. Type Designation The type designation shall be the following form: CN p (ref.) 1F8 Marking Blank: Marking N: No marking 1J K T TD 101 J Terminal Convex Termination Material Packaging Nominal Resistance Tolerance K:Convex type with square corners N: Flat type with square corners T: Sn (Other termination styles available, contact factory for options) TD: 7" paper tape TDD: 10" paper tape 2 significant figures + 1 multiplier for ±5% 3 significant figures + 1 multiplier for ±1% F: ±1% J: ±5% PAGE 1 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-242 R10 4. Standard Applications Power Rating @ 70°C (Per Element) Part Designation CN1H2N CN1H4N CN1E2K CN1E4K CN1J2K CN1J4K CN1F8K CN1FN8K T.C.R. (ppm/°C) Max. Resistance Range E-24, E-96 (F±1%) Resistance Range E-24 (J±5%) Absolute Maximum Working Voltage Maximum Overload Voltage (5 Secs. Max.) 12.5V 25V 25V 50V 50V 100V 25V 50V ––– 1/32W (.031W) ±200:R>10Ω ±400:R<10Ω 1/16W (.063W) 10Ω - 1MΩ -55°C to +125°C 10Ω - 100kΩ 1Ω - 1MΩ 1/16W (.063W)* 10Ω - 1MΩ 0.25W per package Operating Temperature Range * Note that network resistors generate higher heat rather than single flat chip resistor under rated power output 5. Environmental Applications For temperature in excess of 70°C, the load shall be derated in accordance with the following figure. Derating Curve 100 % Rated Power 80 60 40 20 0 0 -55 70 125 Ambient Temperature (°C) PAGE 2 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-242 R10 5.1 Voltage Rating In no case shall the rated DC or RMS AC continuous working voltage be greater than the applicable maximum value. Resistors shall have a rated direct current (DC) continuous working voltage or an approximate sine wave root mean square (RMS) alternating current (AC) continuous working voltage at a commercial line frequency and wave form corresponding to the power rating, as determined from the following formula: Where, E =√ P x R E = Rated voltage (V) P = Power rating (W) R = Nominal resistance (Ω) 6. Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Requirement ∆ R Limit Typical Within regulated — tolerance Within specified — T.C.R. ±2.0% ±0.25% ±1.0% ±0.75% ±1.0% ±0.5% ±5.0% ±1.0% ±5.0% ±0.5% ±1.0% ±0.15% Test Method 25°C +25°C/-55°C, +25°C/+125°C Rated voltage x 2.5 for 5 seconds 260°C ± 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 5 cycles 40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle +125°C, 100 hours PAGE 3 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-242 R10 8. Packaging Specifications 8.1 Paper Tape Dimensions Component Size (mm) CN_K W T 3.8±0.1 1.00 1.6±0.2 1 0.44±0.1 0.35 1.60 1J2/1J2K 0.6/0.5 1.6 1J4/1J4K 3.20 0.6/0.5 1.5 +0.1 -0 A B W TP TP TP 5000 10000 10000 4.0±0.1 1.2±0.1 2.2±0.1 1.8±0.1 1.2±0.1 1.2±0.1 TD 5000 1.9±0.1 TDD 10000 TD 5000 TDD 10000 Taping (mm) T1 8.0±0.2 8.0±0.2 8.0±0.2 2.0±0.05 2.0±0.05 2.0±0.05 1.9±0.1 8.0±0.2 4.0±0.1 1.9±0.1 1.1±0.1 8.0±0.2 4.0±0.1 3.5±0.1 2.0±0.1 8.0±0.2 4.0±0.1 1.9±0.1 1.1±0.1 8.0±0.2 4.0±0.1 0.55±0.1 0.45±0.1 0.45±0.1 0.6+0.2/-0 0.75+0.2/-0/ 0.6+0.2/-0 0.75+0.2/-0/ 0.75+0.2/-0/ 0.75+0.2/-0/ 0.6+0.2/-0 Carrier Tape T1 178 255 178 255 1.75±0.1 (mm) Central hole ø13 e P1 (TP) 2.0 4.0±0.1 P1 178 178 178 Reel A B Reel Size P1 øa 1F8 1E2K 1E4/1E4K L W Type Quantity/ Reel (Pieces) Carrier Tape T1 Type All T1 Direction of feed (Notes) Dotted lines are applicable to only "TP" and "TB." 9. Body Color ød ød (mm) e (mm) 21 2 (Notes) Reel holes, shapes and design are examples 9.1 Body Convex 9.2 Marking Body Color: Black Marking Color: 1FN8K, 1H, 1E no marking 1J white three-digit marking ±5% 3-digit number ±1% 4-digit number 103 ➔ 10000Ω ➔ 10kΩ 1002 ➔ 10000Ω ➔ 10kΩ PAGE 4 OF 4 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.