Current Sensing Chip Resistors Type SL/TSL Resistor KOA SPEER ELECTRONICS, INC. SS-199 R02 AHA 4/15/14 CERTIFIED CERTIFIED 1. General ■ ■ ■ ■ ■ Surface mount type Flameproof UL94V0 molded polymer case Excellent dimension accuracy, mountability and shock resistance Low profile type available (TSL) Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. ■ AEC-Q200 Qualified 2. Type Designation The type designation shall be in the following form: New Type SL 1 T Type Size Termination Material SL SLN SLZ TSL 07: 0.75W W07: 1W* 1: 1W W1: 1.5W* 2: 2W 3: 3W* T: Sn L: SnPb (SL1, SL2, SL3, SLZ, TSL only) TE 20L0 F Packaging Nominal Resistance Tolerance SL07, SLW1, SL1, SLZ1, TSL - (TE: 7" embossed plastic) SL2, SLN2, SLN3, SL3 (TED: 10" embossed plastic) (TSL - 3,000 pcs/reel) (SL - 1,000 pcs/reel) ±2%, ±5%: 2 significant figures + 1 multiplier “R” indicates decimal on value <10Ω ±0.5%, ±1%: 3 significant figures + 1 multiplier “R” indicates decimal on value <100Ω All values less than 0.1Ω (100mΩ) are expressed in mΩ with “L” as decimal Example: 20mΩ, 1% = 20L0 D: ± 0.5% F: ± 1% G: ±2% J: ± 5% * Please ask us separately about Ratings and Performance PAGE 1 OF 6 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-199 R20 NEW NEW NEW 3. Standard Applications Part Designation Power Rating T.C.R. (ppm/°C) Max.*** Resistance Range Resistance Tolerance E-24* Absolute Maximum Working Voltage Absolute Maximum Overload Voltage SL07 0.75W 0~200: R=<10mΩ 0~150: R=>11mΩ 5mΩ - 100mΩ (F: ±1%) (J: ±5%) –– –– SLW07 1W 0~200: R=<10mΩ 0~150: R=>11mΩ 5mΩ - 100mΩ (F: ±1%) (J: ±5%) –– –– SL1 1W ±180: R=<13mΩ ±100: R=>15mΩ 200V 400V SLW1 1.5W ±180: R=<13mΩ ±100: R=>15mΩ –– –– SL2 2W ±180: R=<10mΩ ±100: R=>11mΩ 500V 1000V SLN2 2W ±110: R<10mΩ ±75: R=>10mΩ 5mΩ - 200mΩ –– –– SLN3 3W ±110: R<10mΩ ±75: R=>10mΩ 5mΩ - 110mΩ –– –– 10mΩ - 100mΩ (D: ±0.5%) SL3 3W ±180: R=<10mΩ ±100: R=>11mΩ 5mΩ - 100mΩ (F: ±1%) (J: ±5%) –– –– 3mΩ - 100mΩ 0.5mΩ Max. –– –– –– 10mΩ - 100mΩ 5mΩ - 100mΩ (D: ±0.5%) –– –– SLZ1** –– 4000 Max. TSL1 1W ±180: R=<13mΩ ±100: R=>15mΩ (D: ±0.5%) (F: ±1%) (G: ±2%) (J: ±5%) (D: ±0.5%) (F: ±1%) (G: ±2%) (J: ±5%) (D: ±0.5%) (F: ±1%) (G: ±2%) (J: ±5%) (D: ±0.5%) (F: ±1%) (G: ±2%) (J: ±5%) (D: ±0.5%) (F: ±1%) (G: ±2%) (J: ±5%) 10mΩ - 1MΩ 5mΩ - 1MΩ 3mΩ, 4mΩ 3mΩ ~ 22MΩ 10mΩ - 100mΩ 5mΩ - 100mΩ 3mΩ, 4mΩ 3mΩ ~ 100mΩ 5mΩ - 200mΩ 5mΩ ~ 1MΩ 3mΩ, 4mΩ 3mΩ - 22MΩ (F: ±1%) (J: ±5%) 5mΩ - 100mΩ Operating Temperature Range -55°C to +180°C * 3m, 4m, 5m, 6m, 7m, 8m, 9m also available inside resistance range ** SLZ1: Current rating: 44A *** Please contact factory for T.C.R.: ±50ppm/°C and ±75ppm/°C PAGE 2 OF 6 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-199 R20 