MCSO family package 14×9 mm From 10 kHz up to 225 MHz DIMENSIONS Package: Bottom view Recommended Solder Pad: 2 2 2 3,1 2 4 3 4 3 1 2 2 5,6 9.3 7.3 1 14.1 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd 2.4 1.3 5.1 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Swiss made quality Customer specification on request All dimensions in mm (max) DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: -Avionics - Airbone equipments - Remote control - Security application - Radio Transceiver - Microprocessor clocks The MCSO's are supplied on trays (50 pcs / tray) For pick-and-place equipment, the parts are available in 24mm tapes with 250 parts min 500 parts max ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range (see ordering info) Including:adjustment at +25°C long term aging 10 years over supply voltage ±5% over load min to max ΔF/F ≤ ± 100 ppm Frequency stability version T Over temperature range (see ordering info) Including:adjustment at +25°C long term aging 1 year over supply voltage ±5% over load min to max ΔF/F ≤ ± 50 ppm Supply voltage ± 5% Vdd 2.5 / 3.3 / 5 V Idd see table 1 Input current 1)* Output signal HC-MOS compatible Symmetry at Vdd/2 40 / 60 % Rise & fall time ≤ 20MHz (load 15pf 20% to 80%) ≤7 ns Rise & fall time ≥ 20MHz (load 15pf 10% to 90%) ≤3 ns <0.4>Vdd-0.5 V 1/5 ms 3/47 pF Level "0" & "1" Start-up time (typ/max) Load min / max t * 1) C = 47nF ceramic must be connected between GND & Vdd TABLE 1: Idd Frequency (Without load) F=< 10MHz ≤ 20MHz >20 to 225MHz W = Vdd = 2.5V < 2mA < 3mA < 25mA V = Vdd = 3.3V < 4mA < 5mA < 30mA < 6mA < 7mA < 40mA blank = Vdd = 5V STANDARD FREQUENCIES: Frequency «MHz» 3.6864 16 4 8 10 12 12.8 14.7456 20 24 40 48 120 160 Other frequencies from 10 kHz up to 225 MHz on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance 10 to 2000Hz / 20g Shocks resistance 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering 260°C / 10s max Package Ceramic 14 x 9 x 2.4mm Lids Kovar Terminations option 2 on request GJ/L: with Au terminations J/L J/L: with tinned Ag/Cu/Zn J/Leads pins Height 3.8mm included J/Leads Pin 1 open→ Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 1μs - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO H V T - C 20MHz H blank ˃ 20MHz ≤ 20MHz W V blank = Vdd 2.5V = Vdd 3.3V = Vdd 5V T blank = ±50 ppm = ±100 ppm A B C X = 0 to +70°C = -40 to +85°C = -55 to +125°C = custom E/D GJ/L XXX option 1 E/D enable / disable option 2 blank Au plasted J/L = J-leads GJ/L = Au J-Leads customer spec N° Frequency A unique part number will be generated for each product specification: i.e: 20xxxx-DA00 xxx pcs (in foam tray) 200xxx-PP00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 11/02.2015