4. Dimensions and Structure 4-1 Dimensions 4-2 Structure L 2 1 W b t Electrode c Molded Resistive Resin Element c a 3 1 Resistive Element Metal Plate: SL1 ≤ 100 mΩ, SL2 ≤ 360 mΩ, SL3 Thick Film: SL1 > 100 mΩ, SL2 > 360 mΩ 2 Flameproof Molded Epoxy Case with UL94V-0 Flammability Rating 3 End Termination with Tin/Lead Solder Plating Dimensions inches (mm) L W t a b c SL07/SLW07 .197±.012 .098±.008 .067±.008 .079±.008 .047±.008 .035±.012 (5.0±0.3) (2.5±0.2) (1.7±0.2) (2.0±0.2) (0.9±0.2) (1.2±0.3) (2010) Size Code SL1/SLW1, .248±.012 .122±.008 SLZ1 (2512) (6.3±0.3) (3.1±0.2) SL2/SL3 .453±.012 .276±.008 (11.5±0.3) (7.0±0.2) (4528) SLN2/SLN3 (4528) TSL1 (2512) .453±.012 (11.5±0.3) .248±.012 (6.3±0.3) .276±.008 (7.0±0.2) .122±.008 (3.1±0.2) .075±.008 .094±.008 .047±.008 .047±.012 (1.9±0.2) (2.4±0.2) (1.2±0.2) (1.2±0.3) .098±.008 .197±.008 .067±.008 .102±.02 (2.5±0.2) (5.0±0.2) (1.7±0.2) (2.6±0.5) .094±.008 (2.4±0.2) .039±.008 (1.0±0.2) .217±.008 (5.5±0.2) .094±.008 (2.4±0.2) .063±.008 (1.6±0.2) .028±.008 (0.7±0.2) .100±.016 (2.55±0.4) .047±.012 (1.2±0.3) 5. Rating Derating Curve (SL07, SL1, SL2, SLN2, TSL1) For resistors operated at an ambient temperature of 70°C or above, a power rating shall be derated in accordance with the above derating curve. (Please ask separately us about Derating Curve for SLW07, SLW1, SL3, SLN3, SLZ1). 100 % Rated Power 80 60 40 20 0 -60 -40 -20 -55 0 20 40 60 80 100 120 140 160 180 70 Ambient Temperature (°C) PAGE 3 OF 6 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-199 R20 Surface Temperature Rise TSL1/SLN2 SL1/SL2 200 SL07 SLN2 (2) 150 150 SL2 (2) TSL1 (2) 100 125 100 SL1 (2) 75 SL2 (1) 50 SL1 (1) 25 50 25 75 100 2 SLN2 (1) 1 75 TSL1 (1) 50 100 0 * TSL1: 20mΩ SLN2: 110mΩ 10mm pattern 0 25 50 1 75 SL07 (1) 50 0 100 75 * 20mΩ 10mm pattern 0 25 50 75 100 % Rated Power % Rated Power % Rated Power 2 SL07 (2) 25 25 * 33mΩ 10mm pattern 0 Temperature Rise (°C) 150 0 125 125 Temperature Rise (°C) Temperature Rise (°C) 175 Regarding the temperature rise, the value of the temperature varies per conditions and board for use since the temperature is measured under our measuring conditions. 5-1 Rating SL3 For temperature in excess of 110°C, the load shall be derated in accordance with the following figure. 100 80 5-2 Voltage Rating Resistors shall have a rated direct-current (DC) continuous working voltage or approximate sine-wave root-meansquare (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency and waveform corresponding to the power rating, as determined from the following formula: 60 40 20 0 E=√PxR -55 0 110 125 Ambient Temperature (°C) 180 Where: E = Rated voltage (V) P = Rated power (W) R = Nominal resistance (Ω) 6. Characteristics 6-1 High Frequency Characteristics PAGE 4 OF 6 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-199 R20 6-2 Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C Low Temperature Exposure Requirement ∆ R ±% Limit Typical Within specified — tolerance Within specified — T.C.R. SL07, TSL1,SL1, SL07, TSL1,SL1, SL2: ±1% SL2: ±1% SLN2: ±0.5% SLN2: ±0.25% SL07, TSL1,SL1, SL07, TSL1,SL1, SL2: ±1% SL2: ±1% SLN2: ±0.5% SLN2: ±0.5% SL07, TSL1,SL1, SL07, TSL1,SL1, SL2: ±1% SL2: ±0.5% SLN2: ±0.5% SLN2: ±0.25% SL07, TSL1,SL1, SL07, TSL1,SL1, SL2: ±2% SL2: ±0.5% SLN2: ±0.5% SLN2: ±0.25% SL07, TSL1,SL1, SL2: ±2% ±0.5% SLN2: ±1% ±0.5% ±0.25% Test Method 25°C +25°C/+125°C SL07: Rated power x 4 for 5 seconds, TSL1: Rated power x 2.5 for 5 seconds, SL1, SL2, SLN2: Rated power x 5 for 5 seconds, 260°C ± 5°C, 10 ± 1 second 260°C ± 5°C, 10~12 seconds -55°C (30 minutes), +150°C (30 minutes), 100 cycles -55°C (15 minutes), +150°C (15 minutes), 1000 cycles 40°C ± 2°C, 90%~95%RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 85°C ± 2°C, 85% ±3%RH, 1000 hours, Rated power x 0.1 70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle SL07, TSL1, SL1, SL2: -55°C, 1 hour; SLN2: -65°C, 24 hours 7. Taping 7-1 Dimensions of Carrier Tape 1.5 +0.1 -0 A B W 1.75±0.1 Carrier Tape P1 (TP) 2.0 4.0±0.1 P1 T1 T1 T1 Direction of feed (Notes) Dotted lines are applicable to only “TP” and “TB.” Component Size (mm) Type SL SLW SLN TSL 0.7 1 2/3 2/3 1 L W T 5.0 6.3 11.5 11.5 6.3 0.5 3.1 7 7 3.1 1.7 1.9 2.5 2.5 1 Carrier Tape Taping (mm) Quantity/ Reel (Pieces) A B W P1 T1 Reel Size 2000 1000 1000 1000 3000 5.5±0.1 6.8±0.1 12.2±0.1 12.2±0.1 3.4±0.1 3.1±0.1 3.6±0.1 7.7±0.1 7.7±0.1 6.6±0.1 12 12.0±0.1 24 24 12.0±0.1 4 8.0±0.2 12.0±0.1 12±0.2 4.0±0.1 2.25±0.10 2.35±0.1 3.1±0.1 3.1±0.1 1.3±0.1 180 180 255 225 180 TE TE TED TED TE PAGE 5 OF 6 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA SPEER ELECTRONICS, INC. SS-199 R20 7-2 Taped Configuration End tape (Empty) Dimensions in inches (mm) Leader tape (Top tape) (Empty) 1.57 (40) min. 3.15 (80) min. 5.90 (150) min. 7-3 Reel Dimensions Reel (mm) Type All øa Central hole ø13 ød (mm) 21 e (mm) 2 ød e (Notes) Reel holes, shapes and design are examples 8-1 Body and Marking 8. Recommended Land Pattern TSL1, SL1 & SL2 B D A Body color Black Marking color White Marking items Resistance value and tolerance C Soldering Pad Chip Component Type 07 SL/TSL SLN Dimensions millimeters Style Component Size A B C D 5.0 X 2.5 2.3 7.0 2.6 2.35 2.3 1 6.3 X 3.1 3.4 8.0 3.0 2-3 11.5 X 7.0 5.4 15.0 5.0 4.8 2/3 11.5 X 7.0 5.0 15.0 6.0 5.0 PAGE 6 OF 6 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